CyberPower SB0802AD-DE-B50 Handleiding

Bekijk gratis de handleiding van CyberPower SB0802AD-DE-B50 (1 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 18 mensen en kreeg gemiddeld 4.9 sterren uit 8 reviews. Heb je een vraag over CyberPower SB0802AD-DE-B50 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

User’s Manual

Surge Buster

Model Numbers:

SB0502BA-DE SB0602BA-DE SB0702AD-DE SB0802AD-DE

Cord Management Installation:

Installation:

A. Power Connections

1. The surge protector must be plugged into a properly

grounded outlet.

2. Plug all connected equipment directly into the surge

protector.

Note:

DO NOT connect to an ungrounded outlet. DO NOT use

with 2-wire extension cords or adapters. This surge protector

is designed for indoor use only. Install the surge protector

away from heat emitting appliances such as radiators or

heat generators. Do not install where excessive moisture is

present.

Never install electrical or telephone wiring during a lightning

storm.

DO NOT USE FOR MEDICAL, LIFE SUPPORT

EQUIPMENT OR OTHER HIGH RISK ACTIVITIES.

B. Phone/Fax/Modem Connections (Select Models)

To prevent surge damage to telephone equipment, connect

the Phone/Fax/Modem through the surge protector.

If your surge protector has phone jacks:

1. Connect the Phone/Fax/Modem line from your wall

outlet to the IN jack of the surge protector.

2. Connect the phone cord, (not included in this

product), into the OUT jack on the surge protector.

3. Connect the other end of the phone cord to the

Phone/Fax/Modem jack of the device you want to

protect.

C. Coax Cable Connections (Select Models)

To protect a TV or DVR from surge damage, connect the

coax cable through the surge protector.

If you are using a coax cable and your surge protector is

equipped with coax jacks:

1. Connect the Cable/Antenna line from your source to

the IN jack on the surge protector.

2. Connect a coax cable from the OUT jack of the surge

protector to the device you want to protect.

D. Mounting the Surge Protector

You can mount the surge protector to a vertical surface with

just two screws, (not included), using the eye loops provided

at the backside of the Protector.

Power Switch/Indicator

Used as the master on/off switch for outlets. The indicator

light is on when power on. When power off, the indicator

light is off as well.

Warranty

CyberPower warrants this product to be free from defect in

electrical parts or manufacture for two (2) years. If a defect

results in product failure during its normal use within the

warranty period, please contact your local dealers and/or

distributors for warranty services.

A

B

C

EN

Caution:

RISK OF ELECTRIC SHOCK – USE ONLY IN DRY

LOCATIONS AND ONLY INDOORS.

" DO NOT PLUG INTO ANOTHER SURGE

PROTECTOR, POWER STRIP, EXTENSION CORD

OR OTHER RELOCATABLE POWER TAP."

This device features an internal protection that will

disconnect the surge protective component at the end of

its useful life but will maintain power to the load now

unprotected.

CyberPower Systems

www.cyberpower.ru

© 2013 CyberPower Systems, Inc.

All rights reserved. All other

trademarks are the property of their respective owners

K09-0000142-01

Product specificaties