CRUX VRFGM-80J Handleiding


Bekijk gratis de handleiding van CRUX VRFGM-80J (5 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 19 mensen en kreeg gemiddeld 3.7 sterren uit 10 reviews. Heb je een vraag over CRUX VRFGM-80J of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Pagina 1/5
VRFGM-80J
Front and Rear View Camera Integration Interface for
GM LAN 29-Bit Vehicles 2006-2015
R
INTERFACING SOLUTIONS
Sightline
Multi View Integration
Crux Interfacing Solutions • 21541 Nordhoff St., Unit C, Chatsworth, CA 91311
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
rev.022019
1 of 5
- Adds a front and rear camera input plus 1 extra video input for another camera or video source*.
- Uses a factory steering wheel control buon to force view the aermarket cameras and/or video source.
- Ability to toggle from back-up camera to the extra video input while in reverse gear. Perfect for adding a cargo or
trailer camera.
- Plug and play installaon.
PRODUCT FEATURES:
PARTS INCLUDED:
VRFGM-80J Module VRFGM-80J Harness
OPTIONAL ADD-ON CAMERAS:
Oponal add on cameras are available for the VRFGM-80J. Cameras available and . Please visit sold separately
www.cruxinterfacing.com for a complete list of cameras available for your vehicle. Below are some sample
cameras that can be used :
CFF-01 Bullet Type Front Camera CFF-02 Square Body Front Camera CFF-03 Grille Mount Front Camera
CGM-03 Cargo Camera CUL-16 Lip Mount Rear Camera CGM-02S Tailgate Handle Camera
*Factory Audio Aux Input is required if video input will be used for AV sources.
NOTE:
If your vehicle is not equipped with a factory backup camera, you will need to have the radio coded for a backup
camera at the dealership before using the VRFGM-80J.
Crux Interfacing Solutions • 21541 Nordhoff St., Unit C, Chatsworth, CA 91311
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
rev.022019
2 of 5
INSTALLATION DIAGRAM:
R
INTERFACING SOLUTIONS
Sightline
Multi View Integration
DIP SWITCH SETTINGS:
DIP# ON OFF
1No Funcon – Leave OFF
2 Front Camera ON Front Camera OFF
3 No Funcon – Leave OFF
4No Funcon – Leave OFF
5Video Input / Cargo Camera ON Video Input/Cargo Camera OFF
6 No Funcon – Leave OFF
7No Funcon – Leave OFF
8Set to ON
VRFGM-80J
Front and Rear View Camera Integration Interface for
GM LAN 29-Bit Vehicles 2006-2015
Front Camera Input
Video / Cargo Camera Input
Aftermarket Backup Camera Input
Front and Rear Camera Power Output 12V (purple/white)
Cargo Camera Power Output 12V (orange/white)
To Vehicle Harness
Connect this 6-pin plug if OEM
backup camera is being used
DIP Switches
FORCED VIEW CAMERA SEQUENCE:
Using OEM backup Camera
FRONT VIDEO INPUT/CARGO CAMERA
Using Aermarket backup Camera
FRONT BACKUP VIDEO INPUT/CARGO CAMERA
Crux Interfacing Solutions • 21541 Nordhoff St., Unit C, Chatsworth, CA 91311
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
rev.0220193 of 5
R
INTERFACING SOLUTIONS
Sightline
Multi View Integration
1. Carefully remove the trim around
the radio using plasc pry tools.
2. Remove the 4 screws holding the
radio.
3. Unplug the Black and Brown
connectors and mate them to the
VRFGM-80J T-harness.
4. Mount the cameras to be used and
run the cables to the radio.
5. Plug the camera RCAs to the
corresponding RCA inputs on the
T-harness.
6. Connect the camera power wires to
the corresponding camera power wires
on the T-harness. Apply tape to each
connecon.
7. Prior to reinstalling the radio,
test each camera connected for
funconality. See next page for
Operaon Instrucons.
CFF-03 Grille Mount Front Camera
VRFGM-80J
Front and Rear View Camera Integration Interface for
GM LAN 29-Bit Vehicles 2006-2015
INSTALLATION INSTRUCTIONS:


Product specificaties

Merk: CRUX
Categorie: Niet gecategoriseerd
Model: VRFGM-80J

Heb je hulp nodig?

Als je hulp nodig hebt met CRUX VRFGM-80J stel dan hieronder een vraag en andere gebruikers zullen je antwoorden