Dahua Technology ITALE-060AA-P Handleiding
Pagina's 18 Niet gecategoriseerd
Bekijk de handleiding van Dahua Technology ITALE-060AA-P gratis online of download de PDF. Deze handleiding is 0 keer bekeken. Vraag over dit model? Stel een vraag
ITALE-060AA-P LED Light User's Manual
Version 1.0.2
Important Safeguards and Warnings
Please read the following safeguards and warnings carefully before using the product in
order to avoid damages and losses.
Requirements of Power
Please strictly abide by all local electrical safety standards.
Please check if power supply is correct before the device is running.
Use power supply which meet SELV (Safety Extra Low Voltage) requirements, and in
accordance with IEC60950-1 use rated voltage meet Limited Power Source, the specific
power requirements subject to the Devices tab.
Please install easy-to-use power isolation device during wiring, so it can be used to cut off
power for emergency.
The power supply must be used with lightening arrester to enhance the effects of protection.
Protect the power cord from being walked on or pinched particularly at plugs, outlets and the
port where they exit from the device.
Environment of Operation
Please transport, use, and store devices within the allowed range of temperature and humidity.
Do not press, shake or soak device.
Please pack the device with materials used when it is shipped out from factory or equivalent
materials.
Lightening arrester is mandatory to improve the lightning protection effect.
The device must have its GND end (earth or grounding hole) grounded, to improve device
reliability, otherwise its lightening arrester will not be valid.
Installation side must have waterproof measure, to prevent water from flowing into the device
and cause damage.
Operation and Maintenance
Do not dismantle the device.
During test, do not consecutively flash in order to avoid overheating and damage.
If it is working improperly, we should cut off the power, find out the cause or troubleshooting and
then put into use.
Do not replace the special screws, if screws are too long, it will damage internal components.
There is high pressure inside, so do not disassemble the device.
When moving or install device, do not remove the power line at waterproof joint, to prevent
loose of the joint.
Please use accessories or attachments specified by the manufacturer, and let professional
personnel to perform installation and maintenance service.
Do not supply two or more powers to one device because this may result in damage to the
device.
Special Announcement
This manual is for reference only.
All the designs and software here are subject to change without prior written notice.
If there is any uncertainty or controversy, please refer to the final explanation of us.
Product specificaties
| Merk: | Dahua Technology |
| Categorie: | Niet gecategoriseerd |
| Model: | ITALE-060AA-P |
Heb je hulp nodig?
Als je hulp nodig hebt met Dahua Technology ITALE-060AA-P stel dan hieronder een vraag en andere gebruikers zullen je antwoorden