DB Technologies VIO X310 Handleiding


Bekijk gratis de handleiding van DB Technologies VIO X310 (85 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 3 mensen en kreeg gemiddeld 4.5 sterren uit 2 reviews. Heb je een vraag over DB Technologies VIO X310 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Pagina 1/85
MANUALE D’USO – Sezione 1
Le avvertenze nel presente manuale devono essere osservate congiuntamente al “MANUALE D’USO - Sezione 2”.
USER MANUAL - Section 1
The warnings in this manual must be observed in conjunction with the “USER MANUAL - Section 2”.
BEDIENUNGSANLEITUNG – Abschnitt 1
Die Hinweise in der vorliegenden Bedienungsanleitung sind ebenso zu befolgen wie die in der „BEDIENUNGSANLEITUNG – Abschnitt 2“.
MANUEL D’UTILISATION – Section 1
Respecter à la fois les avertissements donnés dans ce document et dans le MANUEL D’UTILISATION - Section 2.
MANUAL DE USO – Sección 1
Respete las advertencias de este manual y los contenidos del “MANUAL DE USO - Sección 2”.
Professional Active 3-Way Loudspeaker
II
VIO X310
Cod. 420120424 REV. 1.2
EMI CLASSIFICATION
According to the standards EN 55032 and 55035 this is a class A equipment, designed and suitable to operate in
residential environments.
FCC CLASS A STATEMENT ACCORDING TO TITLE 47, PART 15, SUBPART B, §15.105
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful interference to radio communi-
cations. Operation of this equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
WARNING: Make sure that the loudspeaker is securely installed in a stable position to avoid any injuries or dam-
ages to persons or properties. For safety reasons do not place one loudspeaker on top of another without proper
fastening systems. Before hanging the loudspeaker check all the components for damages, deformations, missing
or damaged parts that may compromise safety during installation. If you use the loudspeakers outdoor avoid spots
exposed to bad weather conditions. Contact dB Technologies for accessories to be used with speakers. dBTech-
nologies will not accept any responsibility for damages caused by inappropriate accessories or additional devices.
Features, specication and appearance of products are subject to change without notice. dBTechnologies reserves the right to
make changes or improvements in design or manufacturing without assuming any obligation to change or improve products
previously manufactured.
WARNING
Only expert personnel may use the product and its accessories! To prevent hazards to people, animals and/or objects, make sure that
the installation is stable and secure. Comply with the safety regulations and laws in force in the country in which you use the product.
For safe use, periodically check that all parts are in good working condition before use. Only authorised personnel may carry out de-
sign, calculations, installation, testing and maintenance of professional own or stacked audio systems. AEB Industriale shall not
be liable for improper installation carried out without adequate safety measures. Never suspend the speakers from the handles!
Only use the accessories and congurations described in this manual, and proceed in accordance with the instructions given in the
manuals for the accessories. Do not obstruct the amplier cooling ns at the back. In the event of overheating, the audio volume is gra-
dually reduced until the module is thermally stable. The level is automatically restored on reaching the correct operating temperature.
Do not attempt to open the amplier. In the event of malfunction, immediately turn off the power, disconnect the unit from the mains and
contact an authorised service centre. Only use the power cable provided. The USB SERVICE DATA connection is to be used exclusively for upda-
ting the product’s rmware; do not connect any other USB device to the unit to avoid the risk of damage and malfunction. Do not use the
monitor for a prolonged period with the limiter LED steadily lit or ashing as this indicates operation under stress with excessive distortion.
The system shall be powered down after use. Damage to the system can be caused by leaving the system powered on for extended periods of
time while not passing audio. Any damage to the system caused by the system being powered on for extended periods of time while not in
use will not be covered by warranty.
Check periodically the integrity and the functionality of the accessories and the technical equipments for a safe installation. user should never
apply a load that exceeds the working load limits of any rigging components or equipment here presented. design, calculation, installation,
testing and maintanance of suspension and stack systems for audio equipment must be performed only by qualied and authorized personnel.
AEB Industriale s.r.l. denies any and all responsibility for improper installations, in the absence of safety requirements.


Product specificaties

Merk: DB Technologies
Categorie: Niet gecategoriseerd
Model: VIO X310

Heb je hulp nodig?

Als je hulp nodig hebt met DB Technologies VIO X310 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden