Dahua Technology HAC-HUM3200A Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Dahua Technology HAC-HUM3200A (28 pagina's) in de categorie Bewakingscamera. Deze handleiding was nuttig voor 18 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/28
HDCVI Camera
Users Manual
V1.0.
2
I
Foreword
General
This manual introduces the functions and operations of the HDCVI camera (hereinafter referred to as
"the device"). Read carefully before using the device, and keep the manual safe for future reference.
Safety Instructions
The following categorized signal words with defined meaning might appear in the manual.
Signal Words Meaning
DANGER
Indicates a high potential hazard which, if not avoided, will result in
death or serious injury.
WARNING
Indicates a medium or low potential hazard which, if not avoided,
could result in slight or moderate injury.
CAUTION
Indicates a potential risk which, if not avoided, could result in
property damage, data loss, reductions in performance, or
unpredictable results.
TIPS Provides methods to help you solve a problem or save time.
NOTE Provides additional information as a supplement to the text.
Revision History
Version Revision Content Release Time
V1.0.2
Added "5 Smart Dual Illuminators Cameras
Configuration".
Added "7 .4 Configuring Smart Dual
Illuminators Active Deterrence Camera".
August 2022
V1.0.1 Adjusted the format of tables.
Added Cybersecurity Recommendations.
August 2021
V1.0.0 rFirst elease. June 2020
Privacy Protection Notice
As the device user or data controller, you might collect the personal data of others such as their face,
fingerprints, and license plate number. You need to be in compliance with your local privacy
protection laws and regulations to protect the legitimate rights and interests of other people by
implementing measures which include but are not limited: Providing clear and visible identification
to inform people of the existence of the surveillance area and provide required contact information.
III
Important Safeguards and Warnings
Electrical Safety
All installation and operation should conform to your local electrical safety codes.
The power supply must conform to the requirements of ES1 in IEC 62368-1 standard and be no
higher than PS2. Note that the power supply requirements are subject to the device label.
A readily accessible disconnect device shall be incorporated in the building installation wiring.
Make sure that the power adapter meets the operating voltage requirement before device
powering up the device (The material and length of the power cable might influence the device
voltage).
Prevent the power cable from being trampled or pressed, especially the plug, power socket and
the junction extruded from the device.
We assume no liability or responsibility for all the fires or electrical shock caused by improper
handling or installation.
Operating Requirements
Do not aim the device at strong light to focus, such as lamp light and sun light.
Transport, use and store the device within the range of allowed humidity and temperature.
Keep the device away from water or other liquid to avoid damages to the internal components.
Keep sound ventilation to avoid heat accumulation.
Heavy stress, violent vibration or water splash are not allowed during transportation, storage
and installation.
Pack the device with standard factory packaging or the equivalent material when transporting
the device.
You are recommended to use the device together with lightning arrester to improve lightning
protection effect.
You are recommended to ground the device to enhance reliability.
You are recommended to use qualified video transmission cable to improve video quality, and
use RG59 coaxial cable or higher standard.
WARNING
Use standard components or accessories provided by the manufacturer and make sure that the
device is installed and maintained by professional engineers.
The surface of the image sensor should not be exposed to laser beam radiation in an
environment where a laser beam device is used.
Do not provide two or more power supply sources for the device; otherwise it might damage
the device.
If PoC power supply is used, do not connect any other device between the device and PoC
transceiver including UTC, Balun, optical transceiver, distributor and convertor and so on;
otherwise, the device might get burned.
PoC supply voltage is up to 52V. Do not dismantle the device during normal operation;
otherwise it might cause danger to both device and users due to high voltage.


Product specificaties

Merk: Dahua Technology
Categorie: Bewakingscamera
Model: HAC-HUM3200A

Heb je hulp nodig?

Als je hulp nodig hebt met Dahua Technology HAC-HUM3200A stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Bewakingscamera Dahua Technology

Handleiding Bewakingscamera

Nieuwste handleidingen voor Bewakingscamera