Dahle 20834EC Handleiding

Dahle Papiervernietiger 20834EC

Lees hieronder de 📖 handleiding in het Nederlandse voor Dahle 20834EC (4 pagina's) in de categorie Papiervernietiger. Deze handleiding was nuttig voor 20 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4

20800 SERIES

DEPARTMENTAL SHREDDERS

20801 S

20801 C

20800 EC

20814

20822 EC

20830 EC

20831 EC

20835 EC

OPERATION MANUAL

20800.90.0830 - 01/04 –

Dahle North America, Inc.

375 Jaffrey Road

Peterborough, NH 03458

Tel: (603) 924-0003 • Fax: (603) 924-1616

Email: shredders@dahle.com

w w w . d a h l e . c o m

Congratulations on your purchase of a DAHLE Paper Shredder! We here at

DAHLE North America are dedicated to providing rugged and dependable

products for the large, and not so large office. We are sure your new DAHLE

Paper Shredder will meet or exceed your expectations of quality and service.

If you have any questions regarding your new DAHLE paper shredder, call your

sales representative, or call DAHLE N.A. Customer Service, toll free, at (800) 995-

1379 between 8:30 am and 5:00 pm Monday through Friday, EST.

Check off the model and record the serial number for your records in the space

provided below.

❏ ❏ ❏ ❏ 20801 S 20801 C 20800 EC 20814 ❏ 20822 EC

❏❏❏ 20830 EC 20831 EC 20835 EC

Serial Number: __________________________

DIAGRAM KEY

1. Main Plug

2. Feed Opening

3. Light Barrier

4. Bag Full Indicator

5. Door Ajar Indicator

6. Paper Jam Indicator

7. Forward Switch (electronic models)

7a. Reverse Switch (electronic models)

8. Power Switch (electronic models)

8a. On/Off/Reverse (manual models)

9. Shred Bag

10. Waste Bin

11. Door Handle

12. Door

BEFORE YOU CALL FOR SERVICE

SYMPTOM POSSIBLE CAUSES SOLUTION

No Power 1. ON/OFF Switch set to

wrong postion

Move Switch to “I” (on)

position

2. Unit unplugged Connect to outlet

3. Outlet dead Reset circuit breaker

4. Door not fully closed Close Door

5. Waste Bin full Empty Waste Bin

Low capacity 1. Cutting blades dry Lubricate cutting blades

according to instructions.

DAHLE SHREDDER SUPPLIES AND ACCESSORIES

Shred Bags (100 per box)

Item No. Models

701 Personal & 20300 Series

704 20400, 20500 & 20600 Series

705 20800 Series

706 High Capacity Models

Waste Bin

805 20800 Series

Shredder Oil (All Models)

740 Box of 4 16oz. Bottles

740G Box of 4 1gal Bottles

740G/1 1 gallon bottle

Automatic Oiling System

SAO-120 4 Liter Auto Oiler

READ ALL INSTRUCTIONS BEFORE OPERATING YOUR SHREDDER IF ANY OTHER PROBLEMS OCCUR. CALL YOUR AUTHORIZED DAHLE SERVICE DEALER

CHANGING THE SHRED BAG

When the Shred Bag (10) is full, the shredder will automatically shut down. On the

electronic models an LED indicator will light and an audible alarm will sound.

Changing the Shred Bag is quick and easy if you follow these simple directions.

1. Turn shredder off.

2. Open Door (12) using Door Handle (11) to expose Waste Bin (10) and Shred

Bag (9).

3. Pull the Waste Bin and full Shred Bag out of the shredder.

4. Dispose of full Shred Bag.

5. Install new Shred Bag in Waste Bin, draping end of Shred Bag over edge of

Waste Bin.

6. Push Waste Bin, with new Shred Bag installed, back into shredder.

7. Close Door (12).

8. Turn on shredder and continue shredding.

CARING FOR YOUR SHREDDER

Clean covers with a clean dry cloth. Do not use water or solvents. Make sure you

disconnect your shredder from its power source before cleaning.

Paper shredders, like all mechanical equipment, need proper maintenance to

ensure efficient operation. Periodic lubrication of the cutting blades is important to

offset the friction generated within the cutting head. Frequency of lubrication will

vary depending on the shred size and the amount of usage. A strip-cut shredder

receiving light use (1 – 2 hours per week) will require lubrication only once or

twice a month, while the same machine used 1 – 2 hours per day will require

lubrication weekly. A cross-cut shredder should be lubricated every ½ hour of

shredding time to maintain maximum capacity and efficiency.

The procedure for lubricating your shredder is simple, and can be performed by

any operator. The oil is packaged in a squeeze bottle and is applied directly to the

cutting blades through the feed opening (3). Run a fine stream of lubricant from

one side of the feed opening to the other. Run the shredder in REVERSE for a

few seconds to help distribute the lubricant evenly. You can now continue

shredding as usual.

DAHLE Shredder Oil is the only lubricant you should use in your paper shredder.

It has been specially formulated so as not to leave any residue that could attract

dust and clog the shredding mechanism. You can order DAHLE Shredder Oil

(item # 740) from your local dealer.

Repairs on your paper shredder should only be performed by qualified

technicians. If you need service, contact your local dealer, or you can contact

DAHLE North America Customer Service between 8:30 am and 5:00 pm EST at

(800) 995-1379.

SAFETY INSTRUCTIONS

• Read the operating instructions carefully before operating your shredder!

• Do not use in the vicinity of flammable liquids or gases.

• Do not use in the vicinity of corrosive materials.

• Do not expose to water or wet conditions.

• Do not let children operate this, or any other, office equipment.

• Do not reach into the cutting mechanism during operation - not even from

the top or with objects.

• Do not operate the shredder for a period of more than 5 minutes in no-load

operation (operation without paper).

• Keep hair clear of machine.

• Keep neckties clear of machine.

• Keep bracelets, or any other jewelry, clear of machine.

• Power connection must be accessible at all times.

• Disconnect from power supply before servicing.

• The safety devices must not be disabled or removed.

• Please make sure that the shredder gets sufficient ventilation (ventilating

grills must kept free).

BEFORE YOU SHRED

• Remove Transport Bolts with wrench provided.

• Record the Model and Serial Number in the space provided inside the front

cover.

• Be sure the electrical outlet provides the proper power for your shredder

(see rating label on rear of shredder).

• Install Shred Bag (see: “CHANGING THE SHRED BAG”).

TURNING ON YOUR SHREDDER

20801 S •••• 20801 C

1. ON, OFF and REVERSE are controlled by the black

Rocker Switch (8a) on the top of the shredder.

2. Moving the switch to the “I” (ON) position

activates the shredding mechanism.

3. Moving the switch to the center or “O” (OFF)

position turns the shredder off.

4. The REVERSE position “R” will be discussed

in “CLEARING A PAPER JAM”.

NOTE: SHREDDER WILL NOT OPERATE UNLESS DOOR IS COMPLETELY CLOSED ALWAYS TURN SHREDDER OFF IF IT WILL BE UNATTENDED FOR LONG PERIODS OF TIME

Product specificaties

Merk:	Dahle
Categorie:	Papiervernietiger
Model:	20834EC
Gewicht:	108862 g
Afmetingen (B x D x H):	647.7 x 431.8 x 851 mm
Werkbreedte:	406 mm
Papier versnipperen:	Ja
Vernietigt tot grootte:	1 x 4.7 mm