Denon DHT-1356XP Handleiding

Denon Home cinema set DHT-1356XP

Lees hieronder de 📖 handleiding in het Nederlandse voor Denon DHT-1356XP (2 pagina's) in de categorie Home cinema set. Deze handleiding was nuttig voor 28 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2

DHT-1356XP (AVR-1306 + SYS-56HT)

5.1ch Home Theater in a Box

■ High-Quality Surround Sound Reproduction

• High Resolution 32bit Floating Point DSP

• 96 kHz Processing Circuit

■ Fully Discrete, Equal Power 5 Amplifier Channels, 75 Watts Each

Front 75 W + 75 W (8 ohms, 20 Hz - 20 kHz, 0.08 % THD)

Center 75 W (8 ohms, 20 Hz - 20 kHz, 0.08 % THD)

Surround 75 W + 75 W (8 ohms, 20 Hz - 20 kHz, 0.08 % THD)

For optimum Dolby Digital and DTS reproduction, the AVR-1306 features high quality, wideband

audio amplification, providing 75 watts power output for each of the 5 main channels. A large

capacity power supply includes a high current power transformer along with discrete power

output devices on all 5 amplifier channels for highest dynamic range and superb reproduction

clarity.

■ DENON's Basic Design for High-Quality Sound Reproduction

• Power Transformer for High Power Driven

The chassis that supports the large transformer has been designed to absorb vibration, and

the transformer is housed inside a highly rigid frame to secure it more solidly to the chassis. In

addition, a cushioning material has been placed around the core of the transformer to minimize

interference on the signal and enable more faithful reproduction of the original sound. The AVR-

1306 inherits these low-noise design from higher-end models.

• Twin Drive Rectifier

DENON's Twin Drive Rectifier design uses two rectifying diodes in parallel to bring out the maxi-

mum potential of the large transformer. Since the rectifiers recharge the large block capaci-

tors at low impedance, they are able to supply ample current to reproduce deep basses as well

as sudden bursts of sound from percussion or other musical instruments.

• Large Aluminum Extruded Heatsink

DENON uses large heatsink made of extruded aluminum. They have been placed in a design

that ensures mostly uniform temperatures throughout the heatsink so that the output transis-

tors for all channels can be driven under uniform conditions. This in turn ensures that all

channels respond with equal performance to the demands of the audio signals.

■ Wide-Range Play Capability for DVD-Audio and Super Audio CD

The power amp circuits of the AVR-1306 have been meticulously designed to reproduce the

exceptionally high sound quality with wide frequency response from 10 Hz to 100 kHz.

■ Cinema Equalizer

The sound from movie sources recorded in Dolby Digital, DTS or other formats emphasizes

high-frequency range due to a theater’s front speakers being placed behind the movie

screen. If this sound is reproduced in the home theater without correction, the high-frequency

range is too strong. The AVR-1306 features a Cinema Equalizer to correct these high-

frequency components so that the sound is clearer and easier to listen to.

(For Dolby Digital, Dolby Pro Logic II, Dolby Digital and DTS surround modes)

■ Personal Memory Plus, for Easy Operation

The AVR-1306 includes the Personal Memory Plus function that automatically remembers

the surround mode you last used for each program source, so that you do not need to select

the mode again for that program.

■ Acclaimed Customization Feature

As with all of DENON’s high-grade A/V receiver, the AVR-1306 lets you adjust delay times

and other parameters so that you can customize the performance of the AVR-1306 to suit

your own home theater and enhance operating ease. The adjustments are easy to make

via a dialog format on the fluorescent display on the front panel. These customized features

are then stored, for each source input and surround mode, in Personal Memory Plus so

constant readjustments are not required.

■ Multi-Function Preset Memory Remote Controller with Glo-keys

■ DENON's Latest Surround Technology Faithfully Recreates the

Surround Sound Produced at the Dubbing Stage.

• DTS 96/24 Decoding for DVD-Video

• DTS (NEO:6)

• Dolby Digital

• Dolby Pro Logic II

■ 5 Channel Stereo Mode

DENON's popular 5 Channel Stereo mode transforms your favorite 2-channel sources such

as CD, tape, stereo radio and stereo video sources into exciting surround sound, free of

delay effects and unnatural artifacts, from all 5 speakers. This 5 Channel Stereo mode was orig-

inally developed by DENON to enhance music lovers' enjoyment with home theater ambience.

■ DENON DSP Surround Modes Add Listening Excitement

Put yourself in the middle of your favorite concert hall and music environments with DENON's

DSP acoustic environment simulation modes. These DSP modes add spacious surround

sound enhancements to your favorite music and video sources, and include these distinctly

different sounding effects:

1. 5 Channel Stereo 5. Video Game

2. Virtual Surround 6. Matrix

3. Rock Arena 7. Mono Movie

4. Jazz Club

■ Adjustable Cross-Over Switching

The AVR-1306 supports subwoofer cross-over switching with a choice of 8 cross-over fre-

quencies: 40/60/80/100/120/150/200/250Hz. This lets you more accurately match

the performance characteristics of the subwoofer to the main speaker system.

Other features

■Night Mode for not disturbing others

■ Front Panel Inputs

■ Front A/B Speaker Terminals

■ Frequency Synthesis Tuning

• 56-Station AM/FM Random Preset Memory Tuning

• Auto Preset Memory

Input/Output Terminals for Every A/V System (AVR-1306)

Audio Inputs

8 Analog Inputs CD, (TUNER), DVD/VDP, TV/DBS,

AUX, VCR, CDR/TAPE, V.AUX(FRONT)

6 Analog EXT. Inputs FRONT L/R, CENTER,

SURROUND L/R, SUBWOOFER

3 Digital Inputs OPTICAL X 1

COAXIAL X 2

Audio Outputs

1 Analog PRE OUT Terminal SUBWOOFER

2 Analog REC OUT Terminals VCR, CDR/TAPE

Video Inputs

4 Composite Inputs DVD/VDP, TV/DBS, VCR, V.AUX (FRONT)

Video Outputs

2 Composite Outputs VCR, MONITOR

Specifications

■AVR-1306

Power Amplifier Section

Rated output *THD figures are power amp stage values.

Front 75 W + 75 W (8 ohms, 20 Hz - 20 kHz, 0.08 % THD)

110 W + 110 W (6 ohms, 1 kHz, 0.7 % THD)

Center 75 W (8 ohms, 20 Hz - 20 kHz, 0.08 % THD)

110 W (6 ohms, 1 kHz, 0.7 % THD)

Surround 75 W + 75 W (8 ohms, 20 Hz - 20 kHz, 0.08 % THD)

110 W + 110 W (6 ohms, 1 kHz, 0.7 % THD)

Preamplifier Section

Input sensitivity/Impedance

CD, DVD/VDP, TV/DBS, VCR, CDR/TAPE, AUX,V.AUX(FRONT)

200 mV/47 kohms

Output level/Load impedance

SUBWOOFER 1.2 V/10 kohms

CDR/TAPE, VCR 200 mV/47 kohms

Frequency response 10 Hz - 100 kHz (+1, -3 dB) (Tone Defeat On)

Signal-to-noise ratio 98 dB (IHF-A weighted) (Tone Defeat On)

Tone control Treble: ±10 dB at 10 kHz

Bass: ±10 dB at 100 Hz

FM Section

Tuning frequency range 87.5 - 108.0 MHz

Usable sensitivity 1.0 µV (11.2 dBf)

AM Section

Tuning frequency range 522 - 1611 kHz

Usable sensitivity 18 µV

General

Power supply AC 230 V, 50 Hz

Power consumption 350 W

Dimensions 434 (W) x 147 (H) x 417 (D) mm

Weight 10.4 kg

■ 5.1 ch Speaker System: SYS-56HT

SC-A56 (Satellite speaker system)

Type Full-range 2 speakers

Magnetic shielding Yes

Input impedance 6 ohms

Dimensions 84 (W) x 189 (H) x 110 (D) mm

Weight 1.2 kg

SC-C56 (Center speaker system)

Type Full-range 2 speakers

Magnetic shielding Yes

Input impedance 6 ohms

Dimensions 263 (W) x 84 (H) x 110 (D) mm

Weight 1.4 kg

DSW-56 (Subwoofer system with built-in Amplifier)

Driver unit 16 cm Woofer p2-x1

Amplifier Output 50W (6ohms) / 100 W (Dynamic Power)

Input impedance 22 kohms

Power supply AC 230 V, 50 Hz

Dimensions 210 (W) x 353 (H) x 379 (D) mm (with feet)

Weight 9.2 kg

DHT-1356XP

* Design and specifications are subject to change without notice.

* Dolby” ”, “Dolby Digital”, “Pro Logic II Dolby Digital and the double-D device are registered trademarks of Dolby Laboratories Licensing Corporation.” “, ”

* DTS is registered trademarks of DTS Technology.

Denon Brand Company

Kayabacho Tower 14F 1-21-2 Shinkawa, Chuo-ku, Tokyo 104-0033, Japan

www.denon.com

53201205

AVR-1306’s back panel