Dahua Technology ARM7011-W2 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Dahua Technology ARM7011-W2 (17 pagina's) in de categorie Alarmsysteem. Deze handleiding was nuttig voor 24 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/17
Wireless Relay
User’s Manual
ZHEJIANG DAHUA VISION TECHNOLOGY CO., LTD. V1.0.0
User’s Manual
I
Foreword
General
This manual introduces the installation, functions and operations of the Wireless Relay (hereinafter
referred to as the "relay"). Read carefully before using the device, and keep the manual safe for future
reference.
Safety Instructions
The following signal words might appear in the manual.
Signal Words
Meaning
DANGER
Indicates a high potential hazard which, if not avoided, will result in
death or serious injury.
WARNING
Indicates a medium or low potential hazard which, if not avoided,
could result in slight or moderate injury.
CAUTION
Indicates a potential risk which, if not avoided, could result in
property damage, data loss, reductions in performance, or
unpredictable results.
TIPS Provides methods to help you solve a problem or save time.
NOTE Provides additional information as a supplement to the text.
Revision History
Version Revision Content Release Time
V1.0.0 First release. November 2022
Privacy Protection Notice
As the device user or data controller, you might collect the personal data of others such as their face,
fingerprints, and license plate number. You need to be in compliance with your local privacy
protection laws and regulations to protect the legitimate rights and interests of other people by
implementing measures which include but are not limited: Providing clear and visible identification
to inform people of the existence of the surveillance area and provide required contact information.
About the Manual
The manual is for reference only. Slight differences might be found between the manual and the
product.
We are not liable for losses incurred due to operating the product in ways that are not in
compliance with the manual.
The manual will be updated according to the latest laws and regulations of related jurisdictions.
For detailed information, see the paper user’s manual, use our CD-ROM, scan the QR code or visit
our official website. The manual is for reference only. Slight differences might be found between
User’s Manual
III
Important Safeguards and Warnings
This section introduces content covering the proper handling of the relay, hazard protection, and
protection of property damage. Read carefully before using the relay, and comply with the
guidelines when using it.
Operation Requirements
Make sure that the power supply of the relay works properly before use.
Do not pull out the power cable of the relay while it is powered on.
Only use the relay within the rated power range.
Transport, use and store the device under allowed humidity and temperature conditions.
Prevent liquids from splashing or dripping on the device. Make sure that there are no objects
filled with liquid on top of the relay to avoid liquids flowing into it.
Do not disassemble the relay.
Installation Requirements
Connect the relay to the adapter before power on.
Strictly abide by local electrical safety standards, and make sure that the voltage in the area is
steady and conforms to the power requirements of the relay.
Do not connect the relay to more than one power supply. Otherwise, the might become
damaged.
Observe all safety procedures and wear required protective equipment provided for your use
while working at heights.
Do not expose the relay to direct sunlight or heat sources.
Do not install the relay in humid, dusty or smoky places.
Install the relay in a well ventilated place, and do not block the ventilator of the device.-
Use the power adapter or case power supply provided by the device manufacturer.
The power supply must conform to the requirements of ES1 in IEC 62368-1 standard and be no
higher than PS2. Note that the power supply requirements are subject to the device label.
Connect class I electrical appliances to a power socket with protective earthing.


Product specificaties

Merk: Dahua Technology
Categorie: Alarmsysteem
Model: ARM7011-W2

Heb je hulp nodig?

Als je hulp nodig hebt met Dahua Technology ARM7011-W2 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Alarmsysteem Dahua Technology

Handleiding Alarmsysteem

Nieuwste handleidingen voor Alarmsysteem