Denon POA-5200 Handleiding


Lees hieronder de šŸ“– handleiding in het Nederlandse voor Denon POA-5200 (1 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 128 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/1
N E W M O D E L I N F O R M A T I O N
The POA-5200 dual monaural power ampliļ¬er provides superb stereo reproduction, and is an ideal choice for adding additional
ampliļ¬er channels to a multi-channel system. For example, when combined with Denonā€™s AVR-4800 THX Surround EX A/V receiver,
the POA-5200 can be used as the stereo front channels (left and right) ampliļ¬er, or the surround center back channels ampliļ¬er.
The POA-5200 meets Lucasļ¬lmā€™s stringent THX Ultra certiļ¬cation requirements, and provides 120 watts of power per channel, RMS
into 8 ohms, and 200 watts of power per channel, RMS into 4 ohms.
THX Ultra Certiļ¬ed 2-channel Power Ampliļ¬er.
ā– THX Ultra Certiļ¬ed
Lucasfilmā€™s stringent THX Ultra certification for power amplifiers includes
dozens of tests and specification requirements, all to ensure accurate
reproduction of motion picture soundtracks and musical performances. All
aspects of power amplifier performance are thoroughly verified, to ensure
inaudible noise, wide dynamic range, extended frequency response with
accurate spectral response, and the ability to drive any modern loud-
speaker regardless of impedance or eļ¬ƒciency.
ā– Dual Monaural Conļ¬guration
Unlike conventional stereo power amplifiers, which rely upon a shared
power supply for both amp channels, the POA-5200 features Denonā€™s
perfect Dual Monaural Configuration, with a separate high current power
transformer and DC storage supply section for each amplifier channel.
This provides the widest dynamic range, along with tremendous reserve
capacity, compared to conventional stereo amplifiers.
ā– Stabilized DC Characteristics
The use of a FET for difference input of one package type with superior
direct current (DC) temperature characteristics and the ability to fine-adjust
each channel individually have realized a high precision of 1 mV or less
(standard value) in the output DC voltage of the POA-5200. This high-
precision voltage is approximately one tenth that of conventional models
and is the main reason these models are able to reproduce low-level
signals with such exceptional ļ¬delity.
ā– A-B Speaker switching for each channel
One or two pairs of speakers can be connected to the POA-5200, and
each pair can be activated or deactivated via front panel A-B speaker
switching. Both pairs can be driven at once, if desired.
ā– Strictly Selected Parts for High Sound Quality
A large number of high-performance parts, such as the electrolytic
capacitor customized for high sound quality, OFC wiring material, ļ¬lm
capacitor and resistors, have all been subject to stringent listening tests
during their selection process to ensure unfettered, high-grade sound
reproduction.
ā– Remote Power ON/OFF
Rear panel mounted remote power on/oļ¬€ terminals are provided, for
connection to Denon components such as the AVR-4800, for one-button
power turn-on and turn-oļ¬€ convenience. This allows the power ampliļ¬er
to be mounted in an out-of-the-way location, thereby saving valuable
shelf space for more importantly accessible source components, for
example.
Speciļ¬cations
Rated output ............................... 120 W (8 ohms, 20 Hz - 20 kHz,THD 0.02 %)
200 W (4 ohms, 1 kHz, THD 0.5%)
Total harmonic distortion............. 0.008 % (-3 dB at rated output,
8 ohms, 20 Hz - 20 kHz)
Inter modulation distortion........... 0.002 % (60 Hz/7 kHz :
4/1 at rated output, 8 ohms)
Frequency response ................... 1 Hz - 100 kHz +0, -3 dB (at 1 W)
Input sensitivity ........................... 1.1 V
Input impedance ......................... 47 kohms
Output impedance....................... 0.1 ohms (1 kHz)
Signal-to-noise ratio.................... 110 dB (IHF, A-weighting)
Speaker....................................... A or B 4 ohms - 16 ohms
A + B 8 ohms - 16 ohms
Power supply .............................. AC 120V, 60 Hz
Power consumption .................... 4.7 A
Dimensions ................................. 434 (W) x 135 (H) x 353 (D) mm
17.1ā€(W) x 5.3ā€(H) x 13.9ā€(D)
Weight......................................... 12.3 kg, 27.1 lbs
POA-5200
2-channel Power Ampliļ¬er
DENON ELECTRONICS. NIPPON COLUMBIA CO., LTD.
DIVISION OF DENON CORPORATION (USA) 14-14, AKASAKA 4-CHOME, MINATO-KU, TOKYO 107-8011, JAPAN
222 NEW ROAD, PARSIPPANY, NEW JERSEY 07054, USA http://www.denon.co.jp
TEL: 973-396-0810 http://www.del.denon.com
DENON CANADA INC.
17 DENISON STREET, MARKHAM ONTARIO, CANADA L3R 1B5
TEL: 905-475-4085 11961299 A Printed in Japan
*Design and speciļ¬cations are subject to change without notice.
*THX is a registered trademark of Lucasļ¬lm Ltd.
*ā€œDolbyā€, ā€œDolby Digitalā€, ā€œPro Logicā€, and the double-D device are registered trademarks of
Dolby Laboratories Licensing Corporation.


Product specificaties

Merk: Denon
Categorie: Niet gecategoriseerd
Model: POA-5200

Heb je hulp nodig?

Als je hulp nodig hebt met Denon POA-5200 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Denon

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd