Crelando IAN 073860 Handleiding

Crelando Niet gecategoriseerd IAN 073860

Lees hieronder de 📖 handleiding in het Nederlandse voor Crelando IAN 073860 (13 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 32 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/13
Intended use:
The Rhinestone Setter is intended exclusively for use in dry interior
areas. The Rhinestone Setter is an electric heating tool for fixing
rhinestones onto paper, textile, suede, leather, wood, cork and other
materials by means of heated metal tips. The Rhinestone Setter is
suitable for thermo-glue-coated rhinestones rivets, halves of pearls and
shaped stones. These stones and pearls are provided with a thermo
glue coat on the back side. The glue starts to liquefy already from
approximately 120°C and hence makes the connection between the
material and the stone possible. Any other use is not permitted. Such
use can lead to injuries (burns) of the user and damages of the material.
In these cases, the manufacturer carries no liability.
Safety instructions:
 CAUTION! When not in use, this Rhinestone Setter must be placed
on the security stand (picture VIII).
 When the device is placed on the stand, the surface underneath must
be firm, not flammable and horizontal.
 This appliance is not intended for use by persons (including children)
with restricted physical, sensory or intellectual abilities or lacking
experience and/or lacking knowledge unless they are supervised by
a person responsible for their safety or they receive instructions on
how to use the appliance.
 Children should be supervised in order to ensure that they do not play
with the appliance.
 In order to avoid hazards, if the mains connection of this appliance is
damaged, it must be replaced by the manufacturer or his customer
service or a similarly qualified person.
 A fire can break out if the appliance is not handled carefully.
 Ensure that the connecting cable does not come into contact with
heat, oil or sharp edges. Damaged connecting cables can cause fires,
short-circuits and electric shocks.
 Before use, remove combustible objects, liquids and gases from the
working area of the appliance. Keep your working area clean in order
to prevent accidents.
 Before use, check that the tool tip is correctly attached to the appliance.
The hot tips and their receptacles must not be brought into contact
with skin, hair, etc. Risk of burns.
 After use, place the Rhinestone Setter on the stand and allow it to
cool down before packing it away.
 As long as it is in use, do not leave the appliance unsupervised.
 Do not emerge the appliance into water and do not expose it to
moisture. Risk of electric shock!
 When the appliance is not in use, store it in a safe place protected
from dust and moisture.
 Check the appliance for damage. Do not use if damaged!
 During use, ensure adequate ventilation. Ensure that no poisonous
gases or vapours can be inhaled. Wear protective clothing (e.g. long
sleeved clothing, protective goggles).
 For longer work interruptions, disconnect the appliance from the voltage
source.
Avoid use of the appliance on all plastic or synthetic material surfaces.
NOT SUITABLE for surfaces of electronic devices, such as e.g. mobile
phones, as the setter reaches a high temperature and may melt the
material and/or the surfaces.
 Do not decorate clothes of small children with rhinestones (small parts
could get swallowed).
 After fixing the rhinestones wash your hands carefully.
 Observe national and international safety, health and work protection
regulations.
Preparation:
Please take your time and read the operating instructions carefully
before putting the appliance into operation and keep the operating
instructions for future reference.
It is not allowed to change settings or make modifications from those
set by the manufacturer. It could be dangerous to change the structure
of the device on your own authority, to remove parts or to use parts
which are not approved by the manufacturer. (If you change the structure
of the device on your own authority you risk e.g. an electric shock, a
short circuit and burns.)
Scope of delivery:
1 Operating Instructions
1 Rhinestone Setter
8 tip-piece-kit for various stone sizes and forms (tool tips)
1 security stand
2 x 200 rhinestones
Please check the goods for completeness
Instructions for Use
No. 48450
Rhinestone Setter Kit
IAN 73860
EN
Explanation of the pictures:
rhinestone setter
flat tip approximately Ø 5 mm (suitable for all stones smaller than
ø 5 mm).
flat tip approximately Ø 9,5 mm (suitable for all stones bigger than
ø 5 mm and smaller than ø 9,5 mm).
concave tip approximately Ø 7 mm (tip with marking 34. Suitable
for stones from ø 5 mm to ø 7 mm).
concave tip approximately Ø 5 mm (tip with marking 20. Suitable
for stones from ø 4 mm to ø 5 mm).
concave tip approximately Ø 4 mm (tip with marking 16. Suitable
for stones from ø 3 mm to ø 4 mm).
concave tip approximately Ø 3 mm (tip with marking 10.Suitable
for stones from ø 2 mm to ø 3 mm).
concave tip approximately Ø 2 mm (tip with marking 8. Suitable
for stones smaller than ø 2 mm).
mini iron-shaped tip (suitable for all stones with a big surface 
maximum ø 14 mm).
security stand (for safe putting down of the hot Rhinestone Setter).
Explanation of the symbols:
Do touch the tip of the tool! The tip is very hot! Risk of burns!not
Do emerge the appliance into water and do not expose it tonot
moisture. Risk of electric shock!
The temperature on tool tip is very high during operation! Risk
of burns!
Do screw on the tip with force!not
Put away the appliance correctly on the stand, if the tip is hot
and the setter is not in use (picture VIII).
CY
Löt- und Gasgeräte GmbH
Bahnhofstraße 50, D-74254 Offenau
Tel. +49 7136 9594-0
Fax +49 7136 9594-44
Internet: www.cfh-gmbh.de
E-Mail: info@cfh-gmbh.de
Stand: VO-04.12
Important information before putting the device
into operation:
 Read the security instructions before putting the setter into operation!
 Before starting up unpack the Rhinestone Setter Kit completely and
check the contents.
 In the delivery the flat tip ø 9,5 mm is fitted. You must screw this tip off
first, before you start working with another tip.
 To fix stones provided in the delivery, we recommend the use of the
concave tip with marking 16 on it.
 Before you start work, try the appliance and fix a rhinestone on a
unnoticeable place on the material (e.g. on the inner side of the material.
Through this test application you avoid a damage of the material on
a noticeable area).
 The workmanship can be improved if the tip warms up only the stone
and does not come into contact with the glue.
 The correct application of a stone on the material is guaranteed only
if the cut side of the stone is pointing up (picture IV).
 Do not adjust the stone with the glue coated side pointing up (picture
V), otherwise the stone and the tip will stick together.
Putting the device into operation:
 Screw the suitable tool tip onto the Rhinestone Setter. Do not screw
on the tip with force!
 Now place the Rhinestone Setter onto the security stand (see  
picture VIII.).
 Plug in the appliance.
 Let the appliance preheat for 5 minutes till the optimal working
temperature is reached. (The temperature of the tip depends on the
size of the tip.)
 Now place the rhinestone with the cut side pointing up onto the intended
spot of the material (e.g. a leather belt). The side of the rhinestone
coated with glue is placed on the material.
 Now place the Rhinestone Setter with its preheated tip on the top of
the stone carefully and press it lightly. Within seconds the glue will
liquefy and the stone will be stuck to the material.
 To connect a rhinestone to the material you will need approximately
3 - 15 seconds. (This time is necessary for liquefying of the glue and
thus for a successful connection of the stone and material. The length
of the application depends on the size and make of the rhinestones).
Afterwards it is possible to apply the next rhinestone.
 Repeat this procedure until the desired motive is completed.
 Should a rhinestone get blocked in the tip during the application, remove
it with a pair of tweezers. (See picture VI  use a pair of tweezers to
avoid getting burned on the hot tip). Only afterwards a new stone can
be applied.
 In case you need to change the tip when it is still hot, use a tool (e.g.
a pair of tweezers) to avoid getting burned (see picture III).
Switching off:
Place the Rhinestone Setter on the security stand, as shown on picture
VIII. (Improper handling can cause burns and a fire can start.)
Now disconnect the appliance from the voltage supply source (unplug
it). Let the Rhinestone Setter cool down completely. As long as it has
not completely cooled down, do not leave the appliance unsupervised.
(The cooling down time depends on the tip in use. You will need e.g.
appx 20 minutes till the tip with marking 16 cools down after use down
to 25°C. The ambient temperature also has an influence on the cooling
down time. A general rule is that the higher the ambient temperature is,
the longer the cool down takes.
When the completely cooled down appliance is not in use, store it in a
safe place protected from dust and moisture.
Cleaning and maintenance:
Only clean the Rhinestone Setter with a dry cloth when it has cooled
down. Only clean the surface of the tool tip with a dry cloth or a cleaning
fleece (e.g. CFH No. 52349) when it has cooled down. A cleaning fleece
is available in many building stores and can be obtained there. The
Rhinestone Setter is maintenance-free.
Warranty:
To claim the warranty the receipt for payment is absolutely necessary.
All wear parts (e.g. tool tips) are excluded from the warranty. All other
costs as working time, transport, freight and packaging go at the expense
of the buyer in a case of a warranty claim. CFH reserves the right either
to carry itself the expenses which might arise, or to pass them to the
buyer. The warranty does not include claims occurring through operational
difficulties, willful damage, misuse, alterations, misapplication, careless
use, wear or wrong assembly.
Disposal:
The crossed through dustbin on this product indicates that at the end
of its service life the appliance has to be disposed of separately and not
together with household waste. In future, please bring the Rhinestone
Setter to the established municipal collecting points in your local
community.
Technical Data:
Power requirement: 230 V  50 Hz
Output: 6 W
Max. working temperature: approx. 260 °C (depending on the tool tip)
Subject to technical and optical changes.
Service Address & Distributor:

Product specificaties

Merk: Crelando
Categorie: Niet gecategoriseerd
Model: IAN 073860

Heb je hulp nodig?

Als je hulp nodig hebt met Crelando IAN 073860 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd Crelando

Crelando

Crelando IAN 368017 Handleiding

16 Februari 2024
Crelando

Crelando IAN 115769 Handleiding

16 Februari 2024
Crelando

Crelando IAN 73860 Handleiding

16 Februari 2024
Crelando

Crelando IAN 107904 Handleiding

16 Februari 2024
Crelando

Crelando HG05278A Handleiding

16 Februari 2024
Crelando

Crelando IAN 367544 Handleiding

16 Februari 2024
Crelando

Crelando IAN 275590 Handleiding

16 Februari 2024
Crelando

Crelando IAN 317077 Handleiding

16 Februari 2024
Crelando

Crelando IAN 275317 Handleiding

16 Februari 2024
Crelando

Crelando IAN 110416 Handleiding

16 Februari 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Playtive

Playtive IAN 327221 Handleiding

1 Mei 2024
Samsung

Samsung UN32J4001AF Handleiding

1 Mei 2024
Bauknecht

Bauknecht KSI 18GF2 P2 Handleiding

27 April 2024
Fakir

Fakir Artemis TS 150 Handleiding

26 April 2024
Sony

Sony UTX-M03 Handleiding

26 April 2024
Sony

Sony URX-P03 Handleiding

26 April 2024
Sony

Sony WRU-806B Handleiding

26 April 2024
Sony

Sony UTX-B03 Handleiding

26 April 2024
Sony

Sony UTX-P03 Handleiding

26 April 2024
Sony

Sony ODS-L10 Handleiding

26 April 2024