Davis 0821 Handleiding

Davis Horloge 0821

Lees hieronder de 📖 handleiding in het Nederlandse voor Davis 0821 (4 pagina's) in de categorie Horloge. Deze handleiding was nuttig voor 58 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
208050 en ma 2012.07
*208.050 MANUALCAN-OPENER -
No. REF. DESCRIPTION
réf.
1 02870 RILSAN LEVER
2 02830 BLADE
3 02873 COURBANE RING
4 OX873 ST/ST RING
5 02877 BLADE SCREW
6 02872 NICKELED STEEL PLAQUETTE
7 02820 COG-WHEEL
8 02810 BODY ALONE 02
9 SQUARE 02
10 02888 SCREW 6X10 FOR 02
02840 HANDLE FOR CAN OPENER 02
OX842 HANDLE + CLIP FOR 02
02880 BED PLATE TO BE BOLTED EPOXY 02
02890 CLAMP BASE EPOXY 02
ASSEMBLING OF THE CAN-OPEN;
Fixe the standby bolting to the table with 4 screws.
Fixe the stand with a clamp xation. Tighten very hard so that the base can’t move when you open
a can.
Fixe the stand with wall! fi xation hang on the wall (about 70/80 cm height).
Put the can-opener in the place allowed in the base, the blade facing the base.
UTILISATION
Disengage the knurled wheel in displacing the
rilsan lever to the left.
Lift the can-opener and place the can against the
pillar.
Let the tool drop and push down so that the blade
pierces the can lid
208050 en ma 2012.07
Tighten the knurled wheel with the rilsan lever
(in a clockwise direction).
Turn the crank (in a clockwise direction).
Back the rilsan lever
(in an anti-clockwise direction) and lift.
MAINTENANCE
CLEANING
Daily cleaning with a wet sponge, or in dish-washing machine.
Brush the cog-wheel regularly (a dirty cog-wheel can’t drive the can).
BLADE
CAUTION: DO NOT SHARPEN THE BLADE
When the blade leaves metal silver, it is chipped or worn and you must return the blade or change it.
You must loosen the screw, take out the rings and return the worn blade. Replace the rings and screw
back the blade.
COG-WHEEL
To dismantle the wheel, insert it in seating and turn the handle in opposite clockwise direction. As the
can-opener is dismantled, we advise you to clean the different parts of the can-opener (blade, cog-
wheel, base). Put the new cog-wheel in seating with the engraved arrow on the top.
BAGUE EN RILSAN -RILSAN LEVER
To reach the rilsan lever, it is necessary to dismantle the cog-wheel (see above) and to withdraw the
handle.
GUARANTEE
The guarantee does not cover the-repairs due to:
Use not forecasted or abusive of the machine / deterioration due to a shock or a fall / assembling
or dismantling not forecasted in the user's instructions.
The guarantee does not cover the wearing parts (blade and cog-wheel) and applies within the
framework of a normal use and maintenance.
208050 fr ma 2012.07
*208.050 L’OUVRE-BOÎTES - NOTICE D’UTILISATION
No. REF.
DÉSIGNATION
1 02870
BAGUE EN RILSAN
2 02830
LAME
3 02873
RONDELLE COURBANE
4 OX873
RONDELLE ACIER INOX
5 02877
VIS DE LAME
6 02872
PLAQUETTE
7 02820
MOLETTE
8 02810
CORPS 02
9
CARRE
10 02888
VIS 6X10 POUR OUVRE BOITES MANUEL 02
02840
MANIVELLE POUR 02
OX842
POIGNEE CLIP POUR 02
02880
SOCLE PLAQUE A VISSER EPOXY 02
02890
SOCLE SERRE-JOINT EPOXY 02
MONTAGE DE L’OUVRE-BOITES;
Fixer !e socle à visser sur le bord d’une table à l‘aide des 4 vis jointes.
Fixer le socle serre-joint sur le bord d’une table en serrant très fermement afi n que le socle ne bouge
pas.
Fixer le socle mural en positionnant le support mural à environ . 70/80 cm de hauteur.
Disposer l’ouvre-boîtes dans l’emplacement prévu dans le socle, la lame côté socle.
UTILISATION
Dégager la molette en déplaçant la bague en rilsan
vers la droite (sens contraire aux aiguilles d’une
montre).
Soulever l’ouvre-boîtes et placer la boîte à ouvrir le
long de la tige, sur le socle.
Redescendre l’ouvre-boîtes en enfonçant la lame
dans la boîte.


Product specificaties

Merk: Davis
Categorie: Horloge
Model: 0821

Heb je hulp nodig?

Als je hulp nodig hebt met Davis 0821 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Horloge Davis

Handleiding Horloge

Nieuwste handleidingen voor Horloge