Craftsman CMXEOCG231 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Craftsman CMXEOCG231 (84 pagina's) in de categorie Garagepoortopener. Deze handleiding was nuttig voor 29 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/84
Owner's Manual
GARAGE DOOR OPENER
For Residential Use Only
MODEL CMXEOCG231
READ AND FOLLOW ALL SAFETY RULES AND OPERATING INSTRUCTIONS BEFORE FIRST USE OF THIS PRODUCT.
FASTEN THE MANUAL NEAR THE GARAGE DOOR AFTER INSTALLATION.
PERIODIC CHECKS OF THE OPENER ARE REQUIRED TO ENSURE SAFE OPERATION.
DO NOT INSTALL ON A ONE-PIECE DOOR IF USING DEVICES OR FEATURES PROVIDING UNATTENDED CLOSE.
UNATTENDED DEVICES AND FEATURES ARE TO BE USED ONLY WITH SECTIONAL DOORS. SEE PAGE 3.
WWW.CRAFTSMAN.COM
2
INTRODUCTION 2-7
Safety Symbol Review and Signal Word Review . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Unattended Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Preparing your Garage Door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Tools Needed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Planning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5
Carton Inventory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Hardware Inventory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
ASSEMBLY 8-11
Assemble the Rail and Install the Trolley . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Fasten the Rail to the Motor Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Install the Idler Pulley. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Install the Chain/Cable. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Tighten the Chain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
INSTALLATION 11-27
Installation Safety Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Determine the Header Bracket Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Install the Header Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Attach the Rail to the Header Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Position the Opener. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Hang the Opener . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Install the Light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Attach the Emergency Release Rope and Handle . . . . . . . . . . . . . . . . . . . . . . . . . .17
Fasten the Door Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18-19
Connect Door Arm to Trolley . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20-21
Attach the Warning Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Install the Door Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Install the Safety Reversal System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23-25
Electrical Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Aligning the Safety Reversing Sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
ADJUSTMENT 28-30
Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Program the Travel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Test the Safety Reversal System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Test the Safety Reversing Sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
OPERATION 31-35
Important safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Using Your Garage Door Opener . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Using the Door Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
To Erase the Memory. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
To Open the Door Manually . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Care of Your Opener . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
TROUBLESHOOTING 35-36
REPAIR PARTS 37-38
Rail Assembly Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
Installation Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
Motor Unit Assembly Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
ACCESSORIES 39
WARRANTY 39
AUTOMATIC GARAGE DOOR OPENER SAFETY &
MAINTENANCE GUIDE 40-41
TABLE OF CONTENTS
When you see these Safety Symbols and Signal Words on the following pages, they
will alert you to the possibility of if you do not comply with serious injury or death
the warnings that accompany them. The hazard may come from something
mechanical or from electric shock. Read the warnings carefully.
When you see this Signal Word on the following pages, it will alert you to the
possibility of damage to your garage door and/or the garage door opener if you do
not comply with the cautionary statements that accompany it. Read them carefully.
INTRODUCTION
SAFETY SYMBOL AND SIGNAL WORD REVIEW
This garage door opener has been designed and tested to offer safe service provided it is installed, operated, maintained and tested in strict accordance with the
instructions and warnings contained in this manual.
Mechanical
Electrical
WARNING: This product can expose you to chemicals including
lead, which are known to the State of California to cause cancer or
birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov.
UNATTENDED OPERATION
Any device or feature that allows the door to close without being in the line of sight of the door is considered unattended close. Devices that allow unattended operation
are to be used ONLY with sectional doors.
PREPARING YOUR GARAGE DOOR
Before you begin:
1. Disable locks and remove any ropes connected to the garage door.
2. Lift the door halfway up. Release the door. If balanced, it should stay in
place, supported entirely by its springs.
3. Raise and lower the door to check for binding or sticking. If your door
binds, sticks, or is out of balance, call a trained door systems technician.
4. Check the seal on the bottom of the door. Any gap between the floor and
the bottom of the door must not exceed 1/4" (6mm). Otherwise, the safety
reversal system may not work properly.
5. The opener should be installed above the center of the door. If there is a
torsion spring or center bearing plate in the way of the header bracket, it
may be installed within 4feet (1.2 m) to the left or right of the door center.
See page12.
Sectional Door One-Piece Door
To prevent possible SERIOUSINJURYor DEATH:
lALWAYS call a trained door systems technician if garage door binds, sticks,
or is out of balance. An unbalanced garage door may NOT reverse when
required.
lNEVER try to loosen, move or adjust garage door, door springs, cables,
pulleys, brackets or their hardware, ALLof which are under EXTREME
tension.
lDisable ALLlocks and remove ALLropes connected to garage door BEFORE
installation and operating garage door opener to avoid entanglement.
lDO NOT install on a one-piece door if using devices or features providing
unattended close. Unattended devices and features are to be used ONLY
with sectional doors.
To prevent damage to garage door and opener:
lALWAYS disable locks BEFORE installing and operating the opener.
lONLY operate garage door opener at 120V, 60Hz to avoid malfunction and
damage.
TOOLS NEEDED
During assembly, installation and adjustment of the opener, instructions will call for hand tools as illustrated below.
Stepladder
Drill Bits 3/16",
5/16", and 5/32"
Claw Hammer
Carpenter’s Level
(optional) Pencil
Screwdriver
Drill Wire Cutters
Adjustable End Wrench
Tape Measure
Pliers
Sockets and Wrench 1/2",
5/8", 7/16", 9/16", and 1/4"
Hack Saw
3


Product specificaties

Merk: Craftsman
Categorie: Garagepoortopener
Model: CMXEOCG231

Heb je hulp nodig?

Als je hulp nodig hebt met Craftsman CMXEOCG231 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Garagepoortopener Craftsman

Handleiding Garagepoortopener

Nieuwste handleidingen voor Garagepoortopener