D-Link DIS-100G-10P Handleiding

Bekijk gratis de handleiding van D-Link DIS-100G-10P (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 5 mensen en kreeg gemiddeld 4.7 sterren uit 2 reviews. Heb je een vraag over D-Link DIS-100G-10P of wil je andere gebruikers van dit product iets vragen? Stel een vraag

This document will guide you through the

basic installation process for your new D-Link

Industrial Ethernet Switch.

DIS-100G-10P

Quick Installation Guide

Industrial Ethernet Switch

Documentation is also available

on the D-Link website

#LEDStatusDescription

1PWR1

Solid

Blue

Device Power On

Light

o

Device Power O

2PWR2

Solid

Blue

Device Power On

Light

o

Device Power O

3Alarm

Solid

Red

Only PWR1 or PWR2

connected with power

source.

Light

o

PWR1 and PWR2 both

connected with power

source.

4PoE Max

Solid

Red

PoE budge great than 200W

Light

o

PoE budge less than 200W

5

LED Per

Gigabit

Port

Port 1~8

Solid

Green

When there is a secure

10/100/1000Mbps

connection at the port.

Blinking

Green

When there is reception or

transmission occurring at

the port.

Light

o

No link.

6

LED Per

PoE Port

Port 1~8

Solid

Amber

PD device insert and power

feeding

Light

o

No link.

7

LED Per

SFP Port

Port 1~2

Solid

Blue

When there is a secure

100/1000Mbps connection

at the port.

Blinking

Blue

When there is reception or

transmission occurring at

the port.

Light

o

No link.

Before You Begin

The DIS-100G-10P unmanaged Industrial

Gigabit Ethernet Switch solutions are

designed for supporting standard industrial

applications without complex setup to

make the network truly plug-and-play.

Package Contents

This package should include

the following items:

• DIS-100G-10P switch

• DIN rail mounting kit

• DC power terminal block

• Quick installation guide

• SFP Connector Cover

• Rubber feet

If any of the above items are

damaged or missing, please contact

your local D-Link reseller.

Hardware Overview

LED Indicators

DIS-100G-10P

1

5,6

7

2

3

47

Figure 1

Hardware Installation

Before You Begin

Observe the following precautions to

help prevent shutdowns, equipment

failures, and personal injury:

• Install the DIS-100G-10P in a cool

and dry place. Refer to the technical

specications in the user manual

for the acceptable operating

temperature and humidity ranges.

• Leave at least 10 cm of space

at the top, rear and bottom of

the switch for ventilation.

• Visually inspect the power connector

and make sure that it is fully

secured to the power cord.

• Do not stack any devices

on top of the switch.

• To reduce the risk of electric shock,

the PoE ports on this product must

not be connected to cabling that

is routed outside the building

where this device is located.

• Product shall be used with Class 1 laser

device modules certied by CDRH.

It is also recommended that power and

grounding requirements are investigated

before mounting the DIS-100G-10P, as

access to the switch may be restricted

once it has been installed.

Caution! Hot surface! Do not touch!

PRUDENCE! Surface chaude! Ne pas toucher!

Top Panel Connectors

1

2345

Figure 2

#DescriptionItem

1Switch ground

This is used to connect the

switch to ground.

2

Terminal

block(PWR1)

This is used to connect the switch

to external power sources.

3

Terminal

block(Alarm

port)

This is used to connect the

alarm device.

4

Terminal

block(PWR2)

This is used to connect the

switch to external power

sources.

5

DIP Switch (1)Alarm Enable

DIP Switch (2)PoE Extend Enable (Port 1~4)

DIP Switch (3, 4)Reserved

Product specificaties