Creality3D CR-10S Pro V2 Handleiding
Creality3D
3D Printer
CR-10S Pro V2
Lees hieronder de 📖 handleiding in het Nederlandse voor Creality3D CR-10S Pro V2 (16 pagina's) in de categorie 3D Printer. Deze handleiding was nuttig voor 64 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/16
CR-10S Pro Printer
Guide Boo
â—†This guide book is for standard CR-10S Pro.
â—†Please plug the power cord into a three-hole power jack.
â—†Detailed instructions for use are available on the TF card.
.1.0
To be the Chief Evangelist
To make Top-quality 3D
Contents
1. Introduction....................................1
2. General List.....................................2
3. Device Installation..........................3
4. Cable Connection............................4
5. Screen Information.........................5
6. Loading Filament............................6
7. Bed Leveling......................................7
8. Software Installation........................9
9. For the First Printing........................10
10. Circuit Wiring...................................11
11. After-Sales Services..........................12
Preface
Dear consumers,
Thank you for choosing our products. For the best experience, please read the instructions before operating the Printer.
Our 3D team will always be ready to give you the best service. Please contact us via the phone number or e-mail address
provided at the end when you encounter any problem with the Printer.
For a better experience in using our product, you may learn how to use the Printer in the following ways:
1. View the accompanied instructions and videos on the TF card.
2. Visit our official website at You will find relevant software/hardware information, contact details and www.creality3d.cn
operation and maintenance instructions on the website.
Notes
1. Do not use the printer any way other than described herein in order to avoid personal injury or property
damage.
2. Do not place the printer near any heat source or flammable or explosive objects. We suggest placing it in a
well-ventilated, low-dust environment.
3. Do not expose the printer to violent vibration or any unstable environment, as this may cause poor print
quality.
4. Before using experimental or exotic filaments, we suggest using standard filaments such as ABS or PLA to
calibrate and test the machine.
5. Do not use any other power cable except the one supplied. Always use a grounded three-prong power
outlet.
6. Do not touch the nozzle or printing surface during operation as they may be hot. Keep hands away from
machine while in use to avoid burns or personal injury.
7. Do not wear gloves or loose clothing when operating the printer. Such cloths may become tangled in the
printers moving parts leading to burns, possible bodily injury, or printer damage.
8. When cleaning debris from the printer hotend, always use the provided tools. Do not touch the nozzle
directly when heated. This can cause personal injury.
9. Clean the printer frequently. Always turn the power off when cleaning, and wipe with a dry cloth to remove
dust, adhered printing plastics or any other material off the frame, guide rails, or wheels . Use glass cleaner
or isopropyl alcohol to clean the print surface before every print for consistent results.
10. Children under 10 years of age should not use the printer without supervision.
Product specificaties
| Merk: | Creality3D |
| Categorie: | 3D Printer |
| Model: | CR-10S Pro V2 |
Heb je hulp nodig?
Als je hulp nodig hebt met Creality3D CR-10S Pro V2 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding 3D Printer Creality3D
18 Juni 2023
11 Juni 2023
Handleiding 3D Printer
- 3D Printer Anker
- 3D Printer BQ
- 3D Printer Dimension
- 3D Printer Gembird
- 3D Printer German RepRap
- 3D Printer GooVer
- 3D Printer Kodak
- 3D Printer MakerBot
- 3D Printer Polaroid
- 3D Printer PP3DP
- 3D Printer Renkforce
- 3D Printer Velleman
- 3D Printer Weistek
- 3D Printer Weller
- 3D Printer 3D Systems
- 3D Printer Exibel
- 3D Printer Monoprice
- 3D Printer Flashforge
- 3D Printer Wanhao
- 3D Printer XYZprinting
- 3D Printer Leap Frog
- 3D Printer Snapmaker
- 3D Printer Easy Threed
- 3D Printer Anycubic
- 3D Printer Artillery
- 3D Printer Zortrax
- 3D Printer LulzBot
- 3D Printer SINDOH
- 3D Printer Creality
- 3D Printer Raise3D
- 3D Printer Craftbot
Nieuwste handleidingen voor 3D Printer
8 April 2024
8 April 2024
8 April 2024
8 April 2024
8 April 2024
8 April 2024
8 April 2024
8 April 2024
8 April 2024
3 April 2024