Crosley Cathedral CR32CD Handleiding

Crosley Radio Cathedral CR32CD

Lees hieronder de 📖 handleiding in het Nederlandse voor Crosley Cathedral CR32CD (6 pagina's) in de categorie Radio. Deze handleiding was nuttig voor 19 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/6
910-255500-001
PROGRA M
PHONES
VOLUME
AM
FM
ON/OF F
PAUSE
PLAY /
STOP
MAX .
REPEAT
TUN ING
CLOSE
OPE N/
B.SK IP F.SKIP CD/ RAD IO
CR32CD
Instruction Manual
CATHERDRAL CD
RISK
C
The lighting flash with
arrowhead symbol, within
an equilateral triangle, is
intended to alert user to
the presence of uninsulated
"dangerous voltage" within
the product's enclosure
that may be of sufficient
magnitude to constitute
risk of electric shock
to persons.
CAUTIO
THE RI
SHOCK
COVER
USER -
PARTS
SERVIC
SERVIC
Specification
Frequency Range : A
: F
Power Supply : A
Power Consumption : 1
Speaker : 3
WARNING:
TO PREVENT FIRE OR SH
APPLIANCE TO RAIN OR M
PILOT LAMPS SOLDERED
PARTS INSIDE. REFER S
PERSONNEL.
* DESIGN AND SPECIFICATIONS
9
General
The unit does not operate
1The AC adapter is not connected. Check to
make sure it is plugged in correctly.
2The unit is not turn on rotate the VOLUME
ON/OFF KNOB (2) from the OFF position past
the î‚“clickî‚” to turn on the unit .
There is no Sound
1Check the volume level by turning the VOLUME
KNOB (2).
CD does not play
1Check to make sure CD is inserted correctly
(label side facing up).
2Check that the surface of the CD is clean
3Make sure function switch is set to CD.
The sound from all speakers is cut off.
HEADPHONE JACK (5)
Listening through Earphones/Headphones
(not included)
Headphone Jack
Troubleshooting
Repeat Repeat all Normal
Programmed Play
1Turn the unit on by turning the ON/OFF KNOB
(2) located on the front panel to the ON position.
2Press the CD/Radio MODE BUTTON (16) to the
CD position.
3Press the OPEN/CLOSE BUTTON (15) to
open the CD DRAWER(10).
4Load the desired CD into the player with the
labeled side of the CD facing up and close the
CD DRAWER(10).
5The LED DISPLAY (18) will flash ( - - ) for a
second and then display the total number of
tracks on the CD.
Note: The display will read î‚“noî‚” if there is no
disc in the unit or the disc cannot be read.
6Press the PLAY/PAUSE BUTTON (6) to begin
playing the CD.
7To skip to a different track, press the FORWARD
SKIP BUTTON (14) or BACKWARD SKIP
BUTTON (13) until you reach the desired
track number. Pressing the FORWARD SKIP
BUTTON (14) will advance forward from track
to track. Pressing the BACKWARD SKIP
BUTTON (13) will skip backwards from track to
track.
8To fast forward through part of a particular track,
press and hold the FORWARD SKIP BUTTON
(14). Playback will resume at the point that
you release the button. To reverse playback,
press and hold the BACKWARD SKIP BUTTON
(13).
9To pause during playback, press the
PLAY/PAUSE BUTTON (6). To resume play,
press the button again.
10 To Stop playback, press the STOP BUTTON (7).
3In Normal mode, the CD will play from track 1 or
the first selected track till the end of the CD and
stop.
4When in Repeat 1, the repeat light will flash and
only the selected song will be repeated. You can
select the song to repeat before you press play
or during playback.
5When in Repeat all, the repeat light will stay on
continuously. In this mode, once the CD is
finished, it will start over from the beginning.
6Pushing STOP BUTTON(7) will clear the Random
and Repeat functions and the unit will return to
Normal Mode.
You can program up to 20 tracks that will play in the
order that you program them.
1In CD Mode with a CD inserted and play stopped,
press the PROGRAM BUTTON (11).
2Select a track you would like to program in
memory by using the Forward or Backward skip
buttons.
3Once you have selected a track, press the
PROGRAM BUTTON (11) again. That track is
now stored.
4Repeat steps 2-3 to store up to 20 tracks.
5When all desired tracks are programmed, press
the PLAY/PAUSE BUTTON (6) to begin playback
of the selected tracks. The tracks will play in the
order in which they were programmed.
6To clear programming, press the stop button.
Programmed tracks will also be cleared if the
CD Drawer is opened or the power is
disconnected.
1There are three modes in which you can listen
to your CD :
Normal, Repeat 1, Repeat all.
2To change between these options, press the
REPEAT BUTTON (16). The play mode will
change in the following sequence.
7
CD Player
Playing a CD Unit Controls
1 Tuner Dial
2 Volume On/Off Knob
3 Play/Pause Indicator
4 AM/FM Button
5 Headphone Jack
6 Play/Pause Button
7 Stop Button
8 Repeat Indicator
9 Repeat Button
10 CD Drawer
11 Program Button
12 Program Indicator
13 Backward Skip Button
14 Forward Skip Button
15 Open/Close Button
16 CD/RADIO Mode Button
17 Tuning Knob
18 LED Display
Play Mode


Product specificaties

Merk: Crosley
Categorie: Radio
Model: Cathedral CR32CD

Heb je hulp nodig?

Als je hulp nodig hebt met Crosley Cathedral CR32CD stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Radio Crosley

Handleiding Radio

Nieuwste handleidingen voor Radio