Denver CVC-1863 Handleiding
Pagina's 1 Stofzuiger
Bekijk de handleiding van Denver CVC-1863 gratis online of download de PDF. Deze handleiding is 1 keer bekeken. Vraag over dit model? Stel een vraag

100mm
140mm
CVC-1863
denver.eu
08-2026
Please read the safety instructions carefully before using the
product for the first time and keep the instructions for future
reference.
• Warning: This product has a built-in lithium polymer battery.
• Regularly clean filters and empty the dust bin to avoid
abnormal function.
• Do not use this vacuum cleaner without the filters inserted.
• Do not put any object into the vacuum's openings. Do not
use the vacuum with any opening blocked. Keep free of dust,
lint, hair, or other items that may reduce airflow or break the
product.
• Check the area to be cleaned before use. Do not vacuum
flammable or explosive substances (liquids, gases), etc.
• Do not use this vacuum cleaner to vacuum chemical
products, cement, or similar particles.
• Never vacuum sharp objects.
• Keep the product out of reach of children and pets to avoid
chewing and swallowing.
• Do not use the vacuum outdoors or expose this product to
rain or damp conditions. The product is not waterproof.
• Keep the vacuum cleaner away from heaters, ovens, or other
heating appliances.
• Please have this product repaired at a professional repair
shop. Unprofessional repairs may result in product damage or
personal injury.
• Do not touch the power switch or other areas of the device
with wet hands or place the vacuum in wet areas, as the
vacuum is not waterproof.
• Do not place this item near sources of water or heat or
expose it to direct sunlight.
• Product operating and storage temperature is from 0°C to
40°C. Operating or storing below or above this temperature
may affect function.
• This item is intended for household use only.
• Please use the included adapter to charge the device. Do not
use non-original accessories together with the product, as this
may cause the product to malfunction.
Denver A/S reserves the right for printing errors.
Denver A/S cannot be held responsible for any technical or
typographical errors and reserves the right to make changes
to the product and manuals without prior notice. If you
detect any inaccuracies or omissions, please inform us at the
address on the back cover.
Safety Information
LED Display
A. Battery level display
B. Speed adjustment display
Please notice - All products are subject to change without any notice.
We take reservations for errors and omissions in the manual.
ALL RIGHTS RESERVED, COPYRIGHT DENVER A/S
denver.eu
Electric and electronic equipment and included batteries
contains materials, components and substances that can be
hazardous to your health and the environment, if the waste
material (discarded electric and electronic equipment and
batteries) is not handled correctly.
Electric and electronic equipment and batteries is marked
with the crossed out trash can symbol, seen above. This
symbol signifies that electric and electronic equipment and
batteries should not be disposed of with other household
waste, but should be disposed of separately.
As the end user it is important that you submit your used
batteries to the appropriate and designated facility. In this
manner you make sure that the batteries are recycled in
accordance with legislature and will not harm the environ-
ment.
All cities have established collection points, where electric and
electronic equipment and batteries can either be submitted
free of charge at recycling stations and other collection sites,
or be collected from the households. Additional information is
available at the technical department of your city.
Information on standby/off mode power consumption and
power management for products compliant with Commission
Regulation (EU) 2023/826 can be found at the following
internet address: denver.eu and then click the search ICON on
topline of website. Write model number: CVC-1863 and enter
the page.
Warning!
-Lithium battery inside!
DENVER A/S
Omega 5A, Soeften
DK-8382 Hinnerup
Denmark
www.denver.eu
www.facebook.com/denver.eu
ENG 1ENG 2ENG 4ENG 5ENG 6ENG 7ENG 8ENG 9ENG 3
1. Preparation
Check whether the battery is fully charged before use. It is
recommended to charge for more than 5–6 hours before the
first use to ensure the maximum performance of the product.
Select the required accessories according to the cleaning
area/surface.
2. Start cleaning
Press the power button once to start the machine in Eco
mode, press it again for Standard mode and again for Turbo
mode, and press it again to shut down the machine.
NOTE:
Please make sure the electric cleaning head is folded down to
the floor before cleaning. If you have clicked the cleaning
head into standing position, please put pressure on the
cleaning head with your foot and push it down to the floor
before cleaning.
3. Clean the dust cup
For optimal performance, empty the dust container and clean
the filters inside every 5–7 cleaning cycles.
After turning off the motor, press the button to remove the dust
cup cover, pour out the dust, and then close the cover until you
hear a clicking sound.
4. Replace the HEPA filter
Take the metal dust cup filter out by rotating it to the left and
replace the HEPA filter inside.
Afterward, place the new HEPA filter assembly into the metal
dust cup filter and rotate it in the direction indicated until it
clicks into place.
Charging
• It takes about 4–5 hours to fully charge from empty.
• Use the power adapter included for charging. Connect the
power adapter to a suitable wall socket and connect the
attached cable to the charging port of the product.
• During the charging process, the charge indicator on the
power adapter will remain red and turn green when fully
charged.
Battery indicator
Note: When the battery capacity is low, the battery status
indicator will flash.
The battery status indicator has 3 lights to indicate the battery
capacity.
Application scenarios
Floors, carpets, etc.
The pushing force may vary depending on
the carpet material. If you feel it’s too hard
to push, switch
SWITCH
ENG 10ENG 11
Operating Instructions
Installation
1. Insert the telescopic aluminum tube into the cleaning
head port until it clicks.
To detach, press the pipe disassembly button with one hand,
hold the tube with the other, and pull it out.
2. Insert the metal tube into the electric cleaning head’s
suction port until it clicks.
To detach, press the electric cleaning head’s release button
with one hand, hold the electric cleaning head with the
other, and pull the tube off.
Same method to attach the flat suction head or the
two-in-one brush head.
Wall-mount Installation (Recommended height 110
cm–130 cm)
1. First, secure the wall-mounted rack by using the supplied
screws (Select a position close to a charging socket to
facilitate plug-in charging for this cordless model.)
2. Install the wall-mounted rack at the height (as shown in
the figure below). Make sure the cleaning head can fully
touch the floor.
PREPARATION BEFORE USE
Warning:
Before installing the accessories, the machine must be powered off!
Run Mode and Runtime
NOTE:
• Ocial run time is the time the machine runs without any
surface or debris attached.
• Actual run time will vary based on power mode, battery
capacity, amount of debris attached, and area/surface being
cleaned.
Turbo mode working time: 15–20 minutes
Standard mode working time: 25–30 minutes
Eco mode working time: 35–40 minutes
Daily maintenance
To ensure maximum performance of your vacuum cleaner,
clean and maintain its components regularly.
• Clean the handheld part of the main motor.
• Please turn off the vacuum cleaner before cleaning it.
• Wipe the surface inside the dustbin with a clean cloth; avoid
water entering the vacuum cleaner.
• Clean the metal filter and HEPA filter every 5–7 cycles.
• After cleaning, do not place the vacuum cleaner in direct
sunlight or in a humid place.
Important Tips!
1. Please check and clean the metal filter and HEPA filter
regularly.
2. If the suction power decreases, please clean the metal filter
and HEPA filter element in time.
3. Replace the metal filter and HEPA filter if they are damaged
or can no longer maintain the vacuum cleaners suction power.
4. Do not bend or squeeze the HEPA filter.
Clean the filters
1. Hold the main motor, press the button to open the cover,
then take out the filters by turning the dust cup holder to the
left inside. Take out both the metal filter and the small HEPA
filter individually (as shown in the figure below).
• The metal filter is washable. However, the HEPA filter can only
be cleaned with a cleaning brush and be rinsed MUST NOT
with water.
• Make sure both filters are completely drybefore returning
them to the vacuum cleaner.
Cleaning the removable roller brush
1. Open the side lock at the bottom of the cleaning head,
remove the side cover, and take out the roller brush.
2. Cut and remove tangled hair to maintain the roller brush.
Note: The suction port must always be kept clear of any
obstructions. Otherwise, the motor will overheat and may be
damaged.
Warning!
Before cleaning the electric floor brush, remove the roller brush
from the unit.
2. If the dust bin is too dirty,
you can clean the metal filter
with cold water and clean
the small HEPA filter with a
cleaning brush, not with
water (cleaning brush not
included)
3. Before reinstalling the
metal filter and HEPA filter
element, please make sure
the accessories are
completely dry.
Machine Parts
1. Battery pack
2. Air outlet
3. Main motor
4. Charging port
5. Dust collection cup bottom cover
6. Dust collection cup
7. One-tap dust removal button
8. Connection pipe disassembly button
9. Telescopic aluminum tube
10. Cleaning head disassembly button
11. Electric cleaning head
12. LED dust headlight
13. Flat suction head
14. Two-in-one brush head
15. Wall-mount
16. Power adapter
Car interiors, sofa crevices, etc.
→ Crevice tool
Sofas, desktops, furniture surfaces, etc.
→ Brush nozzle
Windowsill crevices, sliding door
grooves, etc.
→ Crevice tool
Adapter indicator light
On work
- 6 lights on: fully charged
- 4 lights on: battery power 55%–90%
- 2 lights on: battery power 0 %–55%
HEPA filter
HEPA filter
Troubleshooting
QuestionSolutionTriggering Cause
The product
stops working
or will not
turn on
Low or dead battery
Dust collection cup
/connecting pipe is
blocked
The roller brush is
tangled with hair
Charge the battery
Clear the blockage
Clean the roller
brush and remove
tangled hair
The roller
brush stops
rotating
The roller brush is
tangled with hair
Clean the roller
brush and remove
the side covers to
remove tangled hair
Decreased
suction
Dust bin screen or
filters are full of dust
No filters are
installed
The roller brush is
tangled with hair
Clean the dust bin
screen and/or filters
Install the filters
Clear the blockage
The motor
makes
strange
noises
The main suction
port or extension
rod is blocked
Clear any obstruction
from the main
suction inlet or
extension rod
Battery won't
charge
Using the wrong
adapter
Loose connection
between the power
cable and the
battery
Use the correct
adapter included
Make sure the power
cord is plugged in
securely
denver.eu
facebook.com/denver.eu
Contact
Main contact point: contt.hq@deru acnve.e
Nordics
Headquarter
Denver A/S
Omega 5A, Soten ef
DK-8382 Hinnerup
Denmark
Phone: +45 86 22 61 00
(Push “1” for suppt) or
E-Mail
For tecical questions, plse write to: hnea
suort.hq@deer.eu ppnv
Germany
Denver Germany GmbH Service
Service Center
Max-Emanuel-Str. 4
936 Passau 40
Phone: +49 851 379 369 40
E-Mail
suorde@deer.eu ppt.nv
Monday - Thursday 09:00 - 16:30
Friday 09:00 - 14:00
For all other questions plse writea
e to:
contact.hq@de.eu nver
Benelux
DENVER BENUX B.V. EL
Barwoutswaarder 13C+D
3449 HE Woerden
The Netherlands
Phone: 0900-3437623
E-Mail: suort.nl@denver.eu pp
Spain/Portugal
DENVER SPAIN S.A
Ronda Augustes y Louis Lumiere, nº 23 – nave
16
Parque Tecnológico
48PATERNA 690
Valencia (Spain)
Spain
Phone: +34 960 046 883
Mail: suort.es@deer.eu ppnv
Porgal: tu
Phone: +35 1255 240 294
E-Mail: denver.svice@satfiel.com er
Austa ri
Lurf Premium Service GmbH
Deutsctrae 1 hsss
1230 Wien
Phone: +43 1 9 3085 04
E-Mail: denverrfservice.at @lu
Poland
LetMeRepair Poland . z o.o. sp
ul. Czstochowska 140 ę
62-800 Kalisz
Phone: 62 75 38 092
E-Mail: denver-serviceetmepair.pl @ler
Godziny pracy: 8 – 18 (poniedziaek – piłątek)
If your country is not listed above,
please write an email to
contact[email protected]u
Denver A/S
Omega 5A, Soten ef
DK-8382 Hinnerup
Product specificaties
| Merk: | Denver |
| Categorie: | Stofzuiger |
| Model: | CVC-1863 |
Heb je hulp nodig?
Als je hulp nodig hebt met Denver CVC-1863 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Alle Denver Stofzuiger handleidingen