Danby DAC250BGUWDB Handleiding

Danby Airco DAC250BGUWDB

Lees hieronder de 📖 handleiding in het Nederlandse voor Danby DAC250BGUWDB (52 pagina's) in de categorie Airco. Deze handleiding was nuttig voor 60 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/52
DANBY PRODUCTS LIMITED, ONTARIO, CANADA N1H 6Z9
DANBY PRODUCTS INC., FINDLAY, OHIO, USA 45840
OWNER’S MANUAL
MANUEL DU PROPRIÉTAIRE
MANUAL DEL PROPIETARIO
AIR CONDITIONER
Owner’s Manual.............................1 - 16
CLIMATISEUR
Manual du propriĂŠtaire.................17 - 32
AIRE ACONDICIONADO
Manual del propietario..................33 - 48
2017.09.28
MODEL MODÈLE MODELO• •
DAC150BGUWDB
DAC180BGUWDB
DAC250BGUWDB
Welcome
Welcome to the Danby family. We are proud of our quality products and we believe in
dependable service. We suggest that you read this owner’s manual before plugging in your new
appliance as it contains important operation information, safety information, troubleshooting and
maintenance tips to ensure the reliability and longevity of your appliance.
Visit www.Danby.com to access self service tools, FAQs and much more. For additional assistance
call .1-800-263-2629
Note the information below; you will need this information to obtain service under warranty.
You must provide the original purchase receipt to validate your warranty and receive service.
Model Number: _________________________________________________
Serial Number: _________________________________________________
Date of Purchase: _______________________________________________
Need Help?
Before you call for service, here are a few things you can do to help us serve you better.
Read this owner’s manual:
It contains instructions to help you use and maintain your appliance properly.
If you receive a damaged appliance:
Immediately contact the retailer or builder that sold you the appliance.
Save time and money:
Check the troubleshooting section at the end of this manual before calling. This section
will help you solve common problems that may occur.
1-800-26- Danby
(1-800-263-2629)
1
Important Safety Information
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
ELECTRICAL REQUIREMENTS
All wiring must comply with local and national
codes and must be installed by a quali ed
electrician. Check the available power supply and
resolve any wiring problems before installing and
operating this appliance.
The rating plate located on the right side of the
appliance just above the power cord contains
electrical and other technical data.
This appliance is not designed for “through the
wall” installation.
GROUNDING INSTRUCTIONS
This appliance must be grounded. Grounding
reduces the risk of electrical shock by providing an
escape wire for the electrical current.
This appliance has a cord that has a grounding
wire with a 3-prong plug. The power cord must be
plugged into an outlet that is properly grounded.
If the outlet is a 2-prong wall outlet, it must be
replaced with a properly grounded 3-prong wall
outlet.
WARNING - Improper use of the grounding
plug can result in a risk of electric shock.
Consult a quali ed electrician or service agent
if the grounding instructions are not completely
understood, or if doubt exists as to whether the
appliance is properly grounded.
Do not connect your appliance to extension cords
or together with another appliance in the same
wall outlet.
Do not splice the power cord. Do not under any
circumstances cut or remove the third ground prong
from the power cord. Do not use extension cords or
ungrounded (two prongs) adapters.
If the power supply cord is damaged, it must be
replaced by the manufacturer, its service agent or
similar quali ed person in order to avoid hazard.
2
SAVE THESE INSTRUCTIONS!
POWER SUPPLY CORD
The power cord contains a device that senses
damage to the power cord. To test if the power cord
is working properly:
1. Connect the power supply cord to an electrical
outlet.
2. The power supply cord has two buttons located
on the head of the plug. One button is marked
“Test” and the other is marked “Reset”. Press the
“Test” button and the “Reset” button will pop out
and click.
3. Press the “Reset” button and a click will sound as
the button engages.
4. The power supply cord is now energized and
supplying electricity to the appliance.
Notes:
• If the appliance looses power, the reset button
may need to be reengaged when the power
resumes.
• This button should not be used to turn the
appliance on and off.
• The “Reset” button must always be pushed in for
correct operation.
• The power supply cord must be replaced if it
fails to reset when the “Test” button is pushed in.
POWER RECEPTACLES
These appliances require higher voltage receptacles
than standard household receptacles. Consult the
table below to  nd the required receptacle for your
model number.
Model Number Voltage Receptacle
DAC150BGUWDB 125
DAC180BGUWDB 240
DAC250BGUWDB 240


Product specificaties

Merk: Danby
Categorie: Airco
Model: DAC250BGUWDB

Heb je hulp nodig?

Als je hulp nodig hebt met Danby DAC250BGUWDB stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Airco Danby

Handleiding Airco

Nieuwste handleidingen voor Airco