CRUX UC-1 Handleiding
CRUX
Niet gecategoriseerd
UC-1
Bekijk gratis de handleiding van CRUX UC-1 (4 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 20 mensen en kreeg gemiddeld 5.0 sterren uit 10.5 reviews. Heb je een vraag over CRUX UC-1 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/4
Adds reverse camera input in Uconnect systems.
Works on diesel powered trucks.
Plug and Play.
- Not compatible with vehicles with heated seats or steering wheel.
Uconnect 8.4” Screen with 52-Pin connector
Screen 6-button/2-knob with 52-Pin connector Uconnect 5”
-button/2-knob with 52-Pin connector Uconnect 4.3” Screen 6
UC-1
Harness
UC-1 Interface Module
rev.031220
1/4
UC-1 Interface Module
UC-1 Harness
Vehicle/ navigation
DIP 1
DIP 2
DIP 3
DIP 4
DIP 5
DIP 6
Video-in-motion permanent
ON
ON
OFF
OFF
OFF
OFF
Video-in-motion selective*
OFF
ON
OFF
OFF
OFF
OFF
*With DIP set to OFF, the green wire is used to activate selective video- -motion function. # 1 in
DIP switch functions of the -1 UC
DIP Activate Video in Motion 1 –
DIP Activate Rear-view camera 2 –
DIP no function 3 –
DIP no function 4 –
DIP CAN-bus termination resistor on the vehicle side 5 –
DIP CAN-bus termination resistor on the head-unit side 6 –
NOTE: If after installing the UC-1 on an 8.4” screen and the factory Bluetooth microphone audio is
low, set the DIP switches to: 1-ON, 2-ON, 3-OFF, 4-OFF, 5-ON, 6- .ON
Pin-assignment (8pin Molex)
Cable colour
Pin-No.
Assignment
● Yellow
Pin 4
CAN-HIGH connection to the head-unit–
● Blue
Pin 3
CAN-LOW connection to the head-unit –
●● Yellow/Black
Pin 8
CAN-HIGH connection to the vehicle –
●● Blue/Black
Pin 7
CAN-LOW connection to the vehicle –
● Red
Pin 1
+12V Constant
● Black
Pin 5
Ground
● Green
Pin 6
Activation of the video- -motion function in
(+12V =Video in Motion, only if DIP1=OFF)
● White
Pin 2
Reverse Trigger output (+12V DC 500mA)
(only if DIP2=ON and reverse gear engaged)
rev.031220
2/4
Connect female 8-pin Molex connector of the UC- harness to male 8pin Molex connector 1
of CAN Interface.
Transfer female 52-pin connector of vehicle harness from rear of the head-unit into male
52-pin connector of the UC- harness. 1
Plug female 52-pin connector of the UC-1 harness into male 52-pin connector on the rear
of the head-unit.
Connections to rear-view camera
Connect the video RCA of the rear-view camera to the female RCA connector of the -UC 1
harness .
Connect the white wire of the UC- harness to the camera power supply (+12V max 500mA). 1
The white wire gets power when the reverse gear is engaged.
rev.031220
3/4
Connecting the CAN interface to the factory Navigation
UC-1
Harness
UC-1
Harness
+12V camera output
(max 500mA)
white wire
Product specificaties
| Merk: | CRUX |
| Categorie: | Niet gecategoriseerd |
| Model: | UC-1 |
Heb je hulp nodig?
Als je hulp nodig hebt met CRUX UC-1 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd CRUX
10 Maart 2025
10 Maart 2025
10 Maart 2025
10 Maart 2025
9 Maart 2025
9 Maart 2025
9 Maart 2025
9 Maart 2025
9 Maart 2025
9 Maart 2025
Handleiding Niet gecategoriseerd
- Varta
- Belkin
- Viewsonic
- Olympus
- GP
- Nuki
- Phonak
- Phanteks
- Overade
- Sunbeam
- LaCie
- YA-MAN
- Voigtlander
- Manley
- Vivax
Nieuwste handleidingen voor Niet gecategoriseerd
18 Juni 2025
18 Juni 2025
18 Juni 2025
18 Juni 2025
18 Juni 2025
18 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025