Crestron FT2A-CBLR-BRKT-1200 Handleiding

Bekijk gratis de handleiding van Crestron FT2A-CBLR-BRKT-1200 (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 5 mensen en kreeg gemiddeld 4.2 sterren uit 3 reviews. Heb je een vraag over Crestron FT2A-CBLR-BRKT-1200 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Quick Start

The Crestron® FT2A-CBLR-BRKT-1200 and FT2A-CBLR-BRKT-1400 brackets mount below

the surface to the front or rear face of the FT2-1200 series and FT-1400 series of FlipTop™

Cable Management Systems, respectively. Each bracket provides slots to accommodate up

to two cable retractors and one power supply holder. The bracket enables cable retractors to

occupy the center module positions inside the FlipTop.

Check the Box

ItemQty

FT2A-CBLR-BRKT-1200 or FT2A-CBLR-BRKT-1400 (P/N 6510689 or 6510688)

Bracket, 9” x 3.6”

1

Screw, 10-32 x 5/16”, SEMS, Pan Head, Phillips (P/N 2007287) 2

Install the Bracket

NOTE: Up to two brackets (front and rear) can be installed on the larger FT2-1400 series

FlipTop. A single bracket can be installed to either the front or rear of the FT2-1200 series

FlipTop.

Determine whether to install the bracket to the front or rear face of the FlipTop. Using a

#2 Phillips screwdriver, position the bracket against the FlipTop and secure with two screws

(provided). Use the following drawings for visual reference.

Front Bracket Installation - FT2-1200 Series FlipTop

(2) Screws

(included)

Bracket

(included)

FT2-1200 Series

FlipTop

Rear Bracket Installation - FT2-1200 Series FlipTop

(2) Screws

(included)

Bracket

(included)

FT2-1200 Series

FlipTop

Front Bracket Installation - FT2-1400 Series FlipTop

(2) Screws

(included)

Bracket

(included)

FT2-1400 Series

FlipTop

FT2A-CBLR-BRKT-1200/FT2A-CBLR-BRKT-1400

Front/Rear Bracket for Two Cable Retractors for FT2-1200 and FT2-1400 Series

Product specificaties