Digitus CAT 6 2 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Digitus CAT 6 2 (2 pagina's) in de categorie Stopcontact. Deze handleiding was nuttig voor 38 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
INSTALLATIONSANLEITUNG
DATENDOSE (GESCHIRMT)
INSTALLATION GUIDE
NETWORK OUTLET (SHIELDED)
15
20
30
35 15
20
30
35
10 1010 10
T 568AT 568B
1:1 Maßstab (Angaben in mm)
1:1 scale (Figures in mm)
Links/Left
Kabeleinführung linke Seite.
Cable entry left side.
Rechts/Right
Kabeleinführung rechte Seite.
Cable entry right side.
Step 1:
REMOVE THE CABLE SHEATH
Carve the cable jacket by 45 mm. Remove the
carved cable jacket. Cut braided shield at 10 mm
and push back over cable jacket. Shorten the foil
shielding.
Schritt 1:
KABELMANTEL ENTFERNEN
Kabelmantel nach 45 mm einritzen. Entfernen
Sie den eingeritzten Kabelmantel. Schirmge-
echt auf 10 mm kürzen und über Kabelmantel
zurückschieben. Schirmfolie kürzen.
1. Paar/Pair
2. Paar/Pair
3. Paar/Pair
4. Paar/Pair
45 mm
(S/FTP)
Step 2:
CONNECTION (T568A / T568B)
Fix the data cable with a cable clamp and tighten
the screw. Both data cables are xed at the same
time.
Lay the wires in the insulation displacement
clamp according to the speci ed coding. The
twisting must be maintained up to the insulation
displacement terminal!
Schritt 2:
ANSCHLUSS (T568A / T568B)
Fixieren Sie das Datenkabel mittels Kabelschelle
und ziehen Sie die Schraube an. Es werden
gleichzeitig beide Datenkabel xiert.
Legen Sie die Adern gemäß vorgegebener Kodie-
rung in der Schneidklemme. Die Aderverdrillung
muss bis zur Schneidklemme aufrechterhalten
bleiben!
Anlegewerkzeug
Punch tool
DN-LSA-PT
T568A
Belegung nach T568A
Con guration according to T568A
Links/Left
Kabeleinführung linke Seite.
Cable entry left side.
Links/Left
Kabeleinführung linke Seite.
Cable entry left side.
Rechts/Right
Kabeleinführung rechte Seite.
Cable entry right side.
Rechts/Right
Kabeleinführung rechte Seite.
Cable entry right side.
T568B
Belegung nach T568B
Con guration according to T568B
8 37 5 26 4 1 8 37 5 26 4 1
8 37 5 26 4 1 8 37 5 26 4 1
8 37 5 26 4 1 8 37 5 26 4 1
8 37 5 26 4 1 8 37 5 26 4 1
Pressen Sie die Adern mithilfe eines Anlegewerk-
zeugs (DN-LSA-PT) in die Schneidklemme und
schneiden Sie die überschüssigen Kabelenden ab.
Press the wires into the insulation displa-
cement clamp with the help of a punch tool
(DN-LSA-PT) and cut off the excess wire ends.
DE - Hiermit erklärt die ASSMANN Electronic GmbH, dass sich der Artikel in Übereinstimmung mit
den Anforderung und Vorschriften der RoHS Richtlinie 2011/65/EU be ndet. Die vollständige Kon-
formitätserklärung können Sie postalisch unter der unten genannten Herstelleradresse anfordern.
EN - ASSMANN Electronic GmbH declares that the product complies with the requirements and pro-
visions of RoHS directive 2011/65/EU. You can request the complete Declaration of Conformity by
post at the manufacturer’s address as stated below.
FR - Par la présente, Assmann Electronic GmbH certi e que le produit est conforme aux exigences
et aux réglementations des directives RoHS 2011/65/EU. La déclaration de conformité complète
peut être demandée par post à l´adresse du fabricant ci-dessous.
ASSMANN Electronic GmbH,
Auf dem Schüffel 3, 58513 Lüdenscheid, Germany
Manufactured in P.R.C.


Product specificaties

Merk: Digitus
Categorie: Stopcontact
Model: CAT 6 2

Heb je hulp nodig?

Als je hulp nodig hebt met Digitus CAT 6 2 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Stopcontact Digitus

Handleiding Stopcontact

Nieuwste handleidingen voor Stopcontact