CRUX DKGM-C2D Handleiding
CRUX
Niet gecategoriseerd
DKGM-C2D
Bekijk gratis de handleiding van CRUX DKGM-C2D (4 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 17 mensen en kreeg gemiddeld 4.4 sterren uit 9 reviews. Heb je een vraag over CRUX DKGM-C2D of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/4
Crux Interfacing Solutions • Chatsworth, CA 91311
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
rev.092921
DKGM-C2D
Radio Replacement with Double DIN Dash Kit for
GM Class II Vehicles 2002 - 2013
1 of 4
- Retains factory features in select GM Class II Data Bus vehicles while functioning with an aftermarket radio.
- Supports Bose, Y-91 and non-amplied audio systems.
- Retains chime functions such as: seat belt, check engine, key in ignition, low fuel, low oil and lights on.
- Retains RAP (Retained Accessory Power).
- Double DIN Dash Kit included.
- EIA color coded wiring for easy installation.
RA D I O RE P L A CEMENT
+
R
INTERFACING SOLUTIONS
DKGM-C2D MODULE DKGM-C2D HARNESS DOUBLE DIN DASH KIT
Crux Interfacing Solutions • Chatsworth, CA 91311
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
DKGM-C2D
Radio Replacement with Double DIN Dash Kit for
GM Class II Vehicles 2002 - 2013
2 of 4
RA D I O RE P L A CEMENT
+
R
INTERFACING SOLUTIONS
SELECTING THE AUDIO SYSTEM:
If the vehicle is equipped with an amplied audio system, the DKGM-C2D has a built-in audio level
adaptor that outputs the proper audio level from the aftermarket radio to the factory amplier. To use this
feature, plug in the male 8-pin connector on the DKGM-C2D harness to the GRAY female 8-pin connector
on the DKGM-C2D module. The module is also labeled “Bose” and “Non Bose” to avoid confusion. (see
picture below)
If the vehicle is NOT equipped with a factory amplied system, plug in the male 8-pin connector to the
BLACK female 8-pin on the DKGM-C2D module.
Non-BOSE
(Non-Amplied)
Connecon
BOSE
(Amplied)
Connecon
CHIME VOLUME ADJUSTMENT:
The DKGM-C2D has a potentiometer to adjust the chime volume. It is set at half way by default. To
adjust the volume, simply use a suitable screw driver and turn the potentiometer clockwise to increase
the volume and counter-clockwise to decrease the volume.
Chime
Volume
Adjustment
rev.092921
Crux Interfacing Solutions • Chatsworth, CA 91311
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
DKGM-C2D
Radio Replacement with Double DIN Dash Kit for
GM Class II Vehicles 2002 - 2013
3 of 4
RA D I O RE P L A CEMENT
+
R
INTERFACING SOLUTIONS
DASH KIT INSTALLATION:
Please make sure that you have all the parts as shown.
(1) Main trim ring
(1) Le ISO mounng bracket
(1) Right ISO mounng bracket
REMOVE ALL TABS ON
BOTH LEFT & RIGHT
BRACKETS
REMOVE TABS ON BOTH SIDES
OF THE TRIM RING
REMOVE ALL TABS ON BOTH SIDES
OF MOUNTING BRACKETS
INSERT CADILLAC BRACKET INTO SLOTS
ON LEFT & RIGHT MOUNTING BRACKETS
For some Cadillac installaon, see diagram below:
rev.092921
Product specificaties
| Merk: | CRUX |
| Categorie: | Niet gecategoriseerd |
| Model: | DKGM-C2D |
Heb je hulp nodig?
Als je hulp nodig hebt met CRUX DKGM-C2D stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd CRUX
10 Maart 2025
10 Maart 2025
10 Maart 2025
10 Maart 2025
9 Maart 2025
9 Maart 2025
9 Maart 2025
9 Maart 2025
9 Maart 2025
9 Maart 2025
Handleiding Niet gecategoriseerd
- Grotime
- IRIS
- Arthur Martin
- NZXT
- Cartoni
- Flaem
- Thor
- Pointer
- Flir
- OP/TECH
- Ulanzi
- Livall
- Simplecom
- Melnor
- ModeCom
Nieuwste handleidingen voor Niet gecategoriseerd
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025