Davis DAV-7720 Handleiding

Bekijk gratis de handleiding van Davis DAV-7720 (28 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 20 mensen en kreeg gemiddeld 5.0 sterren uit 2 reviews. Heb je een vraag over Davis DAV-7720 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

1

Rain Collector Heater

Installation Manual

The Rain Collector Heater may be

used to protect the Rain Collector’s

internal components from freezing

and/or to measure the moisture

content of snowfall. When the

heater is on, it is capable of

melting snow at a rate of 1/4''

(6 mm) of liquid precipitation per

hour. It may not be able to keep up

with larger rates of snowfall.

The rain collector heater warms

only the inside of the rain collector

and the cone itself.

Please note that we have made every attempt to design and manufacture a

safe product, but Davis Instruments assumes no liability for any injury or

damage caused directly or indirectly by the installation or use of this

product.

Note: Although the nominal heater voltage is not hazardous, a short in the wall

transformer could cause hazardous voltage to appear on the heater

wires. For safety, you should always turn the heater’s power unit to the

“OFF” position before removing the rain collector’s cone. We also

recommend that you unplug the wall transformer before removing the

rain collector’s cone.

This instruction manual is designed to take you step-by-step through the

process required to install and use your rain collector heater. Please take the

time to read through this manual before beginning the process.

Note: This heater is not compatible with AeroCone rain collectors. You will need

to replace the AeroCone on your sensor suite, if you have one, with a

classic cone.

Product specificaties