Crystorama Oakley OAK-7536-SG_CEILING Handleiding

Bekijk gratis de handleiding van Crystorama Oakley OAK-7536-SG_CEILING (2 pagina’s), behorend tot de categorie Verlichting. Deze gids werd als nuttig beoordeeld door 14 mensen en kreeg gemiddeld 4.6 sterren uit 6 reviews. Heb je een vraag over Crystorama Oakley OAK-7536-SG_CEILING of wil je andere gebruikers van dit product iets vragen? Stel een vraag

24"

ASSEMBLY INSTRUCTION MODEL # OAK-7536-SG_CEILING

How to install

22"

You will need 6 -LED G9 Bulb

2 Watts Recommended 3.5 Watts Max.

USE LED BULBS FOR EXTENDED USE

15"

3.35"

100"

18"

12.4"

THIS FIXTURE IS DAMP RATED

For Hanging:

Crystoramacom.

1.Using a screw driver, remove the three

screws on the light cluster that are

securing the circular ring in place.

2.Remove the circular ring and install the

LED G9 bulbs (included) then tighten

with the previously removed screws.

3.Feed the wire through the rodsFirst remove.

the open hook on the long rod. Thread the

wire through the openhook and then

through the long rod. Finally, tighten the

open hook and the long rodtogether.

Repeat for the other .twolongrod

4.Take the end of the rod with a open hook

And the other end onto the hook on loop kit.

5Decide the preferred hanging height and.

choose the correct chain length needed.

For Ceiling:

1.Repeat step: # 1-2above.

2.Repeat - , step#34abovechangingthelong

rod to short rod. Changing the pendant

canopy(B) to ceiling canopy(L).

and attach it to the top of the fixture frame.

Product specificaties