Da-Lite Heavy Duty Fast-Fold Deluxe 95746K Handleiding

Da-Lite Projectiescherm Heavy Duty Fast-Fold Deluxe 95746K

Lees hieronder de 📖 handleiding in het Nederlandse voor Da-Lite Heavy Duty Fast-Fold Deluxe 95746K (4 pagina's) in de categorie Projectiescherm. Deze handleiding was nuttig voor 29 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4

INSTRUCTION BOOK FOR

Heavy Duty Fast-Fold®

Deluxe Frame

Instructions

1. Unfold the 4 sections of Heavy Duty Fast-Fold ® Deluxe frame,

lock all latches and lay face up on the loor. See Figure 1.

2. Attach top and bottom sections to side sections and tighten the

Speedy Cranks securely. See Figures 2 and 3. Mount Back Braces

to the top and bottom sections (for screens 22' and wider) and

tighten the winghead screws securely.

Figure 1

Top Section

Stage Right

Side Section

Stage Right

Side Section

Stage Left

Side Section

Bottom Section

Figure 2

Stage Left

Side Section

Figure 3

Top Section

Side

Section

Top/Bottom Section

Side Section

Heavy Duty Fast-Fold® Deluxe Frame Construction

Heavy Duty Leg

Side Frame

ABrace

Anti-Sway Brace

(Mounted Inside When

Used Without Drapes)

Top Frame

Anti-Sway Brace

(Mounted Outside When

Used With Drapes)

Bottom Frame

Back Brace

Mounted To Both

Top And Bottom Of

Frame – For Screens

22' And Wider

3. Attach Heavy Duty Fast-Fold® Deluxe legs to side frame

members at desired height, using Speedy Cranks.

Note color tape on legs and frame. When matched, the

screen height will be 44" of the loor. If legs are too high, top

section or sections may be folded over. Unfold the frame feet

(for screens 17' and wider) and leg feet. See Figure 4. Do not

tighten Speedy Cranks until all are started, then tighten.

4. Lay the frame on the loor.

5. Match top of screen surface (labeled TOP) with top of frame.

6. Snap all four corners.

7. Starting at the bottom section, snap the center button.

Continue snapping the remaining buttons.

8. Snap the top and sides in the same manner.

9. Attach Leg to each side of frame using at least 2 Speedy

Cranks per leg. NOTE: Speedy Crank at bottom of leg should

be on side of leg away from screen. Do not tighten Speedy

Cranks until all are started.

10. Height Adjustment. Heavy Duty Fast-Fold® Deluxe screen

height is adjustable in 6" increments either up or down.

Normal screen height is 44" from bottom of frame to

loor and is the standard height for use with presentation

drapery accessories.

NOTE: Do not extend frame so that more than half

of the frame height is above the top of the legs.

11. Raise front foot of each leg and lock corner brace.

12. With one person at each leg, raise to standing position.

NOTE: With large screens, more than 2 people may be

required.

13. Lower back foot, lock corner brace and attach “A” brace

from rear foot to back member of truss leg.

14. Attach anti-sway braces to legs.

15. To pack, reverse procedure. Use caution to prevent

surface damage.

Instructions

Figure 4

Truss Frame Feet

(For Screens 17' And Wider)

Leg Truss Frame

Leg Feet

Product specificaties

Merk:	Da-Lite
Categorie:	Projectiescherm
Model:	Heavy Duty Fast-Fold Deluxe 95746K
Gewicht:	- g
Montagewijze:	Vloer
Zichtbare schermhoogte (h):	1828.8 mm
Zichtbare schermbreedte (b):	2438.4 mm
Diagonaal:	- "
Type aandrijving:	Handmatig
Totale grootte van het scherm (hoogte x breedte):	213.4 x 274.3 cm
Formaat:	Vierkant