CyberPower RCCARD100 Handleiding

Bekijk gratis de handleiding van CyberPower RCCARD100 (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 107 mensen en kreeg gemiddeld 4.4 sterren uit 3 reviews. Heb je een vraag over CyberPower RCCARD100 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Copyright © 2021 Cyber Power Systems, Inc. All rights reserved.

2

31

INSTALLATION GUIDE

3. Insert and tighten the

retaining screws.

4. Connect an Ethernet cable to

the Ethernet port of the

Remote Cloud Card.

2. Install the Remote Cloud

Card into the expansion slot.

1. Remove the two retaining

screws from the expansion

slot, and remove the cover.

Step 1. Hardware Installation

Definitions for the LED Indicators

Step 2. Application Installation

Install the “POWERPANEL” application available for download on

the Apple App Store or Google Play, then launch the application.

Figure 1

Step 3. Sign Up and Login, as shown in Figure 1

Step 4. Add a device in the POWERPANEL app

1. Click “+” in the upper right corner of the homepage, as shown in

Figure 2.

Figure 2

iOSAndroid

Tx/Rx

Link

RCCARD100

CyberPower

Tx/Rx

RCCARD100

CyberPower

Link LED color

O

On (Yellow)

Tx/Rx LED color

O

On (Green)

Flashing

Condition

The Remote Cloud Card is not connected to the

Network/ or the Remote Cloud Card power is o.

The Remote Cloud Card is connected to the Network.

The Remote Cloud Card power is o.

The Remote Cloud Card power is on.

- Receiving/transmitting data packet

- Reset finished

Quick Start Guide

REMOTE CLOUD CARD

RCCARD100

REMOTE CLOUD CARD

RCCARD100

NOTE: The Remote Wireless Cloud Card is

hot-swappable, so you do not need to turn o the

device to install it.

QR Code

LINK IndicatorTx/Rx Indicator

Ethernet Port

Cloud

Figure 3

2. Locate the “Add Device by QR Code” to add your Remote Cloud Card.

3. Scan the QR Code on the Remote Cloud Card you are adding.

If the QR Code scan was successful, click “Add” and name the

device you are monitoring.

4. After the setup is completed, you will see your device on the

homepage, as shown in Figure 3.

Product specificaties