Crestron FTA-CP-RJ45-102 Handleiding

Crestron Niet gecategoriseerd FTA-CP-RJ45-102

Lees hieronder de 📖 handleiding in het Nederlandse voor Crestron FTA-CP-RJ45-102 (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 81 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2

Crestron FTA-CP Series

Connector Plates

Installation Guide

INSTALLATION

To install an FTA-CP Series Connector Plate in a

Crestron® FT Series FlipTop™, use the following

procedure:

1. Remove the two #06-32 x 1/4" screws holding the

original, blank plate in place.

Connector Plate Screw Locations

(FT-600 Shown)

2. Remove the original, blank plate.

3. Place the new connector plate in position.

4. Secure the new connector plate using the two

screws removed in step 1.

Crestron Electronics, Inc. Installation Guide

15 Volvo Drive DOC. 7613A

Rockleigh, NJ 07647 (2038834)

Tel: 888.CRESTRON 11.13

Fax: 201.767.7576 Specifications subject to

www.crestron.com change without notice.

Further Inquiries

To locate specific information or resolve questions after

reviewing this guide, contact Crestron's True Blue Support at

1-888-CRESTRON [1-888-273-7876] or, for assistance within

a particular geographic region, refer to the listing of Crestron

worldwide offices at www.crestron.com/offices.

To post a question about Crestron products, log onto

Crestron’s Online Help at www.crestron.com/onlinehelp.

First-time users must establish a user account to fully benefit

from all available features.

Future Updates

As Crestron improves functions, adds new features, and

extends the capabilities of the FTA-CP Series, additional

information may be made available as manual updates. These

updates are solely electronic and serve as intermediary

supplements prior to the release of a complete technical

documentation revision.

Check the Crestron website periodically for manual update

availability and its relevance. Updates are identified as an

“Addendum” in the Download column.

06-32 x 1/4” Screws (2)

The specific patents that cover Crestron products are listed at patents.crestron.com.

Crestron, the Crestron logo, and FlipTop are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United

States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to

either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names

of others. Crestron is not responsible for errors in typography or photography.

This document was written by the Technical Publications department at Crestron.

RETURN AND WARRANTY POLICIES

Merchandise Returns / Repair Service

1. No merchandise may be returned for credit, exchange or service without prior authorization from Crestron. To obtain warranty

service for Crestron products, contact an authorized Crestron dealer. Only authorized Crestron dealers may contact the factory and

request an RMA (Return Merchandise Authorization) number. Enclose a note specifying the nature of the problem, name and phone

number of contact person, RMA number and return address.

2. Products may be returned for credit, exchange or service with a Crestron Return Merchandise Authorization (RMA) number.

Authorized returns must be shipped freight prepaid to Crestron, 6 Volvo Drive, Rockleigh, N.J. or its authorized subsidiaries, with

RMA number clearly marked on the outside of all cartons. Shipments arriving freight collect or without an RMA number shall be

subject to refusal. Crestron reserves the right in its sole and absolute discretion to charge a 15% restocking fee plus shipping costs

on any products returned with an RMA.

3. Return freight charges following repair of items under warranty shall be paid by Crestron, shipping by standard ground carrier. In the

event repairs are found to be non-warranty, return freight costs shall be paid by the purchaser.

Crestron Limited Warranty

Crestron Electronics, Inc. warrants its products to be free from manufacturing defects in materials and workmanship under normal use for a

period of three (3) years from the date of purchase from Crestron, with the following exceptions: disk drives and any other moving or

rotating mechanical parts, pan/tilt heads and power supplies are covered for a period of one (1) year; touch screen display and overlay

components are covered for 90 days; batteries and incandescent lamps are not covered.

This warranty extends to products purchased directly from Crestron or an authorized Crestron dealer. Purchasers should inquire of the

dealer regarding the nature and extent of the dealer's warranty, if any.

Crestron shall not be liable to honor the terms of this warranty if the product has been used in any application other than that for which it

was intended or if it has been subjected to misuse, accidental damage, modification or improper installation procedures. Furthermore, this

warranty does not cover any product that has had the serial number altered, defaced or removed.

This warranty shall be the sole and exclusive remedy to the original purchaser. In no event shall Crestron be liable for incidental or

consequential damages of any kind (property or economic damages inclusive) arising from the sale or use of this equipment. Crestron is

not liable for any claim made by a third party or made by the purchaser for a third party.

Crestron shall, at its option, repair or replace any product found defective, without charge for parts or labor. Repaired or replaced

equipment and parts supplied under this warranty shall be covered only by the unexpired portion of the warranty.

Except as expressly set forth in this warranty, Crestron makes no other warranties, expressed or implied, nor authorizes any other party to

offer any warranty, including any implied warranties of merchantability or fitness for a particular purpose. Any implied warranties that may

be imposed by law are limited to the terms of this limited warranty. This warranty statement supersedes all previous warranties.

Product specificaties

Merk:	Crestron
Categorie:	Niet gecategoriseerd
Model:	FTA-CP-RJ45-102
Kleur van het product:	Zwart
Breedte:	21 mm
Diepte:	88 mm
Hoogte:	39 mm
Aantal per verpakking:	1 stuk(s)
Constructietype:	Plat
Aansluiting 2:	2x RJ-45
Aansluiting 1 type:	Vrouwelijk
Aansluiting 2 type:	Vrouwelijk