Daikin FWT02HATVMV1 Handleiding

Daikin Airco FWT02HATVMV1

Bekijk gratis de handleiding van Daikin FWT02HATVMV1 (17 pagina’s), behorend tot de categorie Airco. Deze gids werd als nuttig beoordeeld door 3 mensen en kreeg gemiddeld 4.3 sterren uit 2 reviews. Heb je een vraag over Daikin FWT02HATVMV1 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Download PDF

Pagina 1/17

MODELS

FWT02HATVMV1

FWT03HATVMV1

FWT04HATVMV1

FWT05HATVMV1

FWT06HATVMV1

English

Installation Manual

Chilled Water Fan Coil Units

3P772618-1

DAIKIN ROOM AIR CONDITIONER

INSTALLATION MANUAL

CHILLED WATER

FAN COIL UNIT

Read the precautions in this manual carefully before operating the unit.

• The precautions described herein are classified as WARNING and CAUTION.

They both contain important information regarding safety. Be sure to observe all precautions without fail.

• Meaning of WARNING and CAUTION notices.

WARNING

Failure to follow these instructions properly may result in personal injury or loss of life.

CAUTION

Failure to observe these instructions properly may result in property damage or personal injury,

which may be serious depending on the circumstances.

• The safety marks shown in this manual have the following meanings:

Be sure to follow the instructions. Be sure to establish a ground connection. Never attempt.

• After completing installation, conduct a trial operation to check for faults and explain to the customer how to operate

the air conditioner and take care of it with the aid of operation manual.

WARNING

• Ask your dealer or qualiﬁ ed person to carry out installation work.

Do not attempt to install the air conditioner yourself. Improper installation may result in water leakage, electric shocks or ﬁ re.

• Small children or immobile persons (due to illness or injury) should not operate the unit by themselves.





For EU, UK, Turkey:

This appliance can be used by children aged from 8 years and above and person with reduced physical, sensory or mental capabilities or lack of

experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the

hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.



For other regions:

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience

and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

-Children should be supervised to ensure that they do not play with the appliance.

-Persons who are heavily intoxicated or have taken sleep medication should not operate the unit.(An electric shock, injury or poor health may

result.)

• This appliance is intended to be used by expert or trained users in shops,in light industry and on farms, or commercial use by lay persons.

• Install the air conditioner according to the instructions given in this manual.

Incomplete installation may cause water leakage, electrical shock, or ﬁ re.

• Be sure to use only the speciﬁ ed accessories and parts for installation work.

Failure to use the speciﬁ ed parts may result in the unit falling, water leakage, electric shocks or ﬁ re.

• Install the air conditioner on a foundation strong enough to withstand the weight of the unit.

A foundation of insufﬁ cient strength may result in the equipment falling and causing injury.

• Electrical work must be performed in accordance with relevant local and national regulations and with instructions in this installation manual.

Be sure to use a dedicated power supply circuit only. Insufﬁ ciency of power circuit capacity and improper workmanship may result in electric shocks or ﬁ re.

• Be sure to use a dedicated power circuit. Never use a power supply shared by another appliance.

• Use a cable of suitable length.

Do not use tapped wires or an extension lead, as this may cause overheating, electric shocks or ﬁ re.

• Make sure that all wiring is secured, the speciﬁ ed wires are used, and that there is no strain on the terminal connections or wires.

Improper connections or securing of wires may result in abnormal heat build-up or ﬁ re.

• When wiring the power supply, position the wires so that the control box lid can be securely fastened.

Improper positioning of the control box lid may result in electric shocks, ﬁ re or overheating terminals.

• After connecting interconnecting and supply wiring, be sure to shape the cables so that they do not put undue force on the electrical covers

or panels. Install covers over the wires.

Incomplete cover installation may cause terminal overheating, electrical shocks, or ﬁ re.

• When installing or relocating the air conditioner, be sure to bleed the refrigerant circuit to ensure it is free of air, and use only water.

The presence of air or other foreign matter in the refrigerant circuit cause abnormal pressure rise, which may result equipment damage and even injury.

• The installation height from the ﬂ oor must be over 2.3m.

• Be sure to earth the air conditioner.

Do not earth the unit to a utility pipe, lightning conductor or telephone earth lead. Imperfect earthing may result in electric shocks.

• Be sure to install an earth leakage breaker. Failure to install an earth leakage breaker may result in electrical shocks, or ﬁ re.

• All electrical wiring must not touch the water piping or any moving parts of the fan motors.

• Confirm that the unit has been switched OFF before installing or servicing the unit.

• Disconnect from the main power supply before servicing the air conditioner unit.

• DO NOT pull out the power cord when the power is ON.

This may cause serious electrical shocks which may result in fire hazards.

• Keep the indoor units, power cable and transmission wiring, at least 1m from TVs and radios, to prevent distorted pictures and static.

Depending on the type and source of the electrical waves, static may be heard even when more than 1m away.

ENGLISH

INSTALLATION MANUAL

SAFETY PRECAUTIONS

ENGLISH

NOTICE

Disposal requirement

Your air conditioning product is marked with this symbol. This means that electrical and electronic products shall not be mixed with unsorted household waste.

Do not try to dismantle the system yourself: the dismantling of the air conditioning system, treatment of the refrigerant, of oil and of other parts must be

done by a qualified installer in accordance with relevant local and national legislation. Air conditioners must be treated at a specialized treatment facility

for re-use, recycling and recovery. By ensuring this product is disposed of correctly, you will help to prevent potential negative consequences for the

environment and human health. Please contact the installer or local authority for more information. Batteries must be removed from the remote controller

and disposed of separately in accordance with relevant local and national legislation.

CHOOSING AN INSTALLATION SITE

• Before choosing the installation site, obtain user approval.

Indoor Unit

The indoor unit should be sited in a place where:

• The restrictions on installation specified in the indoor unit installation drawing are met.

• Both air intake and exhaust have clear paths met.

• The unit is not in the path of direct sunlight.

• The unit is away from the sources of heat or steam.

• There is no source of machine oil vapour (this may shorten indoor unit life).

• Cool air is circulated throughout the room.

• The unit is away from electronic ignition type fluorescent lamps (inverter or rapid start type). As these may shorten the

remote controller range.

• The unit is at least 1 metre away from any television or radio set (unit may cause interference with the picture or sound).

• Install at the recommended height (more than 2.3m).

• Do not install the units at or near doorway.

• Do not operate any heating apparatus too close to the air conditioner unit or use in room where mineral oil, oil vapour or

oil steam exist, this may cause plastic part to melt or deform as a result of excessive heat or chemical reaction.

• When the unit is used in kitchen, keep flour away from going into suction of the unit.

• This unit is not suitable for factory used where cutting oil, mist or iron powder exist or voltage fluctuates greatly.

• Do not install the units at area like hot spring or oil refinery plant where sulphide gas exists.

• IMPORTANT : DO NOT INSTALL OR USE THE AIR CONDITIONER UNIT IN A LAUNDRY ROOM.

Do not use joined and twisted wires for incoming power supply. The equipment is not intended for use in a potentially

explosive atmosphere

Wireless Remote Controller

• Do not expose the remote controller to direct sunlight (this will hinder receiving signals from the indoor unit).

• Turn on all the fluorescent lamps in the room, if any, and find the site where remote controller signals are properly

received by the indoor unit (within 7 metres).

Mounting plate

Installation manual

PM2.5 filter

O-ring

ACCESSORIES

CAUTION

• Do not install the air conditioner at any place where there is danger of flammable gas leakage.

In the event of a gas leakage, build-up of gas near the air conditioner may cause a fire to break out.

• While following the instructions in this installation manual, install drain piping to ensure proper drainage and insulate piping to prevent condensation.

Improper drain piping may result in indoor water leakage and property damage.

• Ensure that the unit’s panel is closed after service or installation.

Unsecured panels will cause the unit to operate noisily.

• Sharp edges and coil surfaces are potential locations which may cause injury hazards.

Avoid from being in contact with these places.

• Before turning off the power supply set the remote controller’s ON/OFF switch to the “OFF” position to prevent the nuisance tripping of the unit.

If this is not done, the unit’s fans will start turning automatically when power resumes, posing a hazard to service personnel or the user.

• Make sure to provide for adequate measure in order prevent that the outdoor unit be used as a shelter by small animals. Small animal making contact

with electrical parts can cause malfunctions, smoke or fire.

Please instruct the customer to keep the area around the unit clean.

• The temperature of refrigerant circuit will be high, please keep the inter-unit wiring away from copper pipes that are not thermally insulated.