Definitive Technology CS-8080HD Handleiding

Definitive Technology Speaker CS-8080HD

Lees hieronder de 📖 handleiding in het Nederlandse voor Definitive Technology CS-8080HD (12 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 15 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/12

Definitive Technology

CS-8060HD & CS-8080HD OWNER’S MANUAL

CS-8000HD Series Center Channels:

CS-8060HD, CS-8080HD

Thank you for choosing the Definitive Technology CS Series Center Loudspeaker.

The CS Series is a compact high-definition loudspeaker system designed for use in

audio/video systems of the highest quality. Because of its wide range, high-power

handling and articulate clarity, it is ideal for use as a center channel in a high-

performing home theater system.

Our engineers have spent many years in developing this product. In order to ensure

that you experience the finest performance possible, we encourage you to take a

moment to fully read this owner’s manual and familiarize yourself with the proper

installation and setup procedures for your CS speaker.

CS-8060HD

CS-8080HD

Definitive Technology

CS-8060HD & CS-8080HD

OWNER’S MANUAL

Power Supply

1. The fuse and power disconnect device are located on the back of the speaker.

2. The disconnect device is the power cord, detachable at either the speaker or

the wall.

3. The power cord must be disconnected from the speaker before servicing.

Figure 2 – Wiring and Polarity

Receiver/Amplifier

Strip 1/4" (6mm) wire. Identify markings on wire and assign +/-.

Ensure that the speaker is always connected to

the receiver or amplifier + to + and – to –.

1. Unscrew binding post and insert wire.

2. Tighten until wire is secure.

Unpacking Your Model

Please Inspect For Shipping Damage

Each loudspeaker leaves our plant in perfect condition. Any visible or concealed

damage most likely occurred in handling after it left our plant and should be

reported at once to your Definitive dealer or the delivery company that

delivered your loudspeaker. Please unpack your system carefully. Save all cartons

and packing materials in case you move or need to ship your system. Record the

serial number found on the back of the Center Channel in the Notes section of

this owner's manual.

Safety Precautions

CAUTION! To reduce the risk of electric shock and fire, do not remove the

cover or back plate of this device. There are no user serviceable parts inside.

Please refer all servicing to licensed service technicians. Avis: Risque de choc

electricque, ne pas ouvrir.

CAUTION! The international symbol of a lightning bolt inside a triangle is

intended to alert the user to uninsulated “dangerous voltage” within the

device’s enclosure. The international symbol of an exclamation point inside

a triangle is intended to aler the user to the presence of important operat-t

ing, maintenance and servicing information in the manual accompanying

the device.

CAUTION! To prevent electrical shock, match wide blade of plug to wide

slot, fully insert. Attention: Pour eviter les chocs electriques, introduire la

lame la plus large de la fiche dans la borne correspondante de la prise et

pousser jusqu'au fond.

CAUTION! To reduce the risk of electrical shock, do not expose this equip-

ment to rain or moisture.

1. Read Instructions—All safety and operating instructions should be read

before operating the device.

2. Retain Instructions—The safety and operating instructions should be

retained for future reference.

3. Heed Warnings—All warnings on the device and in the operating

instructions should be adhered to.

4. Follow Instructions—All operating and safety instructions should be

followed.

5. Water & Moisture—The device should never be used in, on or near

water for risk of fatal shock.

6. Carts & Stands—The device should only be used on carts or stands rec-

ommended by the manufacturer.

7. Wall & Ceiling Mounting—The device should be mounted on a wall or

ceiling only as recommended by the manufacturer.

8. Ventilation—The device should always be located in such a way that it

maintains proper ventilation.

It should never be placed in a built-in installation or anywhere that

may impede the flow of air through its heat sink.

9. Heat—Never locate the device near heat sources such as radiators, floor

registers, stoves or other heat-generating devices.

10. Power Supply—The device should only be connected to a power supply

of the type described in the operating instructions or as marked on the

device.

11. Power Cord Protection—Power cables should be routed so they are not

likely to be stepped on or crushed by items placed on them or against

them. Special attention should be paid to areas where the plug enters a

socket or fused strip and where the cord exits the device.

12. Cleaning—The device should be cleaned in accordance with manufac-

turer’s instructions.

13. Periods Of Non-Use—The device should be unplugged when not being

used for extended periods.

14. Dangerous Entry—Care should be taken that no foreign objects or

liquids fall or are spilled inside the device.

15. Damage Requiring Service—The device should be serviced by licensed

technicians when:

• The plug or power supply cord has been damaged.

• Objects have fallen on or liquid has spilled inside the device.

• The device has been exposed to moisture.

• The device does not appear to be operating properly or exhibits a

marked change in performance.

• The device has been dropped or the cabinet becomes damaged.

16. Service—The device should always be serviced by licensed technicians.

Only replacement parts specified by the manufacturer should be used.

The use of unauthorized substitutions may result in fire, shock, or other

hazards.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

Positioning Your Speakers

Your new CS Series speaker is designed to add clarity and focus to the vocal range

and extend the musical image of your home theater. To optimize its performance,

please follow these simple guidelines. Although the following recommendations

will usually yield the best results, whatever sounds best to you is correct.

Figure 1 – Positioning CS Series Center Channel

Connecting Your Speakers

above

below

To receive the full benefit of the bass radiators built into your CS Speaker leave at

least 1–2" (2.5–5 cm) of space between the top of the speaker and any surface.

A center channel

Speaker should

be placed as

close to the

center of your

television as

possible without

obstructing

your view.

1–2"

(2.5–5 cm)

↔

www.DefinitiveTech.com

Technical Assistance

It is our pleasure to offer assistance if you have any questions regarding your

Center Channel or its setup, please contact your nearest Definitive Technology

dealer or call us directly at (800) 228-7148 (US & Canada), 01 (410) 363-7148

(all other countries) or e-mail info@definitivetech.com.

Technical support is

offered in English only.

Service

Service and warranty work on your Definitive loudspeakers will normally be

performed by your local Definitive Technology dealer. If, however, you wish to

return the speaker to us, please contact us first, describing the problem and

requesting authorization as well as the location of the nearest factory service

center. Please note that the address given in this booklet is the address

of our offices only. Under no circumstances should loudspeakers be

shipped to our offices or returned without contacting us first and

obtaining return authorization.

Definitive Technology Offices

11433 Cronridge Drive, Owings Mills, Maryland 21117

Phone: (800) 228-7148 (US & Canada),

01 (410) 363-7148 (all other countries)

Powering the Active Subwoofer

Your CS Speaker contains a built-in, powered woofer designed to extend the

frequency response and dynamic range of the center channel. Do not connect

the Low Level input to your receiver’s LFE output. The CS speakers are not

designed to be a dedicated subwoofer.

Your CS speaker must be plugged into an electrical socket of the appropriate

voltage (as indicated on the back of your unit) using the electrical cord which

you have attached to the back of the speaker. When powering up from being

unplugged, the LED on the amplifier panel will flash for 30 seconds while the

firmware is loading. The CS Speaker has a special circuit which automatically

turns the powered woofer section on when a signal is fed to the loudspeaker and

does not require an on-off switch. The LED on the back panel will light up when

a signal is sensed and the amplifier turns on. After the cessation of a signal, it

may take up to an hour for the amplifier to actually turn off. In some instances,

because of stray radio signals (RF) in your area, the LED may not turn off.

However, this is nothing to be concerned about as the amplifier draws little

power when at idle.

Setting Your Speakers’ Low-Frequency Level

Control

Your CS Speaker has a bass level control which

allows you to tune the output level of the

woofer to match your room and personal

listening preferences. Please note that there

are no controls to vary the crossover points

or phase because these have been

factory-calibrated and set to provide perfect

blending. We suggest beginning with the level

control set at approximately 12 o’clock.

Troubleshooting

If you experience any difficulties with your CS Center Channel loudspeaker, try

the suggestions below. If you still have problems, contact your Definitive

Technology Authorized Dealer for assistance.

1. Audible distortion when the speaker is playing at loud levels is caused

by turning up your receiver or amplifier louder than the receiver or the

speaker is capable of playing. Most receivers and amplifiers put out their

full-rated power well before the volume control is turned all the way up, so

the position of the volume control is a poor indicator of its power limit. If

your speakers distort when you play them loud, turn the volume down!

2. If you experience a lack of bass, it is likely that one speaker is out of phase

(polarity) with the other speakers in the system and needs to be rewired with

closer attention to connecting positive to positive and negative to negative

on both channels. Most speaker wire has some indicator (such as color-

coding, ribbing or writing) on one of the two conductors to help you main-

tain consistency. It is essential to connect both speakers to the amplifier in

the same way (in phase).

3. Make sure all your system interconnects and power cords are solidly in place.

4. Should you hear hum or noise coming from your speakers, try plugging

the speakers’ power cords into a different AC circuit than your amplifier.

5. The system has sophisticated inter cuitrnal protection cir y. If for some

reason the protection circuitry trips, turn off your system and wait five

minutes before trying the system again. If the speakers’ built-in amplifier

should over-heat, the system will turn off until the amplifier cools down

and resets.

6. Check to be sure that your power cord has not been damaged.

7. Check that no foreign objects or liquid has entered the speaker cabinet.

8. If you cannot get the subwoofer driver to turn on or if comes out no sound

and you are sure the system is set up properly, please bring the loudspeaker

to your Definitive Technology Authorized Dealer for assistance; call first.

L R C SL SR SC

Min Max Low

Level

L R C

SL LFE SR

Pre-Out

Speakers-Out

Optional

Receiver/Amplifier

Figure 3 – Connection Option 1 and Connection Option 2

Use the manual speaker setup functions in your receiver to set speaker

configuration, speaker distance and channel balance. Consult your receiver’s or

processor’s manual to learn how to access and use the setup menus. Set center

speaker as “Large.”

Speaker Setup:

Large

Min Max

VERY IMPORTANT:

Do not use your receiver’s auto set-up functions as they are

often ineffective in setting up and adjusting speakers with built-

in powered subwoofers!

All Dolby/DTS multi-channel receiver/amplifiers feature a dedicated channel for a center

speaker. Consult your receiver's owner's manual for the appropriate connection procedure.

Product specificaties

Merk:	Definitive Technology
Categorie:	Speaker
Model:	CS-8080HD

Heb je hulp nodig?

Als je hulp nodig hebt met Definitive Technology CS-8080HD stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Speaker Definitive Technology

Definitive Technology Mythos ST Handleiding

19 Maart 2024

Definitive Technology ProCinema 1000 Handleiding

6 Juli 2023

Definitive Technology BPVX Handleiding

5 Juli 2023

Definitive Technology DT6.5R Handleiding

1 Juli 2023

Definitive Technology Demand D17 Handleiding

26 Juni 2023

Definitive Technology ProCinema 400 Handleiding

22 Juni 2023

Definitive Technology C/L/R 3000 Handleiding

21 Juni 2023

Definitive Technology Mythos ST-L SuperTower Handleiding

21 Juni 2023

Definitive Technology Disappearing DI 6.5S Handleiding

21 Juni 2023

Definitive Technology ProCinema 1200 Handleiding

21 Juni 2023

Handleiding Speaker

Nieuwste handleidingen voor Speaker

OTTO Bluetooth Revo NC2 Handleiding

20 April 2024

REL Acoustics Strata Handleiding

20 April 2024

REL Acoustics Strata III Handleiding

20 April 2024

Soen Transit Handleiding

18 April 2024

Miller & Kreisel MP300RC Handleiding

18 April 2024

Soen Transit XS Handleiding

18 April 2024

Miller & Kreisel MP7 Handleiding

18 April 2024

Qian QRBT1801 Handleiding

17 April 2024

Focal Twin6 Handleiding

17 April 2024

Kenwood KFC-WPS1000F Handleiding

16 April 2024