Daikin SDGTB06 Handleiding

Bekijk gratis de handleiding van Daikin SDGTB06 (4 pagina’s), behorend tot de categorie Ketel & boiler. Deze gids werd als nuttig beoordeeld door 22 mensen en kreeg gemiddeld 4.9 sterren uit 8 reviews. Heb je een vraag over Daikin SDGTB06 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

WARNINGCAUTION

Read through this Installation Manual before installing.

WARNING

Installer must apply for standard installation guidance.

• Please perform the installation work, select insulation, and perform heat insulation construction in accordance with

the laws and regulations of each country.

• For specifications of connection piping, refer to Table 1 below.

• Piping is limited to newly installed piping.

Even with newly installed piping, remove places to which brazing material is adhered, or which have been burnt the burner.by

• Please keep minimum wall thickness of the pipe for installation.

• Do not disassemble the GAS TIGHT JOINT.

• When rk working in high places, womust be performed with a stable scaffold.

• Carry out the work of connecting the GAS TIGHT JOINT one location at a timemaking sure each location is secure.,

(Do not perform simultaneous work on 2 or more locations between the same outdoor and indoor unit)

• Do not use the GAS TIGHT JOINT which has been dropped.

•

The GAS TIGHT JOINT cannot be re-used if it has already been inserted into the piping, temporarily fixed, and removed.

•

Do not turn the nut in the loosening direction.

INSTALLATION MANUAL

SDGTB06

·

09

·

12

·

15

·

19

·

22

·

28

SDGTB0906

·

1209

·

1512

·

1915

·

2219

·

2522

·

2825

·

3428

BDGTA34

·

41, SDGTLB22

·

28

3V022006-1A

GAS TIGHT JOINT

The case which may cause

dangerous situation such as

death or severe injury, at the

same time, it may cause

property damage when

mis-operated.

The case which may cause

dangerous situation such as

injury or minor injury, at the

same time, it may cause

property damage when

mis-operated.

R410A, R32 UNIT ONLY

Removing the thermal insulation

material (copper pipe)

1

1) Be careful not to damage the pipe.

2) If using insulated copper pipe, cut in a

cylindrical direction, not in a lengthwise

direction.

(Cylindrical direction)

(Lengthwise direction)

R32: Type BDGTA34/41 are not applicable in the EU

Table 1 : Specication of connection piping

Standard

ASTM B280ASTM B88 (Type L)EN12735

Model name

Size (O.D.)O60H58Thickness (mm)

O60

O50

H58R220R250R290Thickness (mm)Thickness (mm)

Same diameterDifferent diameter

SDGTB06

SDGTB0906

–

φ6.35



–

0.762±0.08

–––



––

0.80±0.08

1.00±0.13

SDGTB09

SDGTB1209

φ9.52



–

0.813±0.08



–

0.762±0.08



–

0.80±0.08



––

1.00±0.13

SDGTB12

SDGTB1512

φ12.7



–

0.813±0.08



–

0.889±0.11



––

0.80±0.08

–



–

0.91±0.09



–

1.00±0.13

SDGTB15

SDGTB1915

φ15.88



–

0.889±0.11



–

1.016±0.11

–



–

0.91±0.09



–

1.00±0.13

SDGTB19

SDGTB2219

φ19.05

–



1.07±0.10

–



1.07±0.11



–

1.00±0.13

–



–

1.25±0.19

SDGTB22

SDGTLB22SDGTB2522

φ22.22

–



1.14±0.10

–



1.14±0.11



––

1.00±0.13

–



–

1.25±0.19

1.63±0.25

–

SDGTB2825

φ25.4 *2

–––––––



–

1.00±0.13

SDGTB28

SDGTLB28

SDGTB3428

φ28.58

–



1.27±0.10

–



1.27±0.13

–



1.00±0.13

1.25±0.19

–



–

1.63±0.25

BDGTA34

–

φ34.92

–



1.40±0.15

–



1.40±0.15

–



1.25±0.19

–



–

1.63±0.25

BDGTA41

––

φ41.28

–



1.52±0.15

–



1.52±0.15

–



1.25±0.19

––



1.63±0.25

Notes) 1. “–” : No settings

2. *2 : For connection to the stop valve outlet pipe only.

Product specificaties