CyberPower CPS200SU Handleiding

Bekijk gratis de handleiding van CyberPower CPS200SU (2 pagina’s), behorend tot de categorie Accu. Deze gids werd als nuttig beoordeeld door 71 mensen en kreeg gemiddeld 4.0 sterren uit 6 reviews. Heb je een vraag over CyberPower CPS200SU of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Congratulations on your purChase

Thank you for selecting the CyberPower CPS200SU Power

Inverter + USB. The information contained in this brochure

explains the features and operation of the CPS200SU.

Please take a few moments to read this manual.

paCkage Contents

•(1) Power Inverter + USB

•(1) Product Registration Card

•(1) User Manual

Features

1. 2 AC Power Outlets (120v)

2. DC Power Plug

3. 2.1 Amp USB Charging Port

4. Power Status Indicator LED

5. High-Speed Cooling Fan

operating & storage

Operating

•DO NOT allow water or other liquids to come into contact

with the inverter.

•Ambient air temperature should be 32F104F (0C 40C). ° – °°– °

Keep inverter out of direct sun light.

•Keep the inverter’s ventilation slot unobstructed to ensure

airowtotheunit.DO NOT place any items on or over

the inverter during operation. The unit will shut down if it

overheats.

Storage

•Proper storage temperature rang is 32F 86F (0C 30C)°– °°–°

•Store the inverter in a cool and dry environment.

•Avoid exposing the inverter to heating elements, direct

sunlight or high humidity when not in use.

speCiFiCations

•Model Number: CPS200SU

•Input Voltage: 10.5 to 15.5 Volts

•Output Power: 200 Watts (max)

•Output Voltage: 120 Volts

•Output Frequency:60Hz

•USB Voltage: 5Vdc

•Output Waveform: Simulated Sine Wave

•Protection Features: Low Voltage, Overheat,

Overload, Short Circuit

saFety inFormation

• operatetheCPS200SUnearammablematerials,DO NOT

fumes or gasses.

•Always use the inverter where there is adequate ventilation.

DO NOT obstruct the ventilation slots.

•NEVER immerse the unit in water.

•Proper cooling is essential when operating the inverter.

Refrain from placing the inverter near a vehicle’s heat vent or

in direct sunlight.

•Always turn the inverter off when not in use by removing it

from the DC accessory socket.

•Check the warning labels on battery chargers or adapters

before connecting them to the inverter. connect DO NOT

battery chargers or adapters with warnings about using with

inverters.

trouBleshooting

Power Inverter does not provide power:

1. Poor contact with DC power outlet

Ensure the inverter is securely plugged into the vehicle’s DC

power outlet.

2. Automotive electrical system requires ignition to be on

Turn vehicle ignition to “Accessory” position.

3. Vehicle DC power outlet fuse is blown

Check vehicle fuse panel and replace damaged fuse.

4. Overheating

Allow inverter to cool. Ensure that there is adequate

ventilation around the unit.

5. Vehicle battery voltage below 10.5 volts

Unplug inverter and start the vehicle to charge the battery.

6. Vehicle battery voltage higher than 15.5 volts

Check your vehicle’s user guide for trouble shooting.

7. Inverter is overloaded

Ensure load does not exceed the units Continuous Power

rating(seespecications).

teChniCal support

Please contact our Tech Support department with installation,

troubleshooting, or general product questions.

•Phone: 1-877-297-6937

•Email: tech@CPSww.com

•Hours of Operation: Monday – Friday, 8:00am – 5:00pm CST

power inverter + usB

Cps200su

user manual

Product specificaties