Currys Essentials C140IR10 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Currys Essentials C140IR10 (5 pagina's) in de categorie Strijkijzers. Deze handleiding was nuttig voor 29 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/5
SAFETY FIRST!
Please follow all the safety precautions listed below for safety and to reduce the risk
of injury or electrical shock.
Read all the instructions before operating the appliance and keep them for future
reference. If you pass the product on to a third party, include these instructions.
Unplug the iron from the mains socket when not in use, and before emptying,
filling, or cleaning.
Do not touch the soleplate of the iron if it is hot.
Always hold the appliance by the handle.
Keep the appliance well away from surfaces and objects that can be damaged by
heat.
Ensure there is adequate room to operate the iron.
Ensure that the iron cannot fall into water.
Do not immerse the mains cable in any liquid.
Do not let the mains cable overhang the edge of the work surface or allow it to
touch hot surfaces or sources of heat or flame.
If any part of this appliance is damaged or malfunctions in any way, or the mains
cable or mains plug is broken do not continue to use it. Seek expert assistant.
Do not use the iron if water is leaking from it.
This appliance is not intended for use by persons (including children) with reduced
sensory or mental capabilities, or lack of experience and knowledge unless they
have been given supervision or instructions concerning the use of the appliance
by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
Parents must warn children not to touch hot appliance parts. Close supervision is
necessary when an appliance is used near children.
Small children should not use this appliance.
Do not leave the iron face down at any time. Stand it upright on its heel, on a level
heatproof surface.
Do not use outdoors or in damp or wet conditions.
When placing the iron on its stand, ensure that the surface on which the stand is
placed is stable.
Do not use this iron for professional laundry services.
Do not use this appliance for any purpose not covered by the instructions.
Use caution when turning the iron upside down, there may be hot water in the
water tank.
Use this iron only with a purpose-built ironing board.
Observe all ironing instructions and ironing temperature dot settings given by the
garment manufacturer. These are normally on a label or labels inside the garment.
If the mains cable is damaged it must be replaced by the manufacturer, its service
agent, or similarly qualified persons in order to avoid a hazard.
The iron must not be left unattended while it is connected to the mains socket.
Do not use this iron if it is dropped, has visible signs of damage or is not
watertight.
CARE AND CLEANING
After use, unplug the iron from the mains socket and allow it to cool down fully.
Cleaning:
To remove starch or other deposits from the soleplate, apply a small amount of mild
cleaner to a damp cloth, forming a paste on the cloth. Gently rub the soleplate, then
wipe with a moist cloth.
The body of the iron may now be cleaned with a barely damp cloth and then dried
thoroughly.
Do not wet the appliance body, mains cable or mains plug.
Storage:
When not in use the iron should be securely stored out of the reach children. Store the
iron on its heel with the mains cable loosely looped around the body. Do NOT store
the iron on its soleplate or you may damage the finish.
Never use scouring pads, abrasives or harsh cleaners on the iron body or the
soleplate as this may scratch the surface.
GB - 4 GB - 5
Congratulations on the purchase of your new Currys Essentials
Steam Iron.
We recommend that you spend some time reading this instruction manual in
order to fully understand all the operational features it oers.
Read all the safety instructions carefully before use and keep this instruction
manual for future reference.
S T E AM I R O N
INSTRUC TION MANUAL
C140IR10
DSG Retail Ltd. Maylands Avenue Hemel Hempstead
Hertfordshire HP2 7TG England
Visit Partmaster.co.uk today for the easiest way
to buy electrical spares and accessories. With
over 1 million spares and accessories available
we can deliver direct to your door the very next
day. Visit www.partmaster.co.uk or call 0870 6001 338 (UK customers only) Calls
charged at National Rate.
This symbol on the product or in the instructions means that your
electrical and electronic equipment should be disposed at the end of its
life separately from your household waste. There are separate collection
systems for recycling in the EU. For more information, please contact the
local authority or your retailer where you purchased the product.
SPECIFICATIONS
Voltage Rating: 230V ~50Hz
Power consumption: 1400W
We continually strive to improve our products, specifications may change without
prior notice.
ma x
OPERATION
Fill the iron with water as described above.
Place the iron on its heel on the ironing board rest and connect
the mains cable to the mains socket.
Switch on the power. The mains indicator will illuminate.
Select the correct temperature by turning the Temperature Dial.
Turn clockwise to increase and anticlockwise to reduce temperature.
Note: Some parts have been lightly greased and the iron might smoke slightly when
switched on for the first time. After a short while, this will cease. We
recommend passing the iron over a clean cotton cloth before using it for the
first time. The mains indicator will turn “OFF” when the indicated setting reaches
the correct temperature. The iron is now ready for use. During use the indicator
will light on and off as the thermostat maintains the iron at the correct
temperature setting.
ELECTRICAL INFORMATION
Before using this appliance ensure that the voltage of your electricity supply matches the
voltage indicated on the rating plate of the appliance.
THIS APPLIANCE MUST BE EARTHED.
The ultimate disconnection from the power source is the mains plug. Always make sure it is
easily accessible to be unplugged in the event of an emergency.
This appliance is fitted with a fused three pin mains plug to BS 1363 which is suitable for
use in all houses fitted with mains sockets to current specifications.
If the fitted mains plug is not suitable, remove the fuse and dispose of the mains plug
safely, immediately after removing it from the mains cable.
Fitting a new mains plug
If for any reason you need to fit a new mains plug, the mains cable must be connected as
shown here. The wires in the mains cable fitted to this appliance are coloured in
accordance with the following code:
If the colours of the wires in the mains cable
of this appliance do not correspond with the
coloured markings identifying the terminals
in your mains plug, proceed as follows:
The wire which is coloured
• Green and Yellow: MUST be connected to
the terminal which is marked with the
letter E (Earth) or symbol or coloured
Green.
• Blue: MUST be connected to the terminal
which is marked with the letter N (Neutral)
or coloured Blue or Black.
• Brown MUST be connected to the terminal
which is marked with the letter L (Live) or
coloured Brown or Red.
Before refitting the mains plug cover, check that there are no cut or stray strands of wire
inside the mains plug. Only BSI or ASTA approved 13 Amp BS1362 fuses should be used. If
you are in any way unsure which mains plug or fuse to use, always refer to a qualified
electrician.
Note: After replacing or changing a fuse on a moulded mains plug which has a fuse cover,
the cover must be refitted to the mains plug, the appliance must not be used without a
fuse cover. If lost, replacement fuse covers can be obtained from an electrical shop.
STEAM IRONING
Steam ironing should be carried out at the highest settings on the Temperature Dial.
Steam ironing at lower temperatures may cause water to leak from the soleplate. The
steam is regulated by the Steam button.
8. Handle
9. Cord Grip
10. Mains Indicator
11. Temperature Dial
12. Filler Cup
13. max Water Level Mark
1. “Shot of Steam” Button
2. Spray Button
3. Steam Button
4. Water Filler
5. Spray Nozzle
6. Water Reservoir
7. Iron Soleplate
Maintaining the finish of the irons soleplate is essential. Keep the soleplate
smooth: do not scratch it on metal objects (e.g. the edge of the ironing
board, buttons, zippers, etc.) as these may impair performance.
The iron gives off steam continuously only if you hold the iron horizontally.
You can stop the continuous steam by placing the iron in a vertical position
or by keeping the Steam button depressed for more than 5 seconds.
To avoid staining, do not use the spray on silk
or synthetics, and be very careful when you
iron delicate fabrics.
SPRAY BUTTON
Press the Spray button to spray water on the fabric. It may be used during steam and
dry ironing.
During ironing:
In between operations and when filling the iron always stand the iron on its heel.
NEVER leave the iron face down.
After you have nished ironing:
Switch the iron off at the mains socket and unplug.
Stand the iron on its heel and let the iron completely
cool down .
When the iron is cool:
Invert the iron and pour away the excess water
from the water reseroir. When pouring away the water,
gently shake the iron to remove any loose
particles from the tank.
For spray and shot of steam functions to
operate, the water tank must be at least
one-quarter full. If these features stop
working, stand the iron on its heel and fill the
water tank.
Steam position: OFF
Press the Steam button to
cut off the steam discharge.
Steam position: ON
Press the Steam button
to discharge steam.
CONNECT GREEN AND YELLOW EARTH (E)TO
CONNECT
BLUE TO
NEUTRAL (N)
MAKE SURE THE OUTER
SHEATH OF THE MAINS
CABLE IS SECURELY HELD
BY THE CLAMP
CONNECT
BROWN TO
LIVE (L)
13 FUSEAMP
GB - 1 GB - 2 GB - 3
UNPACKING
Remove all packaging from the iron. Retain the packaging. If you dispose of it please do so
according to any local regulations.
The following items are included:
The Main Unit • One filler cup (P.N.: 123V0-11)
• Instruction Manual (P.N.: 623V0-1982DNS-2-N)
If items are missing or damaged, please contact Partmaster (UK only)
Tel: 0870 6001 338 for assistance.
PRODUCT OVERVIEW
FIRST TIME USE
Inspect the iron carefully.
Check that the voltage marked on the rating label matches your mains voltage.
Remove any protective film from the soleplate. Polish the soleplate lightly with a clean
soft cloth to remove any residues.
IRONING TEMPERATURES
Check the ironing instructions attached to the article (they are on a label showing a
symbol of an iron). Always follow these ironing instructions. The indications on the
irons temperature dial and the table below will help you.
If there are no ironing
instructions but you know the
fabric, then use the table below.
The table is valid only for the
actual material and does not take
account of any finish applied to
the fabric. Fabrics to which a
finish has been applied (wrinkle
relief, printed T shirts etc.) should
be ironed at a lower temperature.
If the fabric contains mixed fibres, select the lowest ironing temperature of the
composition, e.g. iron a 60% polyester / 40% cotton mix at the temperature indicated
for polyester.
The iron heats up quicker than it cools down. Sort fabrics to be ironed into groups
according to temperature: wool with wool, cotton with cotton, etc. Start by ironing
articles requiring low temperature settings and progress to higher ones.
Note: Do not iron garments that are dirty or stained. The irons heat may set the stain.
Pure (100%) wool fabrics may be pressed with the iron set to a steam position and the
garment protected by a dry cloth.
Garment Label Fabric Type Thermostat Regulation
Synthetic
Low temperature
Silk-wool
• •
Medium temperature
Cotton-linen
• • •
High temperature
Fabric not to be ironed
INCREASEDECREASE
9
1
8
2
3
4
5
713
6
11
10
12
MAX
Do not fill the iron above the mark indicated on the side of the iron. max
FILLING THE IRON
Make sure the iron is unplugged from the mains
socket and the button is at Steam Steam OFF
position .
Tip the iron up slightly and fill it carefully with
fresh water using the supplied filler cup.
If you live in a hard water area, it is advisable to
use distilled or de-mineralised water. Avoid
using water containing softeners, perfumes or
additives.
MAX
max
max
SHOT OF STEAM BUTTON
This feature may be used during steam or dry
ironing but only when the iron is at its highest
setting.
Press the Shot of Steam button to release a
powerful surge of steam. You may need to press the
button a few times to prime the surge of steam.
Wait a few seconds for the steam to penetrate the
fabric before pressing the button again.
Excessive use of this feature will cause the iron to
cool, and the mains indicator will illuminate. If this
happens, wait for the mains indicator to go out
before using the feature again.
ma x


Product specificaties

Merk: Currys Essentials
Categorie: Strijkijzers
Model: C140IR10

Heb je hulp nodig?

Als je hulp nodig hebt met Currys Essentials C140IR10 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Strijkijzers Currys Essentials

Handleiding Strijkijzers

Nieuwste handleidingen voor Strijkijzers