D-Link DSL-2640R Handleiding

D-Link Router DSL-2640R

Lees hieronder de 📖 handleiding in het Nederlandse voor D-Link DSL-2640R (40 pagina's) in de categorie Router. Deze handleiding was nuttig voor 34 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/40
1
Quick Installation Guide+
Installations-Anleitung+
Guide d’installation+
Guía de instalación+
Guida di Installazione+
Installatiehandleiding+
Instrukcja instalacji+
Instalační příručka+
Telepítési Segédlet+
Installasjonsveiledning+
Installationsvejledning+
Asennusopas+
Installationsguide+
Guia de Instalação+
Οδηγός Γρήγορης Εγκατάστασης το+
Vodza brzu instalaciju+
Kratka navodila za namestitev+
Ghid de instalare rapidă+
2
Note :
Using a power supply with a different
voltage rating will damage and void the
warranty of this product.
Quick Installation Guide
DSL-2640R
WIRELESS G
ADSL2+ MODEM
ROUTER
CD-ROM
(D-Link Click’n Connect.
Manual and Warranty)
Ethernet (CAT-5e)
Cable
Power Adapter
If any of the items are missing, please contact your reseller.
Default IP: 192.168.1.1
Default Username: admin
Default Password: admin
1Remove the D-Link Click and
Connect CD. 2A. Be sure your Internet connection
is active. DO NOT plug the router
in yet.
B. Insert the D-Link Click’n Connect CD
into your computer.
Click
Quick Installation
Package Contents
DSL-2640R
WIRELESS G ADSL2+ MODEM ROUTER
RJ-11 cable
3
3
Troubleshooting
1. How do I configure my DSL-2640R router without the CD, or check my
Wireless Network Name (SSID) and Wireless Encryption Key?
• Connect your PC to the router using an Ethernet cable.
• Open a web browser and enter the address http://192.168.1.1
• The default username is ‘admin’. The default password is also ‘admin’.
If you have changed the password and can not remember it, you will need to reset the router
to the factory default setting (steps in question 2), which will set the password back to ‘admin’.
2. How do I reset my router to the factory default settings?
Ensure the router is powered on.
Press and hold the reset button on the back of the device for approximately 6-8 seconds.
The process would take about 30 seconds to complete.
Note: Resetting the router to the factory default will erase the current configuration settings.
To reconfigure your settings, log into the router as outlined in question 1, then run the Setup
Wizard.
3. How do I add a new wireless client or PC if I have forgotten my Wireless
Network Name (SSID) or Wireless Encryption Key?
For every PC that needs to connect to the router wirelessly, you will need to ensure you use
the same Wireless Network Name (SSID) and encryption key as the DSL router has.
Use the web based user interface (as described in question 1 above) to check or choose your
wireless settings.
Make sure you take a note of the settings so that you can enter them into each wirelessly
connected PC. D-Link has provided a handy sticker for you to note them down and attach to
your router, or other location you find most convenient.
4. What can I do if my router is not working correctly?
The manual contains a full troubleshooting section and can be downloaded from the D-Link
website (see below), however there are a few quick steps you can take to try and resolve any
issues:
Check the LED’s on the front of the router. The Power, WLAN, DSL and Internet LED should
be on. One or more of the LAN LED should flash.
Check that all the cables are firmly connected at both ends.
Power the router off for 20 seconds, and then power it back on.
5. Why can I not get an Internet Connection?
For ADSL ISP users please contact your ISP to make sure the service has been enabled/
connected by your ISP and that your ISP username and password are correct.
Technical Support
Thank you for choosing D-Link products. For further information, support, product updates or to
download the User Manual please visit the D-Link website at www.dlink.eu.
www.dlink.co.uk
: 08456 12 0003


Product specificaties

Merk: D-Link
Categorie: Router
Model: DSL-2640R
Kleur van het product: Zwart, zilver
Gewicht: - g
Wi-Fi-standaarden: 802.11g,802.11b
Generatie mobiel internet: 4G
Ethernet LAN: Ja
Inclusief AC-adapter: Ja
Aantal Ethernet LAN (RJ-45)-poorten: 4
Aansluiting voor netstroomadapter: Ja
RJ-11 ports kwantiteit: 1
Wifi-standaard: 802.11g
Interfacetype Ethernet LAN: Fast Ethernet
Ethernet LAN, data-overdrachtsnelheden: 10,100 Mbit/s
Bekabelingstechnologie: 10/100Base-T(X)
Netwerkstandaard: IEEE 802.11b,IEEE 802.11g,IEEE 802.3,IEEE 802.3u
Ondersteunde beveiligingsalgoritmen: WPA-PSK,WPA2
3G: Nee
4G: Nee
Temperatuur bij opslag: -20 - 70 °C
Mobiele netwerkverbinding: Nee
Web-gebaseerd management: Ja
Bandbreedte (eerste): 2.4 GHz
xDSL-verbinding: Ja
MAC adres filtering: Ja
Filtratie: Ja
DHCP server: Ja
Quality of Service (QoS): Ja
DHCP client: Ja
Upstream data snelheid: 1 Mbit/s
Downstream data snelheid: 24 Mbit/s
Relatieve luchtvochtigheid bij opslag (geen condensering): 5 - 95 procent
Network address translation (NAT): Ja
DSL WAN: Ja
Bedrijfstemperatuur (T-T): 0 - 40 °C
Relatieve vochtigheid in bedrijf (V-V): 5 - 95 procent
ADSL2+: Ja

Heb je hulp nodig?

Als je hulp nodig hebt met D-Link DSL-2640R stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Router D-Link

Handleiding Router

Nieuwste handleidingen voor Router