Craftbot Plus Handleiding

Bekijk gratis de handleiding van Craftbot Plus (2 pagina’s), behorend tot de categorie 3D Printer. Deze gids werd als nuttig beoordeeld door 54 mensen en kreeg gemiddeld 4.5 sterren uit 3 reviews. Heb je een vraag over Craftbot Plus of wil je andere gebruikers van dit product iets vragen? Stel een vraag

QUICK START GUIDE

Thank you for purchasing a CraftUnique product and welcome to the world of 3D crafting!

You are just a few steps away from having your rst 3D object printed by your brand new CraftBot.

I. UNPACKING

Step #1

You’ve already found the Quick Start Guide. Excellent! Now remove the large sheet resting under the foam.

Under the sheet you will nd your CraftBot attachable accessories in a cardboard cradle resting in the cavity

of the CraftBot 3D printer.

Step #2

Remove this cradle from the box with care and place it in a safe out-of-the-way place.

Step #3

The printer is wrapped in a tight tting plastic protective cover. Open up the covering.

Firmly grasp the frame of the CraftBot and lift it out of the box without touching the fragile inner parts.

CraftBot weights 14 kg (almost 31 lbs) – seek assistance if needed!

Step #4

Place the printer on a stable and level surface with sucient space around.

II. ACCESSORY CHECK

It’s time to unpack additional parts.

Below you can see the contents of the

box. First of all, check the list to make

sure nothing is missing!

1. Filament guide tube holder

2. Filament guide tube

3. Filament spool holder

4. Filament spool

5. Hex wrenches (5x)

6. USB Flash storage

7. USB A-B cable and AC power cable

8. Filament monitoring system (FMS)*

1

4

7

2

5

8

3

6

1234

PLUG&PLAY 3D PRINTER

WITH 5 YEARS WARRANTY

WWW.CRAFTBOT.COM • WWW.CRAFTBOTUSA.COM

Product specificaties