CTA Digital ADD-SUHW Handleiding

Bekijk gratis de handleiding van CTA Digital ADD-SUHW (1 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 3 mensen. Heb je een vraag over CTA Digital ADD-SUHW of wil je andere gebruikers van dit product iets vragen? Stel een vraag

1. Setting up Holder & Tablet

1A. Begin by loosening the four

holder arms. Find the screw on the

body (A) as illustrated and loosen all

with provided tool (D).

Sleek Universal Holder (Black/White)

For 9.7”-12.9” Tablets

1B. After loosening, extend the arms

outwards as far as the range can go.

1C. Insert tablet and retract

the arms to the corners for a

secure and tight fit.

1D. Use provided tool (D)

and rotate as illustrated to

tighten and secure the

holder arms in place.

2. Adjusting the Depth

2A. After properly inserting

tablet into the holder, use the

provided tool to securely fit the

tablet with regrards to the

depth. Rotate clockwise until

securely fastened. Repeat this

for all four holder arms at the

extruded screw spot as

illustrated to the right.

3. Swapping out Corner Arm (optional)

3A. You can switch out the corner arms from an exposed arm to a more solid

arm or vice versa as preferred. Exposed corners allow more access to the

buttons, ports and openings. Simply unscrew and replace.

4. When Mounting to a VESA

Compatible Item

4A. Align VESA holes of tablet holder to that of the VESA compatible item. Rotate

from above as illustrated using provided tool (D) and screws (B) until securely

fastened. Make sure to do this step BEFORE tablet is inserted.

(718) 963-9845 www.ctadigital.comsuppo@ctadigital.com36 Taaffe Place Brooklyn, NY 11205

Product specificaties