CRUX RVCHN-76D Handleiding
CRUX
Niet gecategoriseerd
RVCHN-76D
Bekijk gratis de handleiding van CRUX RVCHN-76D (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 15 mensen en kreeg gemiddeld 4.3 sterren uit 8 reviews. Heb je een vraag over CRUX RVCHN-76D of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/2
RVCHN-76D
Rear View Integration with Lip Mount Camera for
Select Honda Odyssey EX Vehicles with 8” Screen 2011-2013
R
INTERFACING SOLUTIONS
Sightline
Multi View Integration
Crux Interfacing Solutions • Chatsworth, CA 91311
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
rev.102120
1 of 2
- Automacally switches to rear-view when vehicle is in reverse gear.
- Aermarket lip mount rear view camera included.
- Plug & Play Installaon.
PRODUCT FEATURES:
INSTALLATION DIAGRAM:
Video
Connection
WHITE**
Parking Line
Cut = OFF / Connect = ON
BLUE
(not used
keep connected)
**NOTE: Changes to the parking line option
will take eect after a power cycle.
Camera Power
Regulator
*Camera Ground
(to chassis)
Red wire
Not Used (Insulate)
Make sure the arrows
line up and push in
the connectors well.
8” Factory
Screen
Radio
To factory
screen
To factory
harness
Green Connector at fuse Panel
(Driver’s left kick panel)
Pin 4
Brown/Silver wire
(Reverse Camera Trigger)
Use a length of 18 gauge wire (not included) and
tap the RED camera power wire from the Yellow
RCA to the pin# 4 (BROWN/SILVER) wire on the
Green connector in the fuse panel. This is the
factory reverse trigger wire.
PARTS INCLUDED:
RVCHN-76D Harness CUL-03 Lip Mount Camera
RVCHN-76D
Rear View Integration with Lip Mount Camera for
Select Honda Odyssey EX Vehicles with 8” Screen 2011-2013
R
INTERFACING SOLUTIONS
Sightline
Multi View Integration
Crux Interfacing Solutions • Chatsworth, CA 91311
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
rev.102120
2 of 2
VEHICLE APPLICATIONS:
HONDA
2011 - 2013 Odyssey (with 8” screen)
1. Remove the rear ligate panel cover.
2. Drill a 5/8” hole using the hole saw included on the lip under the Honda emblem. Drill the hole at the
as close as you can to the center of the vehicle.
3. Fish the camera cable through 5/8” hole. Do not secure the camera yet unl aer tesng the viewing
angle.
4. Plug the 4 pin barrel connector of the camera cable to the extension cable provided.
5. Route the cable towards the radio locaon.
6. Remove the radio to gain access to the factory screen.
7. Plug the Yellow male RCA of the extension cable to the Yellow female RCA of the RVCHN-76D harness.
8. Unplug the 32 pin connector from behind the screen and plug it to the RVCHN-76D t-harness. Plug the
other end of the t-harness to the screen.
9. To power the camera, you will need to tap the red wire coming out of the Yellow RCA to the BROWN/
SILVER reverse wire found at the fuse panel.
10. Test the camera for funconality before installing. Note that the rear ligate needs to be closed
otherwise the reverse camera will not show on the screen.
INSTALLING THE CAMERA:
Product specificaties
| Merk: | CRUX |
| Categorie: | Niet gecategoriseerd |
| Model: | RVCHN-76D |
Heb je hulp nodig?
Als je hulp nodig hebt met CRUX RVCHN-76D stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd CRUX
10 Maart 2025
10 Maart 2025
10 Maart 2025
10 Maart 2025
9 Maart 2025
9 Maart 2025
9 Maart 2025
9 Maart 2025
9 Maart 2025
9 Maart 2025
Handleiding Niet gecategoriseerd
- Varia
- AVPro Edge
- Wagner
- Truper
- Shadow-Caster
- Leuze Electronic
- Youin
- Clifford
- Raymarine
- Crouzet
- Senseca
- Wiesenfield
- Veho
- Speck
- Veise
Nieuwste handleidingen voor Niet gecategoriseerd
1 Augustus 2025
1 Augustus 2025
1 Augustus 2025
1 Augustus 2025
1 Augustus 2025
1 Augustus 2025
1 Augustus 2025
1 Augustus 2025
1 Augustus 2025
1 Augustus 2025