Crestron FT2-1200-ELEC-PTL Handleiding
Crestron
Niet gecategoriseerd
FT2-1200-ELEC-PTL
Bekijk gratis de handleiding van Crestron FT2-1200-ELEC-PTL (9 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 3 mensen en kreeg gemiddeld 4.9 sterren uit 2 reviews. Heb je een vraag over Crestron FT2-1200-ELEC-PTL of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/9
The Crestron® FlipTop™ cable management systemFT2-1200-ELEC-PTL
installs into a table or other horizontal surface to provide modular
connectivity. It features a retracting lid that disappears within the
enclosure. When the lid is retracted, nine module slots are arranged in
one row. The flexible modular design may also be customized with an
assortment of Crestron accessories, and the pass-through lid style
allows cables to be fully extended while the lid is closed.
For more information about the accessories, please visit
www.crestron.com/Crestron-FlipTops. To configure your FlipTop, launch
the .FlipTop Configuration Tool
In
In
In
InIn the
the
the
thethe Box
Box
Box
BoxBox
1
FT2-1200-ELEC-PTL
Additional
Additional
Additional
AdditionalAdditional Items
Items
Items
ItemsItems
2 Locking Bars with screws and gaskets (4532619)
1 Cable, DC Power Splitter (2050094)
1 Connector, Plug (2003575)
1 Holder, Power Supply (2048887)
1 Power Cord, 5 ft 10 in. (1.78 m) (2042043)
1 Power Pack, 24VDC, 2.5 A, 100-240VAC (2045873)
1
Cutout Template (4528347)
FT2-1200-ELEC-PTL
FT2-1200-ELEC-PTL
FT2-1200-ELEC-PTL
FT2-1200-ELEC-PTLFT2-1200-ELEC-PTL
QuickStart
FlipTop™
FlipTop™
FlipTop™
FlipTop™FlipTop™ FT2
FT2
FT2
FT2FT2 Series
Series
Series
SeriesSeries Cable
Cable
Cable
CableCable Management
Management
Management
ManagementManagement System,
System,
System,
System,System, 1200
1200
1200
12001200 Size,
Size,
Size,
Size,Size, Electrical,
Electrical,
Electrical,
Electrical,Electrical, Pass-Through
Pass-Through
Pass-Through
Pass-ThroughPass-Through Lid
Lid
Lid
LidLid
1
1
1
11
Mount
Mount
Mount
MountMount the
the
the
thethe FlipTop
FlipTop
FlipTop
FlipTopFlipTop Assembly
Assembly
Assembly
AssemblyAssembly
A mounting hole is required for an FT2-1200-ELEC-PTL installation. Use
the included template to cut a mounting hole for new installations.
When determining the location for the FT2 assembly, consider where
users will be seated and their proximity to the FT2 assembly's modules
and retractors. Refer to the and seriesFT2A-CBLR-1T FT2A-CBLR-GR
cable retractors for above-the-table cable pull-out lengths.
Cut
Cut
Cut
CutCut the
the
the
thethe Mounting
Mounting
Mounting
MountingMounting Hole
Hole
Hole
HoleHole
A saw and the included cutout template are required to cut the
mounting hole.
1. Check the table surface and the area beneath the table. Clear any
obstructions that may impede the installation or functionality of the
FT2 assembly, retractors, and accessories.
2. Using the included cutout template, trace an outline of the mounting
hole onto the table.
3. Cut the mounting hole in the table with an appropriate saw.
Secure
Secure
Secure
SecureSecure the
the
the
thethe FlipTop
FlipTop
FlipTop
FlipTopFlipTop Assembly
Assembly
Assembly
AssemblyAssembly
To prepare the FT2-1200-ELEC-PTL and secure it to the table surface:
1. Gently remove the bezel before securing the FT2 assembly to the
table. It is held in place with magnets.
2. Locate the included DC power splitter cable.
3. On the underside of the FT2 assembly, locate the power bus and
connect the dual-connector ends of the DC power splitter cable to
the two barrel jacks of the power bus. The cable will be accessed later
in .Connect the FlipTop Assembly
2
2
2
22
FT2-1200-ELEC-PTL
FT2-1200-ELEC-PTL
FT2-1200-ELEC-PTL
FT2-1200-ELEC-PTLFT2-1200-ELEC-PTL
QuickStart
FlipTop™
FlipTop™
FlipTop™
FlipTop™FlipTop™ FT2
FT2
FT2
FT2FT2 Series
Series
Series
SeriesSeries Cable
Cable
Cable
CableCable Management
Management
Management
ManagementManagement System,
System,
System,
System,System, 1200
1200
1200
12001200 Size,
Size,
Size,
Size,Size, Electrical,
Electrical,
Electrical,
Electrical,Electrical, Pass-Through
Pass-Through
Pass-Through
Pass-ThroughPass-Through Lid
Lid
Lid
LidLid
4. Ensure that all four swiveling dogs are tucked inside of the FT2
assembly, and then insert the FT2 assembly into the mounting hole
until the top lip is flush with the table surface.
5. Carefully tighten the four swiveling dogs in each corner of the FlipTop
assembly clockwise until the FT2 assembly is secured in place against
the table. Do not overtighten the swiveling dogs.
CAUTION:
CAUTION:
CAUTION:
CAUTION:CAUTION: A screwdriver or manual torque screwdriver at its lowest
setting may be used to tighten the swiveling dogs. Avoid stripping
the swiveling dogs and damaging the table.
If removing the FT2-1200-ELEC-PTL from the table, ensure that
the screwdriver rotation is set correctly before loosening the
swiveling dogs.
Connect
Connect
Connect
ConnectConnect the
the
the
thethe FlipTop
FlipTop
FlipTop
FlipTopFlipTop Assembly
Assembly
Assembly
AssemblyAssembly
Access the two network connectors and two power bus barrel jacks on
the underside of the FT2 assembly.
Connect
Connect
Connect
ConnectConnect the
the
the
thethe Network
Network
Network
NetworkNetwork
Automate the one-touch retractors by connecting all retractors in an
FT2 assembly to a control system and a switch, or to a DMPS via a single
Cresnet® cable. Custom programming can trigger the retractors after
five minutes of no video detected.
Connect the FT2 assembly to a Crestron control system or DMPS3 via
the 3-pin connector using standard Cresnet cable. The red power lead is
not connected and should be terminated.
3
3
3
33
FT2-1200-ELEC-PTL
FT2-1200-ELEC-PTL
FT2-1200-ELEC-PTL
FT2-1200-ELEC-PTLFT2-1200-ELEC-PTL
QuickStart
FlipTop™
FlipTop™
FlipTop™
FlipTop™FlipTop™ FT2
FT2
FT2
FT2FT2 Series
Series
Series
SeriesSeries Cable
Cable
Cable
CableCable Management
Management
Management
ManagementManagement System,
System,
System,
System,System, 1200
1200
1200
12001200 Size,
Size,
Size,
Size,Size, Electrical,
Electrical,
Electrical,
Electrical,Electrical, Pass-Through
Pass-Through
Pass-Through
Pass-ThroughPass-Through Lid
Lid
Lid
LidLid
Product specificaties
| Merk: | Crestron |
| Categorie: | Niet gecategoriseerd |
| Model: | FT2-1200-ELEC-PTL |
Heb je hulp nodig?
Als je hulp nodig hebt met Crestron FT2-1200-ELEC-PTL stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd Crestron
30 Juli 2025
29 Juli 2025
29 Juli 2025
29 Juli 2025
29 Juli 2025
29 Juli 2025
29 Juli 2025
29 Juli 2025
29 Juli 2025
29 Juli 2025
Handleiding Niet gecategoriseerd
- Dacor
- Digiquest
- VirtuFit
- Coolaroo
- ShelterLogic
- Bobrick
- TOZO
- Enerdrive
- After Later Audio
- Enduro
- Synology
- PATLITE
- Mission Air
- BOHLT
- Kata
Nieuwste handleidingen voor Niet gecategoriseerd
30 Juli 2025
30 Juli 2025
30 Juli 2025
30 Juli 2025
30 Juli 2025
30 Juli 2025
30 Juli 2025
30 Juli 2025
30 Juli 2025
30 Juli 2025