Dexter T-400 Handleiding
Pagina's 34 Engels Wasmachine
Bekijk de handleiding van Dexter T-400 gratis online of download de PDF. 46 mensen vonden deze handleiding nuttig. Vraag over dit model? Stel een vraag
8-5- 1 51422001 REV Apage
COMMERCIAL WASHER
MODEL T- 400VENDED
C- SERIESCONTROL
OPERATOR’S MANUAL
INSTALLATION & OPERATION
INSTRUCTIONS
Please read this information and retain for reference.
WARNING - THIS WASHER IS EQUIPPED WITH DEVICES AND FEATURES RELATING TO ITS SAFE
OPERATION. TO AVOID INJURY OR ELECTRICAL SHOCK, DO NOT PERFORM ANY SERVICING UNLESS
QUALIFIED TO DO SO.
IT IS THE RESPONSIBILITY OF THE OWNER TO CHECK THIS EQUIPMENT ON A FREQUENT
BASIS TO ASSURE ITS SAFE OPERATION.
A machine should not be allowed to operate if any of the following occur:
- Excessively high water level.
- If machine is not connected to a properly grounded circuit.
- If the door does not remain securely locked during the entire cycle.
- Vibration or shaking from an inadequate mounting or foundation.
WARNING - FOR SAFETY
1. Always shut off power and water supply before servicing.
2. Do not overload the washer.
3. Do not open door when cylinder is in motion or it contains water.
4. Do not bypass any safety devices of this washer.
5. Do not use volatile or flammable substances in or near this washer.
6. Keep all panels in place. They protect against shock and injury and add rigidity to the washer.
PREVENTIVE MAINTENANCE REQUIREMENTS
DAILY
- Check that the loading door remains securely locked and cannot be opened during the entire cycle.
- Check the water connections for leaks.
- Clean the top and sides of the cabinet to remove residue.
- Clean the soap dispenser and lid and check that all dispenser mounting screws are in-place and tight.
- Check the drain valve for leaking and that it opens properly.
- Check the loading door for leaks. Clean the door seal of all foreign matter.
- Leave the loading door open to aerate the washer when not in use.
QUARTERLY
- Make sure the washer is inoperative by switching off the main power supply.
- -Check the Vbelts for wear and proper tension.
- Clean lint and other foreign matter from around motor.
- Check all water connections for leaks.
- Wipe and clean the inside of the washer and check that all electrical components are free of moisture
and dust.
- Remove and clean water inlet hose filters. Replace if necessary.
- Check anchor bolts - retighten if necessary
IMPORTANT: Replace any and all panels that were removed to perform daily and/or quarterly
maintenance.
Product specificaties
| Merk: | Dexter |
| Categorie: | Wasmachine |
| Model: | T-400 |
Heb je hulp nodig?
Als je hulp nodig hebt met Dexter T-400 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Wasmachine Dexter
Dexter T-900 Handleiding Dexter T-1200 Handleiding Dexter T-600 Handleiding Dexter T-350 Express Handleiding Dexter T-300 Handleiding Dexter T-950 Express Handleiding
Alle Dexter Wasmachine handleidingen
Handleiding Wasmachine
Nieuwste handleidingen voor Wasmachine
Candy GD 410B9B-80 Handleiding Hoover HBP 49SBL10UC-80 Handleiding BEKO TB621DBVESPL Handleiding Bosch WGJ254A9NL Handleiding BEKO TB721DAVESCS Handleiding BEKO B3WFT6104012WBC SPT Handleiding BEKO TB721DBVESPL Handleiding LERAN WMS 12800 WD3 Handleiding Hisense WD3I1143BTL Handleiding BEKO BMWRU3821W Handleiding