Definitive Technology SR-8080BP Handleiding


Lees hieronder de đź“– handleiding in het Nederlandse voor Definitive Technology SR-8080BP (12 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 15 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/12
Definitive Technology
SR-8080BP & SR-8040BP OWNER’S MANUAL
SR-8000 Bipolar Surround Speakers:
SR-8080BP, SR-8040BP
Thank you for choosing the Definitive Technology SR-8000 Bipolar Surround Speakers.
These compact, high-quality bipolar speakers are intended primarily for use as a rear or
side speakers. In addition, they can also be used as front “effects” speakers in multi-
channel DSP systems. The lifelike soundfield and flexible placement make this speaker
an excellent addition to any room.
Our engineers have spent many years in developing this product. In order to ensure
that you experience the finest performance possible, we encourage you to take a
moment to fully read this owner’s manual and familiarize yourself with the proper
installation and setup procedures for your SR surround speakers.
SR-8040BP SR-8080BP
www.DefinitiveTech.com
L R C SR SL
Receiver/Amplifier
Speaker Outputs
Definitive Technology
2
SR-8080BP & SR-8040BP
OWNER’S MANUAL
Connecting Your Loudspeakers
Figure 2 – Wiring and Polarity
RECE IV ER/
AMPLI FI ER
Receiver/Amplifier
+
-
Strip 1/4" (6mm) wire. Identify markings on wire and assign +/-.
Ensure that the speaker is always con-
nected to the receiver or amplifier + to +
and – to –.
1. Unscrew binding post and insert wire.
2. Tighten until wire is secure.
1
2
Figure 3 – Connecting Speaker to Amplifier
Positioning Your SR-8000 Surround Speakers
Figure 1 – Rear and Side Surround Placement
VERY IMPORTANT:
Do not use your receiver’s auto setup function!!! The bipolar
nature of this speaker will often confuse the receiver’s auto
setup.
Dolby Digital and DTS multi-channel systems have critical channel balance
and speaker setup procedures which must be followed if the system is to
perform properly. Consult your receiver’s or processor’s manual to learn how
to access your system setup menus. Set speaker setup to “small” and crossover
to 80Hz for the SR-8080BP and 100Hz for the SR-8040BP.
Troubleshooting
If you experience any difficulties with your SR Series loudspeakers, try the
suggestions below. If you still have problems, contact your Definitive
Technology Authorized Dealer for assistance.
1. Audible distortion when the speakers ar playing at loud levels is e
caused by driving (turning up) your receiver or amplifier louder than it or
the speakers are capable of playing. Most receivers and amplifiers put out
their full-rated power well before the volume control is turned all the
way up, so the position of the volume control is a poor indicator of its
power limit. If your speakers distort when you play them loud, turn the
volume down!
2. If you experience a lack of bass, it is likely that one speaker is out of
phase with the other and needs to be rewired paying closer attention to
connect positive to positive and negative to negative on both channels.
Most speaker wire has some indicator (such as color-coding, ribbing or
writing) on one of the two conductors to help you maintain consistency.
It is essential to connect both speakers to the amplifier in the same way
(in phase).
3. Make sure all your system interconnects are solidly in place.
4. Check that no foreign objects or liquid has entered the speaker cabinet.
For use as side surround speakers, position
the speakers approximately 6' (2 m) high
and directly beside or 1-2' (30-60 cm)
behind the listening area.
For use as rear surround speakers, position
the speakers approximately 6' (2 m) high
and 6' (2 m) apart directly behind the lis-
tening area.
Speaker Setup:
Small,
SR-8080BP Crossover at 80Hz
SR-8060BP Crossover at 100Hz
www.DefinitiveTech.com
3
Technical Assistance
It is our pleasure to offer assistance if you have any questions regarding your
Center Channel or its setup, please contact your nearest Definitive Technology
dealer or call us directly at (800) 228-7148 (US & Canada), 01 (410) 363-7148
(all other countries) or e-mail info@definitivetech.com. Technical support is
offered in English only.
Service
Service and warranty work on your Definitive loudspeakers will normally be
performed by your local Definitive Technology dealer. If, however, you wish to
return the speaker to us, please contact us first, describing the problem and
requesting authorization as well as the location of the nearest factory service
center. Please note that the address given in this booklet is the address
of our offices only. Under no circumstances should loudspeakers be
shipped to our offices or returned without contacting us first and
obtaining return authorization.
Definitive Technology Offices
11433 Cronridge Drive, Owings Mills, Maryland 21117
Phone: (800) 228-7148 (US & Canada),
01 (410) 363-7148 (all other countries)
Notes
Performance Specifications
Overall Frequency Response 40 Hz – 30 kHz 50 Hz – 30 kHz
Sensitivity 92 dB 92 dB
Nominal Impedance ohms 8 ohms 8
Recommended Associated Amplifier Power 20 – 200w 20 – 150w
Dimensions
Height 15 5/8" (39.69 cm) 9 1/2" (24.12 cm)
Width 9" (22.76 cm) 7 13/16" (19.8 cm)
Depth 6 1/16" (15.5 cm) 5 3/8" (13.5 cm)
Speaker Complement
Bass/Midrange Driver Quantity 2 2
Bass/Midrange Diameter 4 1/2" (11.43 cm) 3 1/2" (8.89 cm)
Tweeter Quantity 2 2
Tweeter Diameter 1" (2.54 cm) 1" (2.54 cm)
SR-8080BP SR-8040BP


Product specificaties

Merk: Definitive Technology
Categorie: Speaker
Model: SR-8080BP

Heb je hulp nodig?

Als je hulp nodig hebt met Definitive Technology SR-8080BP stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Speaker Definitive Technology

Handleiding Speaker

Nieuwste handleidingen voor Speaker