Denon DJ DN-S5000 Handleiding

Bekijk gratis de handleiding van Denon DJ DN-S5000 (49 pagina’s), behorend tot de categorie CD-spelers/recorder. Deze gids werd als nuttig beoordeeld door 39 mensen en kreeg gemiddeld 4.1 sterren uit 5 reviews. Heb je een vraag over Denon DJ DN-S5000 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

DN-S5000 Quick Start Guide

Track Change:Turn the rotary knob (on the upper right side) to desired track.

Search/Scan: Move the “Fast Search” lever to search forward or search back.

Skip Search: Quickly shift and release the “Fast Search” lever to its end for 1-min hops.

Frame Search:Turn the scratch mode knob to “Search”turn the top scratch disc until point is

found, press main CUE to save your new point.

Scratch:Insert Disc, turn scratch mode Knob to “MAIN”, press lower left PLAY button,

manipulate the top vinyl disc as desired.

Scratch Lever: Select “Both” for natural scratching. Select “Fwd” to mute the reverse sound

of audio.

Hot Disc:During play mode, press and hold the “Eject” button for more than 1 sec,

remove disc & insert new. Monitor, mix & play as normal.

Hot Starts:Press the A1 or A2 button to set a cue point during play. Press the same

button again to re-trigger.

Clear Hot Starts:Press and hold the “FLIP” button corresponding to the same row for more

than 1 sec.

Alpha Track:During Main play, press the alpha mode button, select track, monitor & mix

your Alpha track through the mixer.

Mirror Mix:During Main play, press and hold the alpha mode button for more than 1 sec,

press alpha play to start.

Pitch Range:Press and hold the “Pitch” button for more than 1 sec, turn rotary knob to

select pitch, (

±4,10,16,24,100%) press enter to save your new setting.

Key Adjust:Press the “Pitch” button until the orange “Key Adj.” icon is shown above the

pitch % in the display. Button Cycle; Pitch On -> Pitch & Key On -> All Off.

Brake/Echo:Press the “Brake/Echo” button once to active “Brake”, twice to activate

“Echo”, a third to turn all off. Button Cycle; Brake -> Echo -> All Off.

Dump/Reverse:Press the “Dump/Rvs” button once to set “Dump”, twice for “Rvs”, a third to

turn all off. Press the main PLAY/PAUSE to toggle on/off.

Button Cycle; Dump -> Rvs -> All Off.

Product specificaties