Cranborne Audio Carnaby 500 Handleiding
Cranborne Audio
Niet gecategoriseerd
Carnaby 500
Bekijk gratis de handleiding van Cranborne Audio Carnaby 500 (1 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 5 mensen en kreeg gemiddeld 3.7 sterren uit 3 reviews. Heb je een vraag over Cranborne Audio Carnaby 500 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/1
1
6
7
8
8
8
9
10
11
12
2
3
4
5
5. OUTPUT LEVEL CONTROL
[±20dB, 1dB steps]
Adjusts the output level of the module
post processing. Set in accordance to
the INPUT LEVEL CONTROL [1] to
maintain unity through the module.
1. INPUT LEVEL CONTROL
[±20dB, 1dB steps]
Adjusts the input level of the module and
internal saturation circuits. Set around 0dB
for nominal settings or push higher for more
harmonic saturation.
2. HI LEVEL CONTROL
[±10dB, 0.5dB steps]
Adjusts up to 10dB of boost/cut for the
high
shelf lter
at the frequency set using the HI
FREQUENCY CONTROL [7]. This control
progressively increases the amount of
harmonic saturation added to the signal
above the selected frequency in boost and
cut positions.
3. MID LEVEL CONTROL
[±10dB, 0.5dB steps]
Adjusts up to 10dB of boost/cut for the
mid
peaking lter
at the frequency set using the
MID FREQUENCY CONTROL[9]. This control
progressively increases the amount of
harmonic saturation added to the signal
within the selected frequency in boost and
cut positions.
4. LO LEVEL CONTROL
[±10dB, 0.5dB steps]
Adjusts up to 10dB of boost/cut for the
low
shelf lter
at the frequency set using the lo
FREQUENCY CONTROL [10]. This control
progressively increases the amount of
harmonic saturation added to the signal
above the selected frequency in boost and
cut positions.
10. LO FREQUENCY CONTROL
[20Hz - 420Hz]
Adjusts the corner frequency of the
low
frequency shelf lter
and sets the start
frequency where the harmonic saturation is
ltered into the dry signal.
9. MID FREQUENCY CONTROL
[200Hz - 6.2kHz]
Adjusts the mid-point frequency of the
mid
peaking lter
and sets the start frequency
where the harmonic saturation is ltered
into the dry signal.
7. HI FREQUENCY CONTROL
[5kHz - 25kHz]
Adjusts the corner frequency of the
high
frequency shelf lter
and sets the start
frequency where the harmonic saturation is
ltered into the dry signal.
12. IN SWITCH
[ OFF - ON]
Switches the module IN and OUT of the entire
circuit. LED will illuminate BLUE when the
unit is switched IN. LED will illuminate WHITE
when module is IN and slaved via OPTOSYNC.
11. OPTOSYNC SWITCH
[ OFF - ON]
Switches OPTOSYNC ON or OFF. When the
switch is ON, the module syncs its physical
controls to a second Carnaby 500 to its left.
When ON, the IN LED changes to WHITE and
pulses when controls are adjusted on the
master module. Multiple modules can be
synced for surround mastering or summing.
6. SIGNAL INDICATOR
[RGB LED]
Displays the
output
level of the module post
OUTPUT LEVEL CONTROL [5]. LED lights
GREEN from -12dBu and [CLIP] atRED
+24dBu.
8. BAND SATURATION INDICATOR
[RGB LED]
Indicates how hard the saturation stages are
being driven and how much harmonic
saturation is being added to the dry signal
for each Harmonic EQ
TM
band. LEDs start
illuminating at 3% THD measured at the~
output.
13
Product specificaties
| Merk: | Cranborne Audio |
| Categorie: | Niet gecategoriseerd |
| Model: | Carnaby 500 |
Heb je hulp nodig?
Als je hulp nodig hebt met Cranborne Audio Carnaby 500 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd Cranborne Audio
13 Juni 2025
23 Juni 2024
18 Maart 2024
6 September 2023
19 Juni 2023
Handleiding Niet gecategoriseerd
- Maxview
- GoldenEar Technology
- Bxterra
- Sogo
- Infasecure
- Fixpoint
- Metra
- Sunstech
- TC Electronic
- Harvia
- Yamazen
- Imarflex
- Carmen
- SatKing
- Bernina
Nieuwste handleidingen voor Niet gecategoriseerd
14 Juni 2025
14 Juni 2025
14 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025