Denver BTH-205 Handleiding

Bekijk gratis de handleiding van Denver BTH-205 (3 pagina’s), behorend tot de categorie Hoofdtelefoon. Deze gids werd als nuttig beoordeeld door 75 mensen en kreeg gemiddeld 4.3 sterren uit 6 reviews. Heb je een vraag over Denver BTH-205 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

BT Headphone Manual

Congratulations with your new Bluetooth headset. Please read this manual before using it to make sure you

use it correct.

Headset overview

English English

Next Song/Volume+Next Song/Volume+

On & Off/Play & PauseOn & Off/Play & Pause

Previous Song/Volume-Previous Song/Volume-

Indicator Indicator

Mic Mic

Line-in Line-in

Micro USB charging portMicro USB charging port

Pairing

1. Ensure that your phone or Bluetooth device is switched on.

2. To pair the headset that has not been previously paired with a device, please switch on the headset by

push and hold power button for approximately 5 seconds., the headset starts in Bluetooth search mode

(red/blue light flashes quickly and alternately and there is a prompt tone). Press and hold the power key

for 3 seconds, it will go into reconnection mode.

3. Activate Bluetooth on your phone or Bluetooth device, and set it to search for Bluetooth device.

4. Select “DENVER BTH-205” from the list of found devices on your phone or Bluetooth devices.

5. When Bluetooth is paired successfully, there will be prompt tone and the blue light turns to lighting

continuously.

Switch On

After unit has been paired (look above), just hold power until the LED lights up and then let go. When it has

been paired it will automatically reconnect once turned on.

Switch Off

To switch off, press and hold the Power key about 3 seconds. There is a prompt tone and a red indicating

light. If the headset is not connected to a device within 10 minutes, it switches off automatically.

Product specificaties