Crunch Power One P1-6.5C Handleiding
Bekijk gratis de handleiding van Crunch Power One P1-6.5C (10 pagina’s), behorend tot de categorie Speaker. Deze gids werd als nuttig beoordeeld door 51 mensen en kreeg gemiddeld 4.3 sterren uit 26 reviews. Heb je een vraag over Crunch Power One P1-6.5C of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/10
SPEAKERS
P1-6.5C / p1-653 / p1-693
Power one
CRUNCH
POWER ONE SERIES
CAR AUDIO SPEAKERS
Congratulations on your purchase of the new Power One Series
speaker system. The Power One speaker series offer superior sonic
accuracy, intense high power sound quality with exotic build
materials and outstanding good looks.
As with all high quality car audio products, we recommend
professional installation by an authorized Crunch dealer.
Your dealers knowledge and experience can ensure a problem free
and cosmetically integrated installation.
If you choose to install the speakers yourself, please read
the entire manual very carefully.
1
Impact Resistant Tweeter Elements
Neo Mylar Soft Dome Tweeter
Installation hardware Included
Silver Alpha-Cellulose Cones
Spade Speaker Terminals
Moisture Resistant Rubber Surround
High Mid-Bass Impact
Anti-Resonant Stamped Steel Basket
Wide Nominal Power Range
2
SPEAKER LOCATION AND MOUNTING TIPS
THE FIRST STEP IS THOROUGH PLANNING BEFORE THE
INSTALLATION BEGINS.
THE SPEAKER SCREW HOLE CONFIGURATION WILL WORK WITH
MOST DOMESTIC AND FOREIGN VEHICLES.
FOLLOW THESE INSTRUCTIONS CAREFULLY TO ENSURE PROPER
IMAGING AND MAXXIMUM PERFORMANCE.
Factory Speaker Replacement Location and Installation
1. Before you alter the vehicles interior materials, be sure there is
adequate room and clearance for the speaker depth to clear the
windows and other moving parts. (See speaker measurement page).
2. If you are using the speaker wires provided in this kit, be sure
to route wires through the factory door grommet as shown in the
speaker mounting diagram.
3. After securing the speaker and checking clearances, connect
the red/black speaker audio wires to the correct speaker + and -
spade terminals.
Custom Speaker Location and Installation
1. Follow steps 1-3 above.
2. Use the speaker mounting diagrams and speaker hole cut-out
dimensions on the following pages.
3. Always mount the left and right side speakers on the same plane.
This means that each speaker should be the same height from
the floor and same distance from the firewall. Do not mount one
speaker higher, lower, further forward or further behind the other.
Product specificaties
| Merk: | Crunch |
| Categorie: | Speaker |
| Model: | Power One P1-6.5C |
Heb je hulp nodig?
Als je hulp nodig hebt met Crunch Power One P1-6.5C stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Speaker Crunch
20 Juni 2023
14 Juni 2023
11 Juni 2023
11 Juni 2023
11 Juni 2023
11 Juni 2023
5 Juni 2023
4 Juni 2023
2 Juni 2023
31 Mei 2023
Handleiding Speaker
- Alecto
- Rapoo
- Celestion
- Kicker
- Earthquake Sound
- Micro Innovations
- ANT
- Monster
- Akg
- Audiovox
- Sweex
- SoundTube
- Magnavox
- Akai
- LG
Nieuwste handleidingen voor Speaker
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025