Craftmade McCoy MCY52FB4-PC Handleiding
Pagina's 10 Ventilator
Bekijk de handleiding van Craftmade McCoy MCY52FB4-PC gratis online of download de PDF. Deze handleiding is 1 keer bekeken. Vraag over dit model? Stel een vraag
PRINTED IN CHINA
READ THESE INSTRUCTIONS AND
SAVE THEM FOR FUTURE USE
Table of Contents:
Safety Tips. pg. 2
Unpacking Your Fan. pg. 3
Parts Inventory. pg. 3
Installation Preparation. pg. 4
Hanging Bracket Installation. pg. 4
Fan Assembly. pgs. 5 - 6
Wiring. pg. 6
Canopy Assembly. pg. 7
Blade Assembly. pg. 7
Light Kit Assembly. pg. 8
Testing Your Fan. pg. 9
Troubleshooting. pg. 10
Warranty. pg. 10
Parts Replacement. pg. 10
page 1
net weight of fan: 13.84 lb (6.28 kg)
*PLEASE NOTE:
Parts drawings in
this manual are
representative only
Installation Guide
McCoy
For Model:
MCY52-PC
4007498
page 2
SAFETY TIPS.
READ ALL INSTRUCTIONS AND SAFETY INFORMATION CAREFULLY BEFORE INSTALLING YOUR FAN
AND SAVE THESE INSTRUCTIONS.
WARNING
• To reduce the risk of electrical shock, turn o the electricity to the fan at the main fuse box or circuit panel before you begin the fan
installation or before servicing the fan or installing accessories.
• To reduce the risk of re, electrical shock, or personal injury, mount to the outlet box marked "Acceptable for Fan Support of 15.9 kg (35 lb)
or less," and use the mounting screws provided with the outlet box. Most outlet boxes commonly used for the support of lighting xtures
are not acceptable for fan support and may need to be replaced. Consult a qualied electrician if in doubt.
• To reduce the risk of re, electrical shock, or personal injury, wire connectors provided with this fan are designed to accept only one
12 gauge house wire and two lead wires from the fan. If your house wire is larger than 12 gauge or there is more than one house wire to
connect to the corresponding fan lead wires, consult an electrician for the proper size wire connectors to use.
• To reduce the risk of re or electrical shock, do not use this fan with any solid state speed control device or control fan speed with a full
range dimmer switch. [Using a full range dimmer switch to control fan speed will cause a loud humming noise from fan.]
• To reduce the risk of personal injury, do not bend the blades during assembly or after installation. Do not insert objects into the path of
the blades.
• To reduce the risk of serious bodily injury, DO NOT use power tools to assemble any part of the fan, including the blades.
• To avoid personal injury or damage to the fan and other items, be cautious when working around or cleaning the fan.
• To reduce the risk of personal injury, use only parts provided with this fan. The use of parts OTHER than those provided with this fan
will void the warranty.
• Do NOT tamper with or attempt to repair LED component of light kit. The light source is designed for this specic application and should
not be serviced by untrained personnel. If any servicing is required, call our customer service department.
CAUTION
• To avoid personal injury, the use of gloves may be necessary while handling fan parts with sharp edges.
• Do NOT tamper with or attempt to repair LED component of xture. The light source is designed for this specic application and should
not be serviced by untrained personnel. If any servicing is required, call our customer service department.
• Changes or modications not approved by the party responsible for compliance could void the user's authority to operate the
equipment. [The equipment refers to the remote and/or wall control and/or LED light kit.]
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
* Reorient or relocate the receiving antenna.
* Increase the separation between the equipment and receiver.
* Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
• The LED light kit complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this LED light kit may not
cause harmful interference, (2) this LED light kit must accept any interference received, including interference that may cause undesired
operation.
1. Make sure all electrical connections comply with Local Codes or Ordinances, the National Electrical Code, and ANSI/NFPA 70-1999. If
you are unfamiliar with electrical wiring or if the house/building wires are dierent colors than those referred to in the instructions,
please use a qualied electrician.
2. Make sure you have a location selected for your fan that allows clear space for the blades to rotate, and at least seven (7) feet
(2.13 meters) of clearance between the oor and the fan blade tips. The fan should be mounted so that the tips of the blades are at
least thirty (30) inches (76 centimeters) from walls or other upright structures.
3. The outlet box and ceiling support joist used must be securely mounted, and capable of supporting at least 35 pounds (16 kilograms).
The outlet box must be supported directly by the building structure. Use only ETL or UL listed outlet boxes marked "FOR FAN
SUPPORT."
4. Electrical diagrams are for reference only. L
ight kits that are not packed with the fan must be CETL or CUL (Canada) or ETL or UL
(USA) listed and marked suitable for use with the model fan you are installing. Switches must be CETL or CUL (Canada) or ETL or
UL (USA) general use switches. Refer to the instructions packaged with the light kits and switches for proper assembly.
5. After installation is complete, check that all connections are absolutely secure.
6. After making electrical connections, spliced conductors should be turned upward and pushed carefully up into the outlet box. The
wires should be spread apart with the grounded conductor and the equipment-grounding conductor on opposite sides of the outlet
box.
7. Do not operate the reverse switch until the fan has come to a complete stop.
[Note: If using remote control with reverse capability,
reverse fan blade direction only when on LOW speed.]
8. Do not use detergents when cleaning the fan or fan blades. A dry dust cloth or lightly dampened cloth will be suitable for most
cleaning.
Distributed by: Craftmade, 3901 S. 20
th
Avenue, DFW Airport, TX, 75261; 800-486-4892
NOTE: The important safety precautions and instructions appearing in the manual are not meant to cover all possible conditions and
situations that may occur. It must be understood that common sense and caution are necessary factors in the installation and operation of
this fan.
page 3
1. Unpacking Your Fan.
Carefully open the packaging. Remove items from
Styrofoam inserts. Remove motor housing and
place on carpet or Styrofoam to avoid damage to
finish. Do not discard fan carton or Styrofoam
inserts should this fan need to be returned for
repairs.
Check against parts inventory that all parts have
been included.
2. Parts Inventory.
a. canopy. 1 piece
b. hanging bracket. 1 piece
c. downrod and hanging ball (with pin and clip).
1 piece
d. canopy cover. 1 piece
e. yoke cover. 1 piece
f. motor housing. 1 piece
g. blade. 4 pieces
h. switch housing plate. 1 piece
i. LED light kit. 1 piece
j. shade. 1 piece
k.hardware packs
IMPORTANT REMINDER: You must
use the parts provided with this fan for
proper installation and safety.
k
a
c
b
e
j
*Parts drawings in this manual
are representative only
d
g
i
h
f
Product specificaties
| Merk: | Craftmade |
| Categorie: | Ventilator |
| Model: | McCoy MCY52FB4-PC |
Heb je hulp nodig?
Als je hulp nodig hebt met Craftmade McCoy MCY52FB4-PC stel dan hieronder een vraag en andere gebruikers zullen je antwoorden