CyberPower Home Office P403URC1 Handleiding

CyberPower Niet gecategoriseerd Home Office P403URC1

Lees hieronder de 📖 handleiding in het Nederlandse voor CyberPower Home Office P403URC1 (5 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 15 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/5

CONGRATULATIONS ON YOUR PURCHASE

Thank you for selecting the CyberPower P403URC1 Surge

Protector. This manual explains the features and operation of the

P403URC1. Please take a few moments to read this manual.

FEATURES

1. ON/OFF Reset Control Switch and Circuit Breaker

Controls power to all outlets. The switch is also a 15 A breaker.

When an overload occurs, it will automatically switch o. To

resume operation, ensure the overload condition is removed

and reset the surge protector by switching the unit ON.

2. Standard Grounded Outlets (4)

3. USB Charging Ports* (2)

Connect and charge up to two (2) USB devices using the surge

protected USB charging ports.

*USB outlets cannot be used as a USB hub. This device does

not transfer data.

SPECIFICATIONS

• Model Number: P403URC1

• Outlets: Standard Grounded Outlets (4), USB Charging Ports (2)

• Power Cord Length: 3 ft

• Plug Type: Low Proﬁle

• Surge Protection: 500 Joules

• Electrical Rating: 125 V/15 A/1875 W

• USB Charging Rating: 5 V/2.4A total

• UL Clamping Voltage: UL 1449 4th/800 V (L-N)

• Maximum Peak Current: 15,000 A

• 1 AC Line Protected: L-N: 15,000 A (The maximum surge possible

on household wiring is 6,000 volts)

• Response Time: Less than 1 nanosecond

• Circuit Breaker: Resettable 15 Amp

CAUTION

TO REDUCE THE RISK OF ELECTRIC SHOCK - Use only in dry

locations and only indoors. plug into another relocatable DO NOT

power tap. “daisy chain” surge protectors. DO NOT DO NOT use

with any aquarium equipment. DO NOT use if properly grounded

outlets are not available. install this device if there is less DO NOT

than 10 meters (30 feet) or more of wire between the electrical

outlet and electrical service panel. DO NOT use for medical or life

support equipment. This device features an internal protection that

will disconnect the surge protective component at the end of its

useful life, but it will maintain unprotected power to the load.

TROUBLESHOOTING

▪ If the ON/OFF is switched OFF, the 15 Amp circuit breaker may

have tripped. Examine your connected equipment and remove

the device that is overloading the circuit. Then, turn the

ON/OFF switch back to RESET.

TECHNICAL SUPPORT

Please contact our Tech Support Department

with installation, troubleshooting, or general

product questions.

• Phone: 1-877-297-6937

• Email: tech@cpsww.com

• Hours of Operation:

Monday – Friday 7:00am – 6:00pm CST

USER MANUAL

4-Outlet Surge Protector

with 2 USB Ports

P403URC1

4-Outlet Surge Protector

with 2 USB Ports

P403URC1

1 2

USB2.4A

CONTACT INFORMATION

Cyber Power Systems (USA), Inc.

4241 12th Avenue East, Suite 400

Shakopee, MN 55379

Toll-free: 1-877-297-6937 | CyberPowerSystems.com

CONFORMANCE APPROVALS

This device complies with Part 15 of the FCC Rules. Operation

is subject to the following two conditions: (1) this device may

not cause harmful interference, and (2) this device must

accept any interference received, including interference that

may cause undesired operation.

This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential

installation. This equipment generates, uses, and can radiate

radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications.

However, there is no guarantee that interference will not occur

in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can

be determined by turning the equipment o and on, the user

is encouraged to try to correct the interference by one or more

of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent

from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician

for help.

WARNING: Changes or modiﬁcations not expressly approved

by the party responsible for compliance could void the user's

authority to operate the equipment.

LIMITED LIFETIME WARRANTY AND CONNECTED

EQUIPMENT GUARANTEE

Read the following terms and conditions carefully before

using the CyberPower P403URC1 (the “product”). By using

the product, you consent to be bound by the terms and

conditions of this limited lifetime warranty and connected

equipment guarantee (together referred to as this

“warranty”). IF YOU DO NOT AGREE TO THE TERMS AND

CONDITIONS OF THIS WARRANTY, YOU SHOULD RETURN

THE PRODUCT FOR A FULL REFUND PRIOR TO USING IT.

Who is providing this warranty, and what does it cover?

Cyber Power Systems (USA), Inc. (“CyberPower”) provides

this limited lifetime warranty. It only covers the original

purchaser and ends if you no longer own the product. This

warranty covers defects in materials and workmanship in the

product under normal use and conditions. It also covers

equipment connected to the product and damaged because

of the failure of the product. This warranty covers the product

and connected equipment for as long as you own the product.

How do you open a connected equipment claim?

1. Call us at (877) 297-6937, or write to us at:

Cyber Power Systems (USA), Inc.

4241 12th Avenue East, Suite 400

Shakopee, MN 55379,

or send us an email at claims@cpsww.com within 10 days of

the occurrence for instructions.

2. When you contact CyberPower, identify the product, the

purchase date, and the item(s) of connected equipment.

Have information on all applicable insurance or other

resources of recovery/payment that are available to the

initial customer, and request a claim number.

3. You must provide a dated purchase receipt (or other proof

of the original purchase) for the CyberPower unit and

connected equipment. You also need to provide a

description of the damage to your connected equipment.

4. Pack and ship the product to CyberPower and the item(s)

of connected equipment, a repair cost estimate for the

damage to the connected equipment, and all claim forms

that CyberPower provides to you. Show the claim number

on the shipping label, or include it with the product. You

must prepay all shipping costs. You are responsible for

packaging and shipment, and you must pay the cost of the

repair estimate.

What will CyberPower do to correct problems?

CyberPower will inspect and examine the product. If the

product is defective in material or workmanship, CyberPower

will replace it at CyberPower’s expense, or CyberPower will

refund the full purchase price you paid for the product

(purchase receipt showing price paid is required). If the

product failed to protect any equipment plugged into it, we

will also send you forms for making your claim for the

connected equipment. We will repair or replace the equipment

that was damaged because of the failure of the product or

pay you the fair market value (NOT REPLACEMENT COST), of

the equipment at of the time of the damage. We will use Orion

Blue Book, another third-party valuation guide, eBay,

Craigslist, or other source to establish that amount. Our

maximum liability is limited to $15,000 for the P403URC1.

Who pays for shipping?

We pay shipping when we send items to you; you pay when

you send items to us.

What are some things this Warranty does not cover?

1. THIS WARRANTY DOES NOT COVER: ANY SOFTWARE

THAT WAS DAMAGED, SOFTWARE THAT NEEDS TO BE

REPLACED DUE TO THE FAILURE OF THE PRODUCT, OR

ANY DATA THAT IS LOST AS A RESULT OF THE FAILURE.

THIS WARRANTY DOES NOT COVER THE RESTORATION

OF DATA OR RECORDS, OR THE REINSTALLATION

OF SOFTWARE.

2. This warranty does not cover: misuse, modiﬁcation,

operation or storage outside of the environmental limits of

the product or the equipment connected to it. It does not

cover damage while in transit or in storage; if there has

been improper operation or maintenance, or use with

items not designed or intended for use with the product,

such as laser printers, appliances, aquariums, medical, or

life support devices, etc.

What are the other limitations?

The sole and exclusive remedies of the initial customer are

those provided by this warranty.

1. This warranty does not apply unless the product and the

connected equipment were connected to properly wired

and grounded outlets (including compliance with electrical

and safety codes of the most current electrical code),

without the use of any adapters or other connectors.

2. The product must have been plugged directly into the

power source. The equipment connected to the product

must be directly connected in the product, not “daisy

chained” together in serial fashion with any extension

cords, another product, or device similar to the product,

surge suppressor, or power tap. Any such installation voids

the warranty.

3. The product and connected equipment must have been

used properly in a suitable environment, in conformance

with any applicable license, instruction manual, or warnings.

4. The product must have been used at all times within the

limitations on the product’s maximum rated wattage.

Where can I get more information?

Cyber Power Systems (USA), Inc.

4241 12th Avenue East, Suite 400

Shakopee, MN 55379;

Call us at (877) 297-6937;

Send us an email message at claims@cpsww.com.

PRODUCT REGISTRATION

Prompt product registration assures coverage under the

limited lifetime warranty, and also allows the opportunity of

notiﬁcations for product enhancements, upgrades, and

other announcements.

Registration is quick and easy. Go to the Product Registration

Page at CyberPowerSystems.com/registration.

CyberPowerSystems.com

All other trademarks are the property of their respective owners.

This device is manufactured using environmentally-safe

procedures in compliance with the Restriction of Hazardous

Substances (RoHS) directive.

Please join CyberPower in caring for the environment by recycling.

UL Listed to U.S. and Canadian Safety Standards UL 1449. This

product is listed to applicable U.S. and Canadian safety standards

by Underwriters Laboratories Inc.

WARNING: This product can expose you to chemicals including bisphenol A

(BPA) and styrene (ABS), which is known to the State of California to cause

reproductive harm and cancer.

For more information, go to www.P65Warnings.ca.gov.

3 4

K01-0000707-00

Product specificaties

Merk:	CyberPower
Categorie:	Niet gecategoriseerd
Model:	Home Office P403URC1
Kleur van het product:	Wit
Gewicht:	330 g
Breedte:	47 mm
Diepte:	250 mm
Hoogte:	35 mm
Snoerlengte:	900 m
Gewicht verpakking:	5440 g
Breedte verpakking:	35.56 mm
Diepte verpakking:	92.96 mm
Hoogte verpakking:	293.12 mm
Aantal USB-aansluitingen:	2
Materiaal:	Kunststof
Responstijd:	1 ms
Opladen via USB:	Ja
Stekker:	NEMA 5–15P
Surge energy rating:	500 J
Aantal AC uitgangen:	4 AC-uitgang(en)
Nominale input voltage:	- V
Stopcontacttypes:	NEMA 5-15R
Aantal per doos:	1 stuk(s)
EMI/RFI geluidsfiltering:	Ja
Klem voltage:	800 V
EMI/RFI ruisverzwakking:	32 dB
Piekstroom, normale modus:	15000 A
Maximale spanning (gegevenszijde):	6000 V
Herinstelbare stroomonderbreker:	Ja