CyberPower Professional CSP604T Handleiding

Bekijk gratis de handleiding van CyberPower Professional CSP604T (4 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 14 mensen en kreeg gemiddeld 4.6 sterren uit 3 reviews. Heb je een vraag over CyberPower Professional CSP604T of wil je andere gebruikers van dit product iets vragen? Stel een vraag

CONGRATULATIONS ON YOUR PURCHASE

Thank you for selecting the CyberPower CSP604T/

CSP606T Surge Protector. This manual explains the

features and operation of the CSP604T/CSP606T. Please

take a few moments to read this manual.

FEATURES

1. ON/OFF Reset Control Switch and Circuit Breaker

Controls power to all outlets. The switch is also a 15 A

breaker. When an overload occurs, it will automatically

switch o. To resume operation, ensure the overload

condition is removed and reset the surge protector by

switching the unit ON.

2. Standard Grounded Outlets (6)

3. Surge Protected Data Line Connections

To protect your equipment from surge along phones/

fax/modems lines.

A. Connect the phone line from wall outlet into the

“In” port.

B. Connect the phones/fax/modems line in the

“Out” port.

SPECIFICATIONS

• Model Number: CSP604T/CSP606T

• Outlets: Standard Grounded Outlets (6)

• Surge Protection: 1,350 Joules

• Electrical Rating: 125 V/15 A/1875 W

• UL Clamping Voltage: UL 1449 3rd/400 V (H-N, H-G, N-G)

• Maximum Peak Current: 60,000 A

• 3 AC Lines Protected:

H-N: 30,000 A

H-G: 15,000 A

N-G: 15,000 A

The maximum surge possible on household wiring is

6,000 volts)

• Response Time: Less than 1 nanosecond

• Attenuation: Up to 43 dB

• Telecommunications Protection: RJ11 1 in/1 out

• Circuit Breaker: Resettable 15 Amp

• EMI/RFI Filtration: 150 kHz to 100 MHz

CAUTION

TO REDUCE THE RISK OF ELECTRIC SHOCK - Use only in

dry locations and only indoors. DO NOT plug into another

relocatable power tap. DO NOT “daisy chain” surge

protectors. DO NOT use with any aquarium equipment.

DO NOT use if properly grounded outlets are not

available. DO NOT install this device if there is less than 10

meters (30 feet) or more of wire between the electrical

outlet and electrical service panel. DO NOT use for

medical or life support equipment. This device features an

internal protection that will disconnect the surge

protective component at the end of its useful life, but it

will maintain unprotected power to the load. If this

situation is undesirable for the application, follow the

manufacturer’s instructions for replacing the device.

TROUBLESHOOTING

▪ If the ON/OFF is switched OFF, the 15 Amp circuit

breaker may have tripped. Examine your connected

equipment and remove the device that is overloading the

circuit. Then, turn the ON/OFF switch back to RESET.

TECHNICAL SUPPORT

Please contact our Tech Support Department with

installation, troubleshooting, or general product questions.

• Phone: 1-877-297-6937

• Email: tech@cpsww.com

• Hours of Operation:

Monday – Friday 7:00am – 6:00pm CST

USER MANUAL

6-Outlet Surge Protector

CSP604T/CSP606T

6-Outlet Surge Protector

CSP604T/CSP606T

12

Copyright © 2019 Cyber Power Systems (USA), Inc. All rights reserved.

1

3

2

Product specificaties