CRUX SOOGM-16V Handleiding

Bekijk gratis de handleiding van CRUX SOOGM-16V (13 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 26 mensen en kreeg gemiddeld 4.4 sterren uit 5 reviews. Heb je een vraag over CRUX SOOGM-16V of wil je andere gebruikers van dit product iets vragen? Stel een vraag

SOOGM-16V

Radio Replacement with OnStar, SWC Retention and

Video Switcher for GM LAN 29 Bit Vehicles

RADIO REPLACEMENT

SWC RETENTION

+

R

INTERFACING SOLUTIONS

- Retains factory features in select GM LAN 29 Bit vehicles while functioning with an aftermarket radio.

- Pre-programmed to retain factory Steering Wheel Controls.

- Retains OnStar, factory Rear view camera and chime functions.

- Retains factory backup sensors / park assist system.

- Adds automatic speed/time sense front camera view after reverse process.

- Adds Forced front and rear view aftermarket camera inputs while in motion using the factory side mirror controls.

- Supports Bose, non-Bose and Y-91 audio systems.

- EIA color coded wiring for easy installation.

PRODUCT FEATURES:

1. The Front and Rear fading are not retained on Y-91 Bose System.

2. Chime includes: seat belt, check engine, key in ignition, low fuel, low oil and lights on.

NOTES:

PARTS INCLUDED:

SOOGM-16V Module SOOGM-16V Harness Video Harness Antenna Adaptor SWC Cable

SETTING THE AFTERMARKET RADIO BRAND

With the key in the o󰀨 position, set the DIP switches to the corresponding aftermarket radio setting.

DIP SWITCH SETTINGS:

Crux Interfacing Solutions • Chatsworth, CA 91311

phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com

rev.0224211 of 6

NOTE: Cap or Insulate the 3.5mm plug, Blue/Yellow or Green wires if not being used.

3.5MM SWC CABLE

Plug in the 3.5MM to 4-Pin SWC cable to the SWC module.

RADIO BRAND: DIP#: 1 2 3 4

Atoto, Dual, Fahrenheit, Jensen,

Pioneer, Power Acoustik, Soundstream

Blaupunkt, Most o-brand Radio

Alpine

Clarion

Kenwood

JVC

Boss, Old Sony

New Sony

NOTE: For Atoto, Blaupunkt, Dual, Farenheit, Power Acoustik, Soundstream, and most o-brand radios,

check the aftermarket radio’s manual to see if the SWC buttons need to be programmed.

SWC MODULE

DIP SWITCH

1 2 3 4

ON

OFF OFF ON ON

OFF OFF ON ON

OFF OFF ON ON

OFF OFF OFF OFF

OFF ON ON OFF

OFF ON ON ON

OFF ON OFF ON

OFF ON OFF OFF

OFF OFF ON OFF

RED to SWC Key 1

WHITE to SWC Key 2

SHIELD to SWC Ground

For aermarket radios that have wires for SWC connecons, cut o the 3.5mm plug on the Crux SWC Cable and connect the

SWC wires as follows:

Note that there are some radios that only have SWC1 and SWC2, in this case “shield” does not need to be connected.

Product specificaties