Craftsman CMXEDAR300 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Craftsman CMXEDAR300 (20 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 184 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/20
10" (254 mm) Drill Press
10" (254 mm) Perforadora de columna
CMXEDAR300
INSTRUCTION MANUAL | MANUAL DE INSTRUCTIONES
IF YOU HAVE QUESTIONS OR COMMENTS, CONTACT US.
SI TIENE DUDAS O COMENTARIOS, CONTÁCTENOS.
1-888-331-4569 WWW.CRAFTSMAN.COM
English (original instructions) 1
Español (traducido de las instrucciones originales) 21
3
ENGLISH
COMPONENTS
1 Depth scale pointer
2 Feed handles
3 Bevel lock bolt
4 Base
5 Table lock handle
6 Rack ring
7 LED light
8 Quill return coil/spring
9 ON/OFF LED light switch
10 Depth stop nuts
11 Pulley cover
12 Belt tension lock knob
13 Motor
WARNING: Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
seriousinjury.
WARNING: Never modify the product or any part of it.
Damage or personal injury couldresult.
WARNING: To reduce the risk of injury, read the
instructionmanual.
If you have any questions or comments about this
product, call CRAFTSMAN toll free at: 1-888-331-4569.
Definitions: Safety Alert Symbols and Words
This instruction manual uses the following safety alert symbols and words to alert you to hazardous situations and your risk
of personal injury or property damage.
DANGER: will Indicates an imminently hazardous situation which, if not avoided, result in death or seriousinjury.
WARNING: could Indicates a potentially hazardous situation which, if not avoided, result in death or seriousinjury.
CAUTION: may Indicates a potentially hazardous situation which, if not avoided, result in minor or moderateinjury.
(Used without word) Indicates a safety related message.
NOTICE: may propertydamage Indicates a practice which, if not avoided, not related to personal injury result in .
14 Head locking set screws
15 Table crank handle
16 Table bracket
17 Rack
18 Mounting holes
19 Column
20 Table
21 Chuck
22 ON/OFF switch with
safety key
23 Chuck key holder
24 Spindle pulley
25 Motor pulley
24
11
25
Front Rear
Fig. A
1
10
9
2
3
4
5
6
7
811
12
13
14
15
18
19
20
21
22
23
17
16


Product specificaties

Merk: Craftsman
Categorie: Niet gecategoriseerd
Model: CMXEDAR300

Heb je hulp nodig?

Als je hulp nodig hebt met Craftsman CMXEDAR300 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Craftsman

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd