Custom VKP60 Handleiding


Pagina's 180 Labelprinter

Bekijk de handleiding van Custom VKP60 gratis online of download de PDF. Deze handleiding is 0 keer bekeken. Vraag over dit model? Stel een vraag

USER MANUAL
VKP60
The format used for this manual improves use of natural resources reducing the quantity of necessary paper to print this copy.
CUSTOM S.p.A. a socio unico
Via Isaac Newton 4
43010 Fontevivo (PR)
Italy
Tel. : +39 0521-680111
Fax : +39 0521-610701
http: www.custom.biz
Customer Service Department:
www.custom4u.it
© 2026 CUSTOM S.p.A. – Italy.
All rights reserved. Total or partial reproduction of
this manual in whatever form, whether by printed
or electronic means, is forbidden. While guarantee-
ing that the information contained in it has been
carefully checked, CUSTOM S.p.A. and other entities
utilized in the realization of this manual bear no
responsibility for how the manual is used.
Information regarding any errors found in it or sug-
gestions on how it could be improved are appreci-
ated. Since products are subject to continuous check
and improvement, CUSTOM S.p.A. reserves the right
to make changes in information contained in this
manual without prior notification.
The pre-installed multimedia contents are protected
from Copyright CUSTOM S.p.A. Other company and
product names mentioned herein may be trade-
marks of their respective companies. Mention of
third-party products is for informational purposes
only and constitutes neither an endorsement nor
a recommendation. CUSTOM S.p.A. assumes no
responsibility with regard to the performance or use
of these products.
THE IMAGES USED IN THIS MANUAL
ARE USED AS AN ILLUSTRATIVE EX-
AMPLES. THEY COULDN’T REPRODUCE
THE DESCRIBED MODEL FAITHFULLY.
UNLESS OTHERWISE SPECIFIED, THE
INFORMATION GIVEN IN THIS MANUAL
ARE REFERRED TO ALL MODELS IN
PRODUCTION AT THE ISSUE DATE OF
THIS DOCUMENT.
GENERAL INSTRUCTIONS
CUSTOM S.p.A. declines all responsibility for ac-
cidents or damage to persons or property occurring
as a result of tampering, structural or functional
modifications, unsuitable or incorrect installations,
environments not in keeping with the equipment’s
protection degree or with the required tempera-
ture and humidity conditions, failure to carry out
maintenance and periodical inspections and poor
repair work.
GENERAL SAFETY INFORMATION
Your attention is drawn to the following actions that
could compromise the characteristics of the product:
• Read and retain the instructions which follow.
• Follow all indications and instructions given on
the device.
• Make sure that the surface on which the device
rests is stable. If it is not, the device could fall,
seriously damaging it.
• Make sure that the device rests on a hard (non-
padded) surface and that there is sufficient
ventilation.
• Do not fix indissolubly the device or its acces-
sories such as power supplies unless specifically
provided in this manual.
• When positioning the device, make sure cables do
not get damaged.
• [Only OEM equipment] The equipment must be
installed in a kiosk or system that provides me-
chanical, electrical and fire protection.
• The mains power supply must comply with the
rules in force in the Country where you intend to
install the equipment.
• Make sure that there is an easily-accessible outlet
with a capacity of no less than 10A closely to
where the device is to be installed.
• Make sure the power cable provided with the ap-
pliance, or that you intend to use is suitable with
the wall socket available in the system.
• Make sure the electrical system that supplies
power to the device is equipped with a ground wire
and is protected by a differential switch.
• Before any type of work is done on the machine,
disconnect the power supply.
• Use the type of electrical power supply indicated
on the device label.
• These devices are intended to be powered by
a separately certified power module having an
SELV, non-energy hazardous output. (IEC60950-1
second edition).
• [Only POS equipment] The energy to the equip-
ment must be provided by power supply approved
by CUSTOM S.p.A.
• Take care the operating temperature range of
equipment and its ancillary components.
• Do not block the ventilation openings.
• Do not insert objects inside the device as this
could cause short-circuiting or damage compo-
nents that could jeopardize printer functioning.
• Do not carry out repairs on the device yourself,
except for the normal maintenance operations
given in the user manual.
• The equipment must be accessible on these com-
ponents only to trained, authorized personnel.
• Periodically perform scheduled maintenance on
the device to avoid dirt build-up that could com-
promise the correct, safe operation of the unit.
• Do not touch the head heating line with bare
hands or metal objects. Do not perform any
operation inside the printer immediately after
printing because the head and motor tend to
become very hot.
• Use consumables approved by
CUSTOM S.p.A.
THE CE MARK AFFIXED TO THE
PRODUCT CERTIFY THAT THE
PRODUCT SATISFIES THE BASIC
SAFETY REQUIREMENTS.
The device is in conformity with the essential
Electromagnetic Compatibility and Electric Safety
requirements laid down in Directives 2014/30/EU
and 2014/35/EU inasmuch as it was designed in
conformity with the provisions laid down in the fol-
lowing Standards:
• EN 55032 (Electromagnetic compatibility of multi-
media equipment - Emission Requirements)
• EN EN55024/EN55035 (Electromagnetic com-
patibility of multimedia equipment - Immunity
requirements)
• EN IEC/EN62368-1 (Audio/video, information and
communication technology equipment)
The device is in conformity with the essential re-
quirements laid down in Directives 2014/53/EU
about devices equipped with intentional radiators.
The Declaration of Conformity and other available
certifications can be downloaded from the site www.
custom4u.it.
GUIDELINES FOR
THE DISPOSAL OF
THE PRODUCT
The crossed-out rubbish bin logo means that used
electrical and electronic products shall NOT be mixed
with unsorted municipal waste. For more detailed
information about recycling of this product, refer to
the instructions of your country for the disposal of
these products.
• Do not dispose of this equipment as miscellane-
ous solid municipal waste, but arrange to have it
collected separately.
• The re-use or correct recycling of the electronic
and electrical equipment (EEE) is important in
order to protect the environment and the wellbe-
ing of humans.
• In accordance with European Directive WEEE
2012/19/EU, special collection points are avail-
able to which to deliver waste electrical and
electronic equipment and the equipment can also
be handed over to a distributor at the moment of
purchasing a new equivalent type.
• The public administration and producers of
electrical and electronic equipment are involved
in facilitating the processes of the re-use and
recovery of waste electrical and electronic equip-
ment through the organisation of collection
activities and the use of appropriate planning
arrangements.
• Unauthorised disposal of waste electrical and
electronic equipment is punishable by law with
the appropriate penalties.
• For the waste sorting of the packaging materials,
please check the local waste disposal laws.

Beoordeel deze handleiding


Product specificaties

Merk: Custom
Categorie: Labelprinter
Model: VKP60

Heb je hulp nodig?

Als je hulp nodig hebt met Custom VKP60 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden