DeLock 42022 Handleiding


Bekijk gratis de handleiding van DeLock 42022 (16 pagina’s), behorend tot de categorie Externe harde schijf. Deze gids werd als nuttig beoordeeld door 11 mensen en kreeg gemiddeld 4.7 sterren uit 6 reviews. Heb je een vraag over DeLock 42022 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Pagina 1/16
USB 20 Gbps External Enclosure
for 2 x M.2 NVMe SSD - tool free
Product-No: 42022
User manual no: 42022-a
www.delock.com
User manual
Mode demploi
Uživatelská příručka
Manual de utilizare
Korisnički priručnik
Bedienungsanleitung
Manual del usuario
Instrukcja obsługi
Bruksanvisning
Használati utasítás
Εγχειρίδιο χρήστη
RAID mode table
SW1 1 2
PM OFF OFF
JBOD ON OFF
RAID 0 ON ON
RAID 1 OFF ON
-2-
English
Power supply specication
Wall power supply
Input: AC 100 ~ 240 V / 50 ~ 60 Hz / 0.6 A
Output: 5.0 V / 3.0 A / 15.0 W
System requirements
Android 11.0 or above
Chrome OS
• Linux Kernel 5.15 or above
• Mac OS 13.1 or above
Windows 10/10-64/11
• iPad Air (4th Generation) or above
• iPad Pro (3rd Generation) or above
Surface Pro 7
• Device with a free USB Type-C™ port or with a free
Thunderbolt™ 3 or Thunderbolt™ 4 port
Package content
External enclosure
• Cable USB-C™ male to USB-C™ male, length ca. 45 cm
• Cable USB-C™ male to USB Type-A male, length ca. 45 cm
External power supply
• 2 x thermal conductive pad
• 2 x thermal conductive plate
• 4 x rubber nipple
User manual
Safety instructions
Protect the product against moisture
Avoid anti-static electricity when using the HDD
• Pay attention that the HDD can be hot when it is connected to the
device.
-3-
English
Hardware Installation
1. Open the housing.
2. To do this, press the button on the bottom.
3. Now you plug your M.2 SSD into the slot.
4. Fix the module with the help of the rubber nipple.
5. RAID setting
Note: If you use a new hard drive, please make sure that it is
already formatted.
Use the DIP switch to set the suitable RAID mode.
6. Close the enclosure.
7. Now you can connect the enclosure via the USB interface to
your system.
8. Connect the power supply to the DC female port.
9. Switch on your computer.
10. Press and hold the reset button and short press the on / o󰀨
button.
11. Then the corresponding RAID LED lights up, as well as the
Power LED.
12. After detecting the SSD, the corresponding LED of the SSD will
light up.
13. Then the new drive must be initialized.
Select "MBR" for SSDs smaller than 2 TB and "GPT" for SSDs
larger than 2 TB.
14. A new volume must be created in the Disk Management.
15. The external drive will be recognized and you can start using
the device immediately.


Product specificaties

Merk: DeLock
Categorie: Externe harde schijf
Model: 42022
Kleur van het product: Zwart
Breedte: 68 mm
Diepte: 120 mm
Hoogte: 17 mm
Gebruikershandleiding: Ja
LED-indicatoren: Ja
AC-adapterfrequentie: 50 - 60 Hz
AC-adapter ingangsspanning: 100 - 240 V
Type verpakking: Doos
Aan/uitschakelaar: Ja
USB-connectortype: USB Type-C
Meegeleverde kabels: USB Type-C to USB Type-A, USB Type-C to USB Type-C
Inclusief AC-adapter: Ja
Aantal USB-aansluitingen: 2
USB-versie: 3.2 Gen 2 (3.1 Gen 2)
Materiaal: Metaal
Plug and play: Ja
Ondersteunt Windows: Ja
USB-aansluiting: Ja
Ondersteunt Mac-besturingssysteem: Ja
Externe adapter: Ja
AC-adapter, uitgangsspanning: 5 V
AC-adapter, uitgangsstroom: 3 A
Ondersteunt Linux: Ja
Opslag schijfgrootte: M.2 "
Ondersteunde opslagstationinterfaces: M.2
Overdrachtssnelheid: 20 Gbit/s
Aantal storage drives ondersteund: 2
Type product: SDD-behuizing
S.M.A.R.T. support: Ja
Ingangsstroom AC-adapter: 0.6 A
NVMe: Ja
Geslacht USB-connector: Vrouwelijk
UASP-ondersteuning: Ja
Ondersteunde lengtes van opslagschijven: 30, 42, 60, 80 mm

Heb je hulp nodig?

Als je hulp nodig hebt met DeLock 42022 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden