Da-Lite Picture King Handleiding

Da-Lite Projectiescherm Picture King

Lees hieronder de 📖 handleiding in het Nederlandse voor Da-Lite Picture King (4 pagina's) in de categorie Projectiescherm. Deze handleiding was nuttig voor 22 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
INSTRUCTION BOOK FOR
Picture King®
2
Setting Up Your ScreenImportant Parts Of Your Da-Lite Screen
Using Screen In Lowest Position
1. Hold screen vertically with tripod just above loor.
With toe, press straight down on toe release plate.
Tripod legs will glide open.
2. Pull out Black Locking Knob at top of bottom tube.
3. Raise extension tube to irst position, and then swing
case to horizontal position.
4. Raise screen surface and pull bail over hanger.
If Keystone Eliminator is to be used, (1) simply grasp the
knurled tip which protrudes slightly above the hanger; (2) pull
straight up; (3) then lay in a horizontal position over the
hanger, and place the pull bail on it.
5. Release Black Locking Knob and fabric tension lock
lever on handle.
6. Holding extension tube with one hand and releasing
Black Locking Knob with other, raise extension tube to
desired position.
7. The case position may be changed by pulling out the
Black Locking Knob located on the handle.
8. When case at desired position, lock into place by
pressing down on the fabric tension lock lever.
(When ordering parts, please specify screen model and size.)
Follow steps 1 through 3 above.
a. Raise locking lever on left side of handle.
b. Release black knob and lower case.
c. Holding bottom tube, raise extension tube until
it locks into desired position.
1) Slat
2) Saddle
3) Pull Bail
4) Hanger Hook
5) Picture Surface
6) Extension Tube
7) Black Locking Knob
8) Bottom Tube
9) Handle
10) Roller
11) Tripod
12) Leg Bracket
13) Toe Release &
Leg Lock
14) Leg Shoes
15) Fabric Tension
Lock Lever
16) End Cap
17) Screen Case
18) Black Locking Knob
19) Slat Caps
1 2 3 4
5
6
7
8
9
10
12
13
14
15
16
17
18
19
11
3
Closing The Screen
Protect Your Screen
1. Return screen case to original central position on center tube.
2. Hold extension tube irmly. Pull out top Black Locking Knob
and lower extension tube to bottom position.
3. Unhook screen pull bail and complete re-rolling fabric
into case.
4. If Keystone Eliminator has been used, simply raise it
to a perpendicular position and push it back into the
extension tube.
5. Swing case to vertical position. Note that fabric locks in.
6. Set tab on hanger in opening of case end cap. As extension
tube locks, the case also is locked.
7. Place tip of middle inger of right hand in depression beneath
leg bracket. Lift leg bracket sharply, at the same time applying
a slight lift to entire unit with left hand. that legs are NOTE
closed and locked, hanger, and extension tube and case are
locked and surface is locked to provide for safe and
comfortable carrying and storing.
Before re-rolling surface into case, examine both front and
back of surface to be sure they are free of foreign matter.
A Da-Lite Screen carrying case is a wise and economical
investment.
IMPORTANT NOTE:
Use no more tilt than necessary. Use caution in tensioning
screen surface when using Keystone Eliminator. Don't
over-tension!


Product specificaties

Merk: Da-Lite
Categorie: Projectiescherm
Model: Picture King

Heb je hulp nodig?

Als je hulp nodig hebt met Da-Lite Picture King stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Projectiescherm Da-Lite

Handleiding Projectiescherm

Nieuwste handleidingen voor Projectiescherm